File | Instrument | Response | Stimulus | Utility | Cal | Apps | Remote ONLY
Save /Recall | Manage Files | Manage Folders | Print | Read Clock
Preset (User) | Security | Configure
Hdwr & Capabilities | Macros | Status | GPIB Pass-through | VISA Pass-through | Preferences
|
SCPI |
||
|---|---|---|
|
Preset |
|
|
|
Preset plus delete window |
|
|
Frequency Blanking |
|
|
Local Lockout |
|
|
Set and return GPIB address |
None |
|
Set VNA to GPIB system controller or talker/listener |
None |
|
Set and return SICL address |
None |
|
Control the VNA via SICL |
None |
|
Return Full computer name |
None |
|
System Impedance |
|
|
Load Test Set Config file and Restart VNA. |
|
|
Hardware |
|
|
IO Configuration |
None |
|
Modify the manufacturer name |
|
|
Reset to original manufacturer identification |
|
|
Modify the product model |
|
|
Reset to original product model name |
|
|
Set and return Source Port Control |
|
|
DSP Revision |
|
|
DSP FPGA |
|
|
CPU Speed |
|
|
Hostname |
|
|
Disk Drive Version |
|
|
Set and return the coupler state |
|
|
Returns the word size (32 or 64). |
|
|
Many queries regarding the capability of a specific VNA |
|
|
Execute Macro |
|
|
Delete Macro |
|
|
Write macro path, argument, and title |
|
|
Read macro path, argument, and title |
|
|
Status Registers |
|
|
*OPC;*WAI |
|
|
Open a GPIB pass-through session |
None |
|
|
Write string data to the GPIB pass-through device. |
None |
|
|
Write data to the GPIB pass-through device - with header. |
None |
|
|
Write data to the GPIB pass-through device - without header. |
None |
|
|
Reads string data from the GPIB pass-through device. |
None |
|
|
Closes a GPIB pass-through session |
None |
|
|
Closes ALL GPIB pass-through sessions |
None |
|
|
Returns list of visa address strings or aliases. |
|
|
Sets timeout value for VISA pass-through commands. |
|
|
Reset Preference default settings |
|
|
Selected trace is wider |
None |
|
Selected trace changes width briefly |
None |
|
Cal: Auto-save User Cal Set |
|
|
Cal: For Guided Cal, set external trigger |
|
|
Cal: For Unguided Cal, set external trigger |
|
|
Cal: Simulated Cal Behavior |
|
|
Cal: Use Primary FOM (for mmWave) |
|
|
Memory: Data Math 8510 Mode |
None |
|
Power: RF power On during frequency sweep retrace |
|
|
Power: Power Sweep Retrace |
|
|
Trigger: External Trigger OUT is Global |
|
|
Meas: Port 1 Noise Tuner Switch state |
|
|
Meas: Mathematical offset for receiver attenuation |
|
|
Meas: Mathematical offset for source attenuation |
|
|
Limit: Draw failed trace segments in red |
|
|
Limit: Draw limit lines in red |
|
|
Marker: Programming treats Mkr 10 as Reference |
|
|
Markers: On Preset, Coupled Markers is ON |
|
|
Markers: On Preset, Coupling Method is Channel |
|
|
Markers: Coupling controls on|off state of markers. |
|
|
Marker: Use single marker for marker search |
|
|
Marker: Sets the bandwidth search preference |
|
|
Ext Device: de-activate on PRESET and recall. |
|
|
Avg: On PRESET set two-point group delay aperture |
|
|
Power: On PRESET always turn power ON |
|
|
Power: Report source unleveled events as errors |
|
|
Power: Turn source power OFF when receiver is overloaded |
|
|
Power: Report when receiver is overloaded |
|
|
Preset: Confirm preset |
|
|
Preset: On PRESET show Quick Start dialog |
|
|
Controls the on/off state of the preference, "Use keyboard to navigate softkeys" |
|
|
System: Enable Sound |
|
|
System: Set limit test warning sound |
|
|
System: Set sound after operation completion |
|
|
System: On Power-on show Keys toolbar |
|
|
Sweep: Use only ramp sweeps for Auto Sweep Mode |
|
|
More buttons |
|
|
Define Data Saves |
|
|
User Preset |
|
|
Printer Page Setup |
|
|
Power Limit |
|
|
Display and Print Colors |
|
|
Returns Structured status of the VNA networking configuration. |
None |
|
Returns string status of the VNA networking configuration. |
None |
|
Resets the VNA LAN configuration. |
None |
|
Modifies settings of the VNA computer networking configuration. |
None |
|
Displays the LAN Status dialog with LAN Status Indicator showing IDENTIFY. |
|
|
Enable the display of Error Messages |
|
|
Timed vs Dialog messages |
None |