Error and Status Messages
The 89600 VSA may show status and error messages to inform you of a condition that may need attention.
The following illustration shows the location of these messages.
-
Beta Features In Use indicator shows the number of Beta features in use in the current measurement(s).
-
Calibration status messages show the current calibration state for the selected hardware.
-
External reference lock state messages indicate the lock state of the external reference for measurement hardware that has an External Reference In capability
-
Measurement errors indicate an error with the measurement and are shown in popup dialogs.
-
Measurement status messages show the status of the current measurement (for example, if the measurement is in the process of filling the time record).
-
Spectrum Rate indicator displays the speed at which measurements are being made.
-
Trace indicators inform you of conditions that occurred when a trace was created.
For source (signal generator) errors, see Source Error Messages.