Setup Commands - Swept IMD Measurement Class

Only the Main and Layout Setup commands corresponding to the Swept IMD measurement class are documented here. All other commands are identical to the Setup commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtabs on the graphic below.

Click here to view links to Setup commands for all Measurement Classes.

Main

Layout

System
Setup

Internal
Hardware

External
Hardware

Main Tab Commands
Softkey	Sub-item	SCPI
IMD Setup...	Frequency
	Sweep Type
	Sweep fc	SENSe:IMD:SWEep:TYPE
	Sweep DeltaF	SENSe:IMD:SWEep:TYPE
	Power Sweep	SENSe:IMD:SWEep:TYPE
	CW	SENSe:IMD:SWEep:TYPE
	Segment Sweep fc	SENSe:IMD:SWEep:TYPE
	Sweep Settings
	Start fc	SENSe:IMD:FREQuency:FCENter:STARt
	Center fc	SENSe:IMD:FREQuency:FCENter:CENTer
	Fixed DeltaF	SENSe:IMD:FREQuency:DFRequency[:CW]
	Number Of Points	SENSe:SWEep:POINt
	Stop fc	SENSe:IMD:FREQuency:FCENter:STOP
	Span fc	SENSe:IMD:FREQuency:FCENter:SPAN
	Main Tone IFBW	SENSe:IMD:IFBWidth:MAIN
	IM Tone IFBW	SENSe:IMD:IFBWidth:IMTone
	Reduce IF BW at Low Frequencies	None
	Power
	Power On (All Channels)	OUTPut[:STATe]
	DUT Input
	Input Port	SENSe:IMD:PMAP
	Source Attenuator	SOURce:POWer:ATTenuation
	Receiver Attenuator	SENSe:POWer:ATTenuator
	DUT Output
	Output Port	SENSe:IMD:PMAP
	Source Attenuator	SOURce:POWer:ATTenuation
	Receiver Attenuator	SENSe:POWer:ATTenuator
	Tone Powers
	Coupled Tone Powers	SENSe:IMD:TPOWer:COUPle[:STATe]
	ALC On	SENSe:IMD:TPOWer:LEV
	Power Leveling
	Set Input Power	SENSe:IMD:TPOWer:LEV
	Set Input Power, receiver leveling	SENSe:IMD:TPOWer:LEV
	Set Input Power, equal tones at output	SENSe:IMD:TPOWer:LEV
	Set Output Power, receiver leveling	SENSe:IMD:TPOWer:LEV
	Fixed	SENSe:IMD:TPOWer:F1 SENSe:IMD:TPOWer:F2
	Start	SENSe:IMD:TPOWer:F1:STARt SENSe:IMD:TPOWer:F2:STARt
	Stop	SENSe:IMD:TPOWer:F1:STOP SENSe:IMD:TPOWer:F2:STOP
	Step	None
	Path Configuration...	SENSe:PATH:CONFig:ELEMent[:STATe]
	Configure
	Receiver Configuration	SENSe:IMD:RECeiver:CONFig:COMBiner:PATH SENSe:IMD:RECeiver:CONFig:REFerence COUNt
	Add Source...	SENSe:ROLE:DEVice
Meas Class...		CALCulate:MEASure:DEFine
Quick Start...	S-Param	CALCulate:MEASure:PARameter
	Balanced	CALCulate:MEASure:PARameter
	Other	CALCulate:MEASure:PARameter
Layout Tab Commands
Softkey	Sub-item	SCPI
New Trace		DISPlay:WINDow:TRACe[:STATe]
New Channel		None
New Window		DISPlay:WINDow[:STATe]
New Sheet		DISPlay:SHEet:STATe
Delete	TrN	DISPlay:WINDow:TRACe:DELete
	ChN	SYSTem:CHANnels:DELete
	WinN	DISPlay:WINDow[:STATe]
Select	TrN	DISPlay:WINDow:TRACe:SELect
	ChN	None
	WinN	DISPlay:WINDow:TRACe:SELect
Measure...		CALCulate:MEASure:PARameter
Meas Class...		CALCulate:MEASure:DEFine