Only the Main and Layout Setup commands corresponding to the Swept IMD Converters measurement class are documented here. All other commands are identical to the Setup commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtabs on the graphic below.
Click here to view links to Setup commands for all Measurement Classes.
| Main Tab Commands | |||
| Softkey | Sub-item | SCPI |
COM |
| IMDX Setup... | Tone Frequency | ||
| Sweep Type | |||
| Sweep fc | SENSe:IMD:SWEep:TYPE |
SweepType |
|
| Sweep DeltaF | SENSe:IMD:SWEep:TYPE |
SweepType |
|
| Power Sweep | SENSe:IMD:SWEep:TYPE |
SweepType |
|
| CW | SENSe:IMD:SWEep:TYPE |
SweepType |
|
| LO Power Sweep | SENSe:IMD:SWEep:TYPE |
SweepType |
|
| X-Axis Display | |||
| Annotation | CALCulate:MEASure:MIXer:XAXis |
ActiveXAxisRange |
|
| Sweep Settings | |||
| Start fc | SENSe:IMD:FREQuency:FCENter:STARt |
FrequencyCenterStart |
|
| Stop fc | SENSe:IMD:FREQuency:FCENter:STOP |
FrequencyCenterStop |
|
| Center fc | SENSe:IMD:FREQuency:FCENter:CENTer |
FrequencyCenter |
|
| Span fc | SENSe:IMD:FREQuency:FCENter:SPAN |
FrequencyCenterSpan |
|
| Fixed DeltaF | SENSe:IMD:FREQuency:DFRequency[:CW] |
DeltaFrequency |
|
| Number Of Points | SENSe:SWEep:POINt |
NumberOfPoints |
|
| Main Tone IFBW | SENSe:IMD:IFBWidth:MAIN |
MainToneIFBandwidth |
|
| IM Tone IFBW | SENSe:IMD:IFBWidth:IMTone |
IMToneIFBandwidth |
|
| Reduce IF BW at Low Frequencies | None |
None |
|
| Tone Power | |||
| Power On (All Channels) | OUTPut[:STATe] |
SourcePowerState |
|
| DUT Input Port | |||
| Input Port | SENSe:IMD:PMAP |
SetPortMap |
|
| Source Attenuator | SOURce:POWer:ATTenuation |
Attenuator |
|
| Receiver Attenuator | SENSe:POWer:ATTenuator |
ReceiverAttenuator |
|
| DUT Output Port | |||
| Output Port | SENSe:IMD:PMAP |
SetPortMap |
|
| Source Attenuator | SOURce:POWer:ATTenuation |
Attenuator |
|
| Receiver Attenuator | SOURce:POWer:ATTenuation |
ReceiverAttenuator |
|
| Tone Powers | |||
| Coupled Tone Powers | SENSe:IMD:TPOWer:COUPle[:STATe] |
CoupleTonePower |
|
| ALC On | SENSe:IMD:TPOWer:LEV |
LevelingMethod |
|
| Power Leveling |
|
||
| Set Input Power | SENSe:IMD:TPOWer:LEV |
LevelingMethod |
|
| Set Input Power, receiver leveling | SENSe:IMD:TPOWer:LEV |
LevelingMethod |
|
| Set Input Power, equal tones at output | SENSe:IMD:TPOWer:LEV |
LevelingMethod |
|
| Set Output Power, receiver leveling | SENSe:IMD:TPOWer:LEV |
LevelingMethod |
|
| Fixed | SENSe:IMD:TPOWer:F1 SENSe:IMD:TPOWer:F2 |
TonePower |
|
| Start | SENSe:IMD:TPOWer:F1:STARt SENSe:IMD:TPOWer:F2:STARt |
TonePowerStart |
|
| Stop | SENSe:IMD:TPOWer:F1:STOP SENSe:IMD:TPOWer:F2:STOP |
TonePowerStop |
|
| Step | None |
None |
|
| Path Configuration... | SENSe:PATH:CONFig:ELEMent[:STATe] |
