Tutorials

Creating a 1xEV-DO Rev. A Forward Configuration	This procedure shows you how to configure a multicarrier forward link signal useful for component, transmitter, and power amplifier (MCPA) testing.
Creating a 1xEV-DO Rev. A Reverse Configuration	This procedure shows you how to configure a multicarrier reverse link signal.
Using Predefined Configurations	This procedure shows you how to using a predefined configuration can help you create a multicarrier and mixed format waveform and speed the time it takes to create a waveform to meet your test needs.
Creating a Waveform Sequence	This procedure gives instruction on creating a sequence of waveforms by adding, inserting, and appending waveforms together in the desired order.
Using the System Configuration Wizard	This procedure steps you through connecting to a new or previously configured hardware setup.
Creating and Exporting Waveforms	This procedure describes how to create and export waveform files for use with most instruments, such as the M9381A PXI Vector Signal Generator.
Creating and Exporting Waveforms for the EXT	This procedure describes how to create and export a waveform file to the EXT. This is an alternate method to using a live connection.
Configuring the M9381A for Signal Studio	This procedure describes the steps unique to M9381A PXIe configurations with Signal Studio products.

Creating a 1xEV-DO Rev. A Forward Configuration

This procedure shows you how to configure a multicarrier forward link signal useful for component, transmitter, and power amplifier (MCPA) testing.

Creating a 1xEV-DO Rev. A Reverse Configuration

This procedure shows you how to configure a multicarrier reverse link signal.

Using Predefined Configurations

This procedure shows you how to using a predefined configuration can help you create a multicarrier and mixed format waveform and speed the time it takes to create a waveform to meet your test needs.

Creating a Waveform Sequence

This procedure gives instruction on creating a sequence of waveforms by adding, inserting, and appending waveforms together in the desired order.

Using the System Configuration Wizard

This procedure steps you through connecting to a new or previously configured hardware setup.

Creating and Exporting Waveforms

This procedure describes how to create and export waveform files for use with most instruments, such as the M9381A PXI Vector Signal Generator.

Creating and Exporting Waveforms for the EXT

This procedure describes how to create and export a waveform file to the EXT. This is an alternate method to using a live connection.

Configuring the M9381A for Signal Studio

This procedure describes the steps unique to M9381A PXIe configurations with Signal Studio products.