Setting Measurement Parameters (cdma2000/1xEV-DV)

The following table shows how measurement parameters affect cdma2000 demodulation.

cdma2000 Demodulation Parameters
Time Sequence	Parameters Involved	Effect	Result	Notes
Signal setup	Range Trigger Frequency/span Input User Corrections	Sets up basic signal parameters required for demodulation	Raw data	Any changes made in the signal setup parameters later in the time sequence require that a new measurement be performed
Demodulation	Demodulation Setup parameters: Chip Rate Direction Long Code Mask Base Walsh Code Length PN Offset Walsh Code QOF Multicarrier Filter Active Channel Threshold	Determines the type of demodulation performed on the input time data	Demodulated, symbol-locked data in the default display format	Result length determines the amount of data that is demodulated.
Post-demodulation	Meas Offset Meas Interval Walsh Code Number Despread Channel Walsh Code Length CDP Layer Walsh Code Length	Specifies channel and determines how much data is used for the trace data results.	Demodulated data in the default display format.	Changes may be made in the display parameters without acquiring a new measurement
Display Formatting	Trace data Trace format X and Y Scale Marker Normalize IQ Traces	Formats the data for display	Formatted, demodulated data	Changes may be made in the display parameters without acquiring a new measurement