System Commands

Main Tab Commands
Softkey	Sub-item	SCPI	COM
Show Taskbar		None	None
Move App to Back		None	None
Minimize Application		None	None
Exit		None	app.Quit
Security...		SYSTem:SECurity[:LEVel]	app.SecurityLevel
Control Panel...		None	None
Manage Files...	List Files	MMEMory:CATalog	None
	Copy Files	MMEMory:COPY	None
	Move Files	MMEMory:MOVE	None
	Delete Files	MMEMory:DELete	None
System Setup Tab Commands
Softkey	Sub-item	SCPI	COM
Next/Prev Keys	Trace	None	None
	Channel	None	None
	Window	None	None
	Sheet	None	None
Preferences...	Avg: On Preset set two-point Group Delay Aperture	SYSTem:PREFerences:ITEM:GDELay:TWOPoint	TwoPointGroupDelayAperture
	Avg: Calculate Group Delay using legacy PNA Math	SYSTem:PREFerences:ITEM:GDELay:LEGacy	LegacyGroupDelayApertureMath
	Cal: Always merge when saving Cal in Cal Set	None	None
	Cal: Always use Internal trigger during cal	None	None
	Cal: ECal Extrapolation for IMD	None	None
	Cal: For Frequency Offset, use Primary frequencies	SENSe:CORRection:PREFerences:CALibration[:FOM]:RANGe	FrequencyOffsetRangeForCalComputations
	Cal: (SCPI only) Auto-generate a User Cal Set	SENSe:CORRection:CSET:CREate	calMgr.CreateCalSet
	Cal: (SCPI only) Auto-save to current Cal Set	SENSe:CORRection:PREFerence:CSET:SAVE	RemoteCalStoragePreference
	Cal: Turn off RF Power after calibration	SYSTem:PREFerence:ITEM:CALibration:SAFE[:STATe]	None
	Cal: Use legacy behavior for Series-C & Shunt-L fixtures	SYSTem:PREFerences:ITEM:FIXTure:CIRCuit:DEFAults	None
	Cal: Use Unknown thru math for SOLT methods	SYSTem:PREFerence:ITEM:USOLt	None
	Display: Selected trace changes width briefly	None	None
	Display: Selected trace is wider	None	None
	Display: Touchscreen On	SYSTem:TOUChscreen[:STATe]	Touchscreen
	Ext Device: De-activate on Preset and Recall	SYSTem:PREFerences:ITEM:EDEV:DPOLicy	ExternalDeviceDeActivatePolicy
	Ext Reference: Modify Settings on Preset and Recall	SYSTem:PREFerences:ITEM:ROSCillator:RECall	None
	Limit: Draw failed trace segments in red	SYSTem:PREFerences:ITEM:RTOF	RedTraceOnFail
	Limit: Draw limit lines in red	SYSTem:PREFerences:ITEM:REDLimits	DrawLimitLinesInRed
	Limit: Test the nearest measurement point	None	None
	Marker: Coupling controls on/off state of markers	SYSTem:PREFerences:ITEM:MCControl	MarkCoupControlsMkrState
	Marker: On Preset, Coupled Markers is On	SYSTem:PREFerences:ITEM:MCPreset	MarkCoupControlsMkrState
	Marker: On Preset, Coupling Method is Channel	SYSTem:PREFerences:ITEM:MCMethod	MarkCoupMethPresetIsChan
	Marker: On Preset, set BW/Notch search reference to Peak	SYSTem:PREFerences:ITEM:MARKer:BANDwidth:SEARch	BandwidthSearch
	Marker: Programming treats Mkr 10 as Reference	SYSTem:PREFerences:ITEM:REFMarker	TreatMkr10AsReference
	Marker: Use single marker for marker search	SYSTem:PREFerences:ITEM:MARKer:SINGle	SingleMarkerSearch
	Meas: Mathematical offset for receiver attenuation	SYSTem:PREFerences:ITEM:OFFSet:RCV	OffsetReceiverAttenuator
	Meas: Mathematical offset for source attenuation	SYSTem:PREFerences:ITEM:OFFSet:SRC	OffsetSourceAttenuator
	Memory: Data Math 8510 Mode	None	None
	Memory: Interpolate ON is default condition	SYSTem:PREFerences:ITEM:MINTerpolate	InterpolateMemoryIsDefault
	Power: On Preset turn power off	SYSTem:PREFerences:ITEM:PRESet:POWer	PresetPowerState
	Power: On Preset turn power on	SYSTem:PREFerences:ITEM:PRESet:POWer	PresetPowerState
	Power: Report source unleveled events as errors	SYSTem:ERRor:REPort:SUNLeveled	EnableSourceUnleveledEvents
	Power: Report when receiver is overloaded	SYSTem:PREFerences:ITEM:RECeivers:CERRor	ReportReceiverOverload
	Power: Force RF power Off at the end of sweep	SYSTem:PREFerences:ITEM:RETRace:POWer	PowerOnDuringRetraceMode
	Power: Turn Source Power Off when receiver is overloaded	SYSTem:PREFerences:ITEM:RECeivers:OVERload:POWer	RFOffOnReceiverOverload
	Power: Use Start Power during Power Sweep retrace	SYSTem:PREFerences:ITEM:PSRTrace	PowerSweepRetracePowerMode
	Preset: Confirm preset	SYSTem:PREFerences:ITEM:PRESet:CONFirm	ConfirmPreset
	Preset: On Preset show Quick Start dialog	SYSTem:PREFerences:ITEM:QSTart	ShowQuickStartOnPreset
	Recall: Softkey order is most recently used	None	None
	Scale: On Preset Couple Scale to Window	None	None
	Sweep: On Preset set Sweep Mode to Stepped	None	None
	Sweep: Use only ramp sweeps for Auto Sweep Mode	SYSTem:PREFerences:ITEM:ASMRamp	None
	System: Enable sound	SYSTem:BEEP:STATe	None
	System: On Power-on show dialog if detect mm testset	None	None
	System: On Power-on show Keys toolbar	SYSTem:PREFerences:ITEM:Keys	ShowkeysToolbarAtPowerOn
	System: Use keyboard to navigate softkeys	SYSTem:PREFerences:ITEM:SOFTkeys:NAVigation	None
	System: Use parallel processing	SYSTem:PREFerences:ITEM:CORRection:PARallel:PROCess	None
	System: Set front panel remote state when a SCPI command is received	SYSTem:PREFerences:ITEM:REMote:AUTO[:STATe]	None
	Trigger: External Trigger Out is Global	TRIGger:PREFerences:AIGLobal	AuxTriggerScopeIsGlobal
	Data Saves...	MMEMory:STORe:DATA	SaveData
	Power Limit...	SYSTem:POWer:LIMit	Limit
	Transparency...	None	None
	User Preset...	SYSTem:UPReset	UserPreset
	Page Setup...	Hardcopy	None
	Disp Colors...	See Display	See Display
	Print Colors...	See Display	See Display
	Global Sources...
