Click here to view links to Sweep commands for all Measurement Classes.
Main Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Number of Points | SENSe:SWEep:POINts | ||
X-axis Type | CALCulate:MEASure:X:AXIS:DOMain | XAxisDomain | |
|
|
||
Sweep Timing Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Sweep Time | Auto | SENSe:SWEep:TIME:AUTO | |
Manual | SENSe:SWEep:TIME[:STOP] | ||
Dwell Time | SENSe:SWEep:DWELl | ||
Sweep Delay |
SENSe:SWEep:DWELl:SDELay | ||
Sweep Mode | AUTO | SENSe:SWEep:GENeration | |
STEPPED | SENSe:SWEep:GENeration | ||
Fast Sweep | ON | SENSe:SWEep:SPEed | |
OFF | SENSe:SWEep:SPEed | ||
Source Control Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Pulse Setup... | Pulse Measurement | ||
Off | SENSe:SWEep:PULSe:MODE | ||
Standard Pulse | SENSe:SWEep:PULSe:MODE | ||
Pulse Profile | SENSe:SWEep:PULSe:MODE | ||
Pulse Timing | |||
Pulse Width | SENSe:SWEep:PULSe:PRIMary:WIDth | ||
Pulse Period | SENSe:SWEep:PULSe:PRIMary:PERiod | ||
Pulse Frequency | SENSe:SWEep:PULSe:PRIMary:FREQuency |