Power Commands - Active Hot Parameters

Only the Main and Leveling & Offsets Power commands corresponding to the Active Hot Parameters measurement classes are documented here. The Port Power and Attenuators commands are identical to the Attenuator commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtab on the graphic below.

Click here to view links to Power commands for all Measurement Classes.

Main

Port Power

Leveling
& Offsets

Attenuators

Main Tab Commands
Softkey Sub-item SCPI

COM

Power Level   SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] DISPlay:GUI:POWer:SPIN:RESolution

TestPortPower

PowerSpinResolution

RF Power ON/OFF OUTPut[:STATe] SENSe:ACTive:DISPlay:TRACe:IPWer

SourcePortMode

DisplayInputPower

Start Power   SOURce:POWer:PORT:STARt

StartPower

Stop Power   SOURce:POWer:PORT:STOP

StopPower

Power and Attenuators...

     

AHP Setup...

     
Leveling & Offsets Tab Commands
Softkey Sub-item SCPI

COM

Select Port 1 None

SourcePortMode

Port 2 None

SourcePortMode

Port 3 None

SourcePortMode

Port 4 None

SourcePortMode

Slope ON/OFF SOURce:POWer[:LEVel]:SLOPe:STATe

PowerSlopeState

Power Slope SOURce:POWer[:LEVel]:SLOPe

PowerSlope

Offset   SOURce:POWer:CORRection:OFFSet:MAGNitude

PowerOffset

Limit ON/OFF SYSTem:POWer:LIMit:STATe

State

Power Limit SYSTem:POWer:LIMit

Limit

Offsets and Limits... Power Limit - State SYSTem:POWer:LIMit:STATe

State

Power Limit - Limit SYSTem:POWer:LIMit

Limit

Source Power SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]

TestPortPower

Power Offset SOURce:POWer:ALC[:MODE]:RECeiver:OFFSet

PowerOffset

Port Power SOURce:POWer:PORT:STARt SOURce:POWer:PORT:STOP

StartPower

StopPower