	Power On (All Channels)	None	None
	Global Sources Ignore "Power ON" Setting	SYSTem:PREFerences:SOURce:GLOBal:POFF:IGNore[:STATe]	None
	Global	SYSTem:PREFerences:SOURce:GLOBal[:STATe]	None
	State	SYSTem:PREFerences:SOURce:GLOBal:OUTPut[:STATe]	None
	Frequency	SYSTem:PREFerences:SOURce:GLOBal:FREQuency	None
	Power	SYSTem:PREFerences:SOURce:GLOBal:POWer	None
Sound			None
Remote Interface...	GPIB Address	None	app.GPIBAddress
	SICL Enabled	None	app.SICL
	SICL Address	None	app.SICLAddress
	Automatically Enable on Startup	None	None
	Sockets Enabled	None	None
	Telnet Enabled	None	None
	HiSLIP Enabled	None	HiSLIPPort
	HiSLIP Address	None	HiSLIPAddress
	Enable Remote Drive Access	SYSTem:COMMunicate:DRIVe:ENABle?	None
	Show SCPI Parser Console	None	None
	Monitor GPIB Bus	None	None
			LANConfigurationInitialize
			None
Print Tab Commands
Softkey	Sub-item	SCPI	COM
Print...		HCOPy:DPRinter	DoPrint
Print to File...		HCOPy:FILE	PrintToFile
Page Setup...		Hardcopy	None
Print Colors...	Pen
	Background	DISPlay:COLor:BACKground	Background
	Active Background	DISPlay:COLor:ABACkground	ActiveBackground
	Grid	DISPlay:COLor:GRAT2	Grid
	Active Labels, Grid frame	DISPlay:COLor:GRAT1	ActiveLabels
	Inactive Window Labels	DISPlay:COLor:ILABel	InactiveLabels
	Failed Trace	DISPlay:COLor:LIM1	FailedTraces
	N Trace: Data and Limits	DISPlay:COLor:TRACe:DATA	DataAndLimits
	N Trace: Memory	DISPlay:COLor:TRACe:MEMory	Memory
	N Trace: Markers	DISPlay:COLor:TRACe:MARKer	Markers
	N Trace: Memory Markers	DISPlay:COLor:TRACe:MMARker	MemoryMarkers
	Change Color...	None	None
	Reset Color	DISPlay:COLor:RESet	None
	Color Theme
	Save Theme...	DISPlay:COLor:STORe	StoreTheme
	Recall Theme...	DISPlay:COLor:LOAD	LoadTheme
	Reset Theme	DISPlay:COLor:RESet	ResetTheme
Help Tab Commands
Softkey	Sub-item	SCPI	COM
NA Help...		None	None
On The Web...		None	None
Error Display...	Enable Messages	DISPlay:ANNotation:MESSage:STATe	None
	Status bar Display	DISPlay:ANNotation[:STATus]	app.ShowStatusBar
	Confirmation Dialog boxes	None	None
View Error Log...		None	None
Tech Support	PathWave Calibration Advisor Commands	SYSTem:CAPability:LICenses:FEATure:CATalog? SYSTem:CAPability:LICenses:FEATure:ENABle? SYSTem:SERVice:MANagement:CALibration:INFormation? SYSTem:SERVice:MANagement:CALibration:INTerval:DEFault SYSTem:SERVice:MANagement:CALibration:INTerval:TYPE? SYSTem:SERVice:MANagement:CALibration:INTerval[:VALue] SYSTem:SERVice:MANagement:CALibration:NOTification:ENABle SYSTem:SERVice:MANagement:CALibration:PASScode:CHANge SYSTem:SERVice:MANagement:CALibration:PASScode[:VALue] SYSTem:SERVice:MANagement:CALibration:PERiodic:ENABle SYSTem:SERVice:MANagement:CALibration:REMinder	None None None None None None None None None None None
About NA...		None	None
Service Tab Commands
Softkey	Sub-item	SCPI	COM
Update Firmware		None	None
Verification		None	None
Adjustment Routines...		None	None
Diagnostics		None	None
Option Enable		None	None