Setup Commands - Gain Compression Measurement Class

Only the Main and Layout Setup commands corresponding to the Gain Compression measurement class are documented here. All other commands are identical to the Setup commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtabs on the graphic below.

Click here to view links to Setup commands for all Measurement Classes.

Main

Layout

System
Setup

Internal
Hardware

External
Hardware
Main Tab Commands
Softkey Sub-item SCPI
GCA Setup... Frequency
Sweep Type
    Linear Sweep SENSe:SWEep:TYPE
    Log Sweep SENSe:SWEep:TYPE
    Segment Sweep SENSe:SWEep:TYPE
Data Acquisition Mode
    SMART Sweep SENSe:GCSetup:AMODe
    Sweep Power Per Frequency (2D) SENSe:GCSetup:AMODe
    Sweep Frequency Per Power (2D) SENSe:GCSetup:AMODe
Sweep Settings
    Number of Points SENSe:SWEep:POINts
    IF Bandwidth SENSe:BWIDth[:RESolution]
    Start SENSe:FREQuency:STARt
    Stop SENSe:FREQuency:STOP
    Center SENSe:FREQuency:CENTer
    Span SENSe:FREQuency:SPAN
Power
Power On (All Channels) OUTPut[:STATe]
DUT Input Port
    Input Port SENSe:GCSetup:PMAP
    Linear Input Power SENSe:GCSetup:POWer:LINear:INPut:LEVel
    Source Leveling Mode SOURce:POWer:ALC[:MODE]
DUT Output Port
    Output Port SENSe:GCSetup:PMAP
    Reverse Power SENSe:GCSetup:POWer:REVerse:LEVel
    Source Leveling Mode SOURce:POWer:ALC[:MODE]
Power Sweep
    Start (Min) Power SENSe:GCSetup:POWer:STARt:LEVel
    Stop (Max) Power SENSe:GCSetup:POWer:STOP:LEVel
    Power Points SENSe:GCSetup:SWEep:FREQuency:POINts
    Power Step None
Path Configuration... SENSe:PATH:CONFig:ELEMent[:STATe]
Compression
Compression Method
    Compression from Linear Gain SENSe:GCSetup:COMPression:ALGorithm
    Compression from Max Gain SENSe:GCSetup:COMPression:ALGorithm
    Compression from Back Off SENSe:GCSetup:COMPression:ALGorithm
    X/Y Compression SENSe:GCSetup:COMPression:ALGorithm
    Compression from Saturation SENSe:GCSetup:COMPression:ALGorithm
    Level SENSe:GCSetup:COMPression:LEVel
    Back Off SENSe:GCSetup:COMPression:BACKoff:LEVel
    Delta X SENSe:GCSetup:COMPression:DELTa:X
    Delta Y SENSe:GCSetup:COMPression:DELTa:Y
    From Max Pout SENSe:GCSetup:COMPression:SATuration:LEVel
SMART Sweep
    Tolerance SENSe:GCSetup:SMARt:TOLerance
    Maximum Iterations SENSe:GCSetup:SMARt:MITerations
    Show Iterations SENSe:GCSetup:SMARt:SITerations
    Read DC at Compression Point SENSe:GCSetup:SMARt:CDC
    Safe Mode...  
        Safe Mode SENSe:GCSetup:SAFE:ENABle
        Coarse Increment SENSe:GCSetup:SAFE:CPADjustment
        Fine Increment SENSe:GCSetup:SAFE:FPADjustment
        Fine Threshold SENSe:GCSetup:SAFE:FTHReshold
        Max Output Power SENSe:GCSetup:SAFE:MLimit
2D Sweep
    Compression Point Interpolation SENSe:GCSetup:COMPression:INTerpolation
End of Sweep Condition SENSe:GCSetup:EOSoperation
Settling Time SENSe:GCSetup:SMARt:STIMe
Quick Start... S-Param CALCulate:MEASure:PARameter
Balanced CALCulate:MEASure:PARameter
Other CALCulate:MEASure:PARameter
Layout Tab Commands
Softkey Sub-item SCPI
New Trace   DISPlay:WINDow:TRACe[:STATe]
New Channel   None
New Window   DISPlay:WINDow[:STATe]
New Sheet   DISPlay:SHEet:STATe
Delete TrN DISPlay:WINDow:TRACe:DELete
ChN SYSTem:CHANnels:DELete
WinN DISPlay:WINDow[:STATe]
Select TrN DISPlay:WINDow:TRACe:SELect
ChN None
WinN DISPlay:WINDow:TRACe:SELect
Measure... S21, S11, S12, S22,
AI1, AI2,
CompIn21, CompOut21,
DeltaGain21, CompGain21,
CompS11, Ref21,
CompAI1, CompAI2		 CALCulate:MEASure:PARameter
Meas Class...   CALCulate:MEASure:DEFine