Calibrate N107x Series DCA-M
FlexOTO Instance:
Hardware Diagram
Use the N107x tab to perform a clock recovery calibration on an N1078A/B DCA-M clock recovery module.
Click Calibrate to start all selected calibrations. To select the desired calibrations, select or clear the selection icons. These icons are defined in the following table. Click Details to learn the state of the calibration with the elapsed time and temperature since the last calibration.
| Icon | Description |
|---|---|
| Calibration is selected | |
| Calibration is unselected | |
| Calibrations are partially selected | |
|
Calibration is current |
|
Calibration is recommended |
|
Calibration has never been performed |