Controls the Spectrum Analyzer Application Coherence and modulation distortion settings.
CComPtr<ISpectrumAnalyzer4> SA; CComPtr<ICoherenceSA> sacoherence; SA->GetCoherence(&sacoherence); |
Method |
InterfaceSee History |
Description |
---|---|---|
Property |
Interface |
Description |
ICoherenceSA |
Sets and returns the data display mode. |
|
ICoherenceSA |
Enables/disables multitone image rejection. |
|
ICoherenceSA |
Sets and returns the multitone harmonic rejection. |
|
ICoherenceSA2 |
Sets and returns the Nyquist protection level. |
|
ICoherenceSA |
Sets and returns the multitone image rejection period. |
|
ICoherenceSA |
Sets and returns the multitone image rejection offset frequency. |
|
ICoherenceSA2 |
Returns the current multitone settings and determine if they are valid or not. |
|
ICoherenceSA |
Sets and returns the tone spacing of the multitone signal. |
|
ICoherenceSA2 |
Sets and returns the phase display minimum level. |
|
ICoherenceSA2 |
Enables/disables phase computing. |
|
ICoherenceSA |
Sets and returns the ON/OFF state of the vector averaging. |
|
ICoherenceSA |
Sets and returns the vector averaging value. |
|
ICoherenceSA |
Returns the current maximum available vector averaging value. |
Interface |
Introduced with VNA Rev: |
ICoherenceSA |
12.80 |
ICoherenceSA2 |
12.90 |