Setup Commands - Swept IMD Measurement Class

Only the Main and Layout Setup commands corresponding to the Swept IMD measurement class are documented here. All other commands are identical to the Setup commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtabs on the graphic below.

Click here to view links to Setup commands for all Measurement Classes.

Main

Layout

System
Setup

Internal
Hardware

External
Hardware

Main Tab Commands
Softkey	Sub-item	SCPI	COM
IMD Setup...	Frequency
	Sweep Type
	Sweep fc	SENSe:IMD:SWEep:TYPE	SweepType
	Sweep DeltaF	SENSe:IMD:SWEep:TYPE	SweepType
	Power Sweep	SENSe:IMD:SWEep:TYPE	SweepType
	CW	SENSe:IMD:SWEep:TYPE	SweepType
	Segment Sweep fc	SENSe:IMD:SWEep:TYPE	SweepType
	Sweep Settings
	Start fc	SENSe:IMD:FREQuency:FCENter:STARt	FrequencyCenterStart
	Center fc	SENSe:IMD:FREQuency:FCENter:CENTer	FrequencyCenter
	Fixed DeltaF	SENSe:IMD:FREQuency:DFRequency[:CW]	DeltaFrequency
	Number Of Points	SENSe:SWEep:POINt	NumberOfPoints
	Stop fc	SENSe:IMD:FREQuency:FCENter:STOP	FrequencyCenterStop
	Span fc	SENSe:IMD:FREQuency:FCENter:SPAN	FrequencyCenterSpan
	Main Tone IFBW	SENSe:IMD:IFBWidth:MAIN	MainToneIFBandwidth
	IM Tone IFBW	SENSe:IMD:IFBWidth:IMTone	IMToneIFBandwidth
	Reduce IF BW at Low Frequencies	None	None
	Power
	Power On (All Channels)	OUTPut[:STATe]	SourcePowerState
	DUT Input
	Input Port	SENSe:IMD:PMAP	SetPortMap
	Source Attenuator	SOURce:POWer:ATTenuation	Attenuator
	Receiver Attenuator	SENSe:POWer:ATTenuator	ReceiverAttenuator
	DUT Output
	Output Port	SENSe:IMD:PMAP	SetPortMap
	Source Attenuator	SOURce:POWer:ATTenuation	Attenuator
	Receiver Attenuator	SENSe:POWer:ATTenuator	ReceiverAttenuator
	Tone Powers
	Coupled Tone Powers	SENSe:IMD:TPOWer:COUPle[:STATe]	CoupleTonePower
	ALC On	SENSe:IMD:TPOWer:LEV	LevelingMethod
	Power Leveling
	Set Input Power	SENSe:IMD:TPOWer:LEV	LevelingMethod
	Set Input Power, receiver leveling	SENSe:IMD:TPOWer:LEV	LevelingMethod
	Set Input Power, equal tones at output	SENSe:IMD:TPOWer:LEV	LevelingMethod
	Set Output Power, receiver leveling	SENSe:IMD:TPOWer:LEV	LevelingMethod
	Fixed	SENSe:IMD:TPOWer:F1 SENSe:IMD:TPOWer:F2	TonePower
	Start	SENSe:IMD:TPOWer:F1:STARt SENSe:IMD:TPOWer:F2:STARt	TonePowerStart
	Stop	SENSe:IMD:TPOWer:F1:STOP SENSe:IMD:TPOWer:F2:STOP	TonePowerStop
	Step	None	None
	Path Configuration...	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Configure
	Receiver Configuration	SENSe:IMD:RECeiver:CONFig:COMBiner:PATH SENSe:IMD:RECeiver:CONFig:REFerence COUNt	None None
	Add Source...	SENSe:ROLE:DEVice	AssignSourceToRole
Meas Class...		CALCulate:MEASure:DEFine	CreateCustomMeasurementEx
Quick Start...	S-Param	CALCulate:MEASure:PARameter	CreateSParameterEx
	Balanced	CALCulate:MEASure:PARameter	BalSMeasurement BBalMeasurement SBalMeasurement SSBMeasurement
	Other	CALCulate:MEASure:PARameter	CreateSParameterEx
Layout Tab Commands
Softkey	Sub-item	SCPI	COM
New Trace		DISPlay:WINDow:TRACe[:STATe]	View
New Channel		None	chans.Add
New Window		DISPlay:WINDow[:STATe]	Add
New Sheet		DISPlay:SHEet:STATe	None
Delete	TrN	DISPlay:WINDow:TRACe:DELete	None
	ChN	SYSTem:CHANnels:DELete	RemoveChannelNumber
	WinN	DISPlay:WINDow[:STATe]	Add
Select	TrN	DISPlay:WINDow:TRACe:SELect	None
	ChN	None	None
	WinN	DISPlay:WINDow:TRACe:SELect	None
Measure...		CALCulate:MEASure:PARameter	CreateSParameterEx
Meas Class...		CALCulate:MEASure:DEFine	CreateCustomMeasurementEx