[:SENSe]:CORRection:COLLect:METHod:TRL <p1,p2>

(Write-Only) Sets the Cal Method to 2-port TRL calibration. Calibrate for sweeps in BOTH directions.

This Cal Method is NOT available on N9912A.

Use the Guided Calibration interface to:

1. Select the DUT connectors: [:SENSe]:CORRection:COLLect:CONNector

2. Select a TRL Cal Kit: [:SENSe]:CORRection:COLLect:CKIT:LABel

3. Query number of steps:[:SENSe]:CORRection:COLLect:GUIDed:SCOunt

4. Display prompts: [:SENSe]:CORRection:COLLect:GUIDed:STEP:PROMpt

5. Acquire standards: [:SENSe]:CORRection:COLLect:GUIDed:STEP:ACQuire

Relevant Modes

CAT and NA Mode

To Cal in VVM mode, perform a Cal in CAT or NA mode, then switch to VVM mode.

Parameters

<p1,p2>

Port numbers to be calibrated. Choose 1,2.

Examples

CORR:COLL:METH:TRL 1,2

See Cal examples

Query Syntax

Not Applicable

Default

Not Applicable