| Main Tab Commands |
Softkey |
Sub-item |
SCPI |
COM |
Cal
All... |
|
|
|
Correction |
|
|
|
| Src Power Correct |
ON/OFF |
SOURce:POWer:CORRection[:STATe] |
SourcePowerCorrection |
| Interpolation |
ON/OFF |
SENSe:CORRection:INTerpolate[:STATe] |
InterpolateCorrection |
| Properties... |
|
None |
Properties |
| Cal
Sets & Cal Kits Tab Commands |
| Softkey |
Sub-item |
SCPI |
COM |
Cal
Set... |
|
CSET |
|
| Cal Set Viewer |
ON/OFF |
DISPlay:TOOL:CSET[:STATe] |
None |
Cal
Kit... |
|
|
|
ECal |
|
|
|
| Cal
Pod... |
|
|
|
| Fixtures
Tab Commands |
| Softkey |
Sub-item |
SCPI |
COM |
| Apply Fixtures |
ON/OFF |
CALCulate:FSIMulator:STATe |
FixturingState |
| Power Comp... |
Port N |
CALC:FSIM:SEND:POW:PORT:COMP |
EnablePowerCompensation |
Fixture
Setup |
Change order of operations |
CALCulate:FSIMulator:SENDed:OORDer |
None |
2
and 4-port Extrapolate |
CALCulate:FSIMulator:SNP:EXTRapolate |
EnableSnPDataExtrapolation |
| 2-Port Fixturing |
Port
matching ON and OFF |
CALCulate:FSIMulator:SENDed:PMCircuit:STATe |
PortMatchingState |
Reverse
ports |
CALCulate:FSIMulator:SENDed:DEEM:PORT<n>:SNP:REVerse |
Reverse2PortAdapter |
Sets
Port Matching circuit model |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:TYPE |
PortMatchingCktModel |
Sets
Port Matching 'S2P' file name |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:USER:FILename |
strPortMatch_S2PFile |
Sets
Capacitance 'C' value |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:PARameters:C |
PortMatching_C |
Sets
Conductance 'G' value |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:PARameters:G |
PortMatching_G |
Sets
Inductance 'L' value |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:PARameters:L |
PortMatching_L |
Sets
Resistance 'R' value |
CALCulate:FSIMulator:SENDed:PMCircuit:PORT:PARameters:R |
PortMatching_R |
De-embed
ON and OFF |
CALCulate:FSIMulator:SENDed:DEEMbed:STATe |
Port2PdeembedState |
Sets
De-embedding circuit model |
CALCulate:FSIMulator:SENDed:DEEMbed:PORT |
Port2PdeembedCktModel |
Sets
De-embedding 'S2P' file name |
CALCulate:FSIMulator:SENDed:DEEM:PORT:USER:FILename |
strPort2Pdeembed_S2PFile |
Port
Impedance ON and OFF |
CALCulate:FSIMulator:SENDed:ZCONversion:STATe |
PortArbzState |
Port Z Real |
CALCulate:FSIMulator:SENDed:ZCONversion:PORT:REAL |
PortArbzReal |
Port
Z Imag |
CALCulate:FSIMulator:SENDed:ZCONversion:PORT:IMAG |
PortArbzImag |
Port
Z Real and Imag |
CALCulate:FSIMulator:SENDed:ZCONversion:PORT:Z0 |
PortArbzZ0 |
| Remote
ONLY |
Create
Cal Set with De-embeded fixture removed |
CSET:FIXTure:DEEMbed |
Deembed |
Create
Cal Set with Matching network included |
CSET:FIXTure:EMBed |
Embed |
Cal
Plane Manager... |
|
|
|