Operator's Check

Overview

The Operator's Check should be performed when you first receive your VNA, and any time you wish to have confidence that the VNA is working properly.

Notes

  • The Operator's Check does not verify performance to specifications. To verify VNA performance to specifications, run performance test or System Verification.

  • Allow the VNA to warm up for 90 minutes before considering a failed test to be valid.

 

How to Run the Operator's Check

Using Hardkey/SoftTab/Softkey

  1. Press System > Service > Operator's Check

  1. Follow the instruction to proceed the test.

 

The Operator's Check is executed at power on at default. It can be selected at preference. If some tests are failed, see Trobleshooting Hint for M9485A

Last Modified:

18-May-2016

First Release