Element |
|
| Mixer Frequency | |||
| Input | SENSe:MIXer:CALCulate |
Calculate |
|
| LO1 | SENSe:MIXer:LO:FREQuency:FIXed |
LOFixedFrequency |
|
| Input > LO | SENSe:MIXer:LO:FREQuency:ILTI |
IsInputGreaterThanLO |
|
| Output | SENSe:MIXer:CALCulate |
Calculate |
|
| Mixer Power | |||
| Power On (All Channels) | OUTPut[:STATe] |
SourcePowerState |
|
| LO1 Power | SENSe:MIXer:LO:POWer |
LOPower |
|
| LO2 Power | SENSe:MIXer:LO:POWer |
LOPower |
|
| LO Start Power | SENSe:MIXer:LO:FREQuency:STARt |
LOStartFrequency |
|
| LO Stop Power | SENSe:MIXer:LO:FREQuency:STOP |
LOStopFrequency |
|
| Source Attenuator | SOURce:POWer:ATTenuation |
Attenuator |
|
| Receiver Attenuator | SENSe:POWer:ATTenuator |
ReceiverAttenuator |
|
| Path Configuration... | SENSe:PATH:CONFig:ELEMent[:STATe] |
Element |
|
| Mixer Setup | |||
| Converter Stages | SENSe:MIXer:STAGe |
LOStage |
|
| Recall a previously-configured external source | SENSe:MIXer:LO:NAME |
LOName |
|
| Assign a source to mixer input or LO | SENSe:MIXer:ROLE:DEVice |
AssignSourceToRole |
|
| Read all assigned roles | SENSe:MIXer:ROLE:CATalog? |
GetSourceByRole |
|
| Read the source assigned to a role | SENSe:MIXer:ROLE:DEVice |
GetSourceRoles |
|
| Input Numerator Frac.Mult | SENSe:MIXer:INPut:FREQuency:NUMerator |
InputNumerator |
|
| Input Denominator Frac.Mult | SENSe:MIXer:INPut:FREQuency:DENominator |
InputDenominator |
|
| LO Numerator Frac. Mult. | SENSe:MIXer:LO:FREQuency:NUMerator |
LONumerator |
|
| LO Denominator Frac.Mult | SENSe:MIXer:LO:FREQuency:DENominator |
LODenominator |
|
| Path Configuration... | SENSe:PATH:CONFig:ELEMent[:STATe] |
Element |
|
| Save... | SENSe:MIXer:SAVE |
SaveFile |
|
| Load... | SENSe:MIXer:LOAD |
LoadFile |
|
| Meas Class... | CALCulate:MEASure:DEFine |
CreateCustomMeasurementEx |
|
| Quick Start... | S-Param | CALCulate:MEASure:PARameter |
CreateSParameterEx |
| Balanced | CALCulate:MEASure:PARameter |
BalSMeasurement BBalMeasurement SBalMeasurement SSBMeasurement |
|
| Other | CALCulate:MEASure:PARameter |
CreateSParameterEx |
|
| Layout Tab Commands | |||
| Softkey | Sub-item | SCPI |
COM |
| New Trace | DISPlay:WINDow:TRACe[:STATe] |
View |
|
| New Channel | None |
chans.Add |
|
| New Window | DISPlay:WINDow[:STATe] |
Add |
|
| New Sheet | DISPlay:SHEet:STATe |
None |
|
| Delete | TrN | DISPlay:WINDow:TRACe:DELete |
None |
| ChN | SYSTem:CHANnels:DELete |
RemoveChannelNumber |
|
| WinN | DISPlay:WINDow[:STATe] |
Add |
|
| Select | TrN | DISPlay:WINDow:TRACe:SELect |
None |
| ChN | None |
None |
|
| WinN | DISPlay:WINDow:TRACe:SELect |
None |
|
|
Measure... |
CALCulate:MEASure:PARameter |
CreateSParameterEx |
|
| Meas Class... | CALCulate:MEASure:DEFine |
CreateCustomMeasurementEx |
|