Description

Sets and reads the mode of the PassFail line on the HANDLER IO connector (pin 33). Learn more about Global Pass/Fail.

 VB Syntax

object.PassFailMode = value

Variable

(Type) - Description

object

(object) - An Aux I/O or Handler I/O object

value

(enum as NAPassFailMode).Choose from:
0 - naDefaultPassNoWaitMode- the line stays in PASS state. When a device fails, then the line goes to fail  IMMEDIATELY.

1 - naDefaultPassWaitMode - the line stays in PASS state. When a device fails, then the line goes to fail after the Sweep End line is asserted.

2 - naDefaultFailWaitMode- the line stays in FAIL state. When a device passes, then the line goes to PASS state after the Sweep End line is asserted.

Return Type

Long Integer

Default

0 - naDefaultPassNoWaitMode

Examples

HWAuxIO.PassFailMode = naDefaultPassNoWaitMode 'Write

mode = HWAuxIO.PassFailMode 'Read

C++ Syntax

HRESULT put_PassFailMode ( tagNAPassFailMode Mode );

HRESULT get_PassFailMode ( tagNAPassFailMode* Mode );

Interface

IHWAuxIO

IHWMaterialHandlerIO