CALL:CVALue

Function

Sets/queries the Constant Value . See Initial PRACH TX Power .

This setting can only be changed when call status is Idle . If BCCH Update Page is set to Auto and you change this setting while your UE is camped to the test set, the test set performs a Broadcast Channel (BCCH) Update Procedure (SIB Contents) . If BCCH Update Page is set to Inhibit (the default value) and you change this setting while your UE is camped to the test set, you must force your UE to re-read the BCCH to observe the change (see BCCH Update Page for more details).

Setting

Range: -35 dB to -10 dB

Resolution: 1 dB

Query

Range: -35 dB to -10 dB

Resolution: 1 dB

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:CVALue -20" !Sets the constant value to -20 dB.