File | Instrument | Response | Stimulus | Utility | Cal | Apps | Remote ONLY
Measurements | Balanced Meas | Auxiliary | Conversions | Format | Scale| Elect Delay | Constants | Math | Equation Editor | Statistics | Uncertainty Analysis | Limits | Bandwidth Tests | Ripple Tests | Transform | Gating | Window | Coupling | Distance Markers | Avg | IFBW | Smoothing | Group Delay | Cal | Marker Functions | Marker Search Functions
Show | Hide: Status Bar | Toolbar | Tables | Marker Disp
|
Description |
SCPI |
|
|---|---|---|
|
Speed up Measurements ! |
||
|
Measurement Trace On|Off |
|
|
|
Display Update On|Off |
|
|
|
Window Update On|Off |
|
|
|
Analyzer Visible On|Off |
|
|
|
Measurement display update |
|
|
|
AuxInN Source Port N |
|
|
Off |
|
|
Z-Reflect |
|
|
Z-Transmit |
|
|
Z-Trans-Shunt |
|
|
Y-Reflect |
|
|
Y-Transmit |
|
|
Y-Trans-Shunt |
|
|
1 / S |
|
|
Conjugation |
|
|
Log Mag |
|
|
Lin Mag |
|
|
Phase |
|
|
Delay |
|
|
Smith |
|
|
Polar |
|
|
SWR |
|
|
Real |
|
|
Imaginary |
|
|
Unwrapped Phase |
|
|
Positive Phase |
|
|
Inverted Smith |
|
|
Group Delay Aperture Percent of Span |
|
|
Group Delay Aperture Frequency |
|
|
Set Preference to 2 points |
|
|
Set or return the units for the specified data format |
|
|
Temperature |
|
|
AutoScale |
|
|
AutoScale All |
|
|
Per Division |
|
|
Reference Level |
|
|
Reference Position |
|
|
Scale Coupling |
|
|
Set method |
|
|
Enable window |
|
|
Electrical Delay |
|
|
Delay in distance |
|
|
Set units for distance |
|
|
Velocity Factor |
|
|
Media |
|
|
Wavegd Cutoff |
|
|
System Z0 |
|
|
Phase Offset |
|
|
Mag Offset |
|
|
Mag Slope |
|
|
Data Trace ON|OFF |
|
|
Memory Trace ON|OFF |
|
|
Data =>Memory |
|
|
Memory data interpolation ON|OFF |
|
|
Data Math (Add|Sub|Mult|Div) |
|
|
Delay data processing to end of sweep |
|
|
Turn ON / OFF equation |
|
|
Set equation |
|
|
Return validity of equation |
|
|
Returns the functions in DLL |
|
|
Imports the functions in DLL |
|
|
Is DLL Imported? |
|
|
Remove a DLL |
|
|
Statistics ON|OFF |
|
|
Statistics Range |
|
|
Domain Range Start |
|
|
Domain Range Stop |
|
|
Set Type (Pk-Pk|StdDev|Mean) |
|
|
Get All Statistics Data |
|
|
Get Standard Deviation |
|
|
Get Mean |
|
|
Get Peak to Peak |
|
|
Get formatted data array of multiple traces |
|
|
Get corrected data array of multiple traces |
|
|
Executes the statistical analysis |
|
|
Trace |
CALCulate:MEASure:UNCertainty:DISPlay:CFACtor |
|
Trace Type |
CALCulate:MEASure:UNCertainty:DISPlay:TYPE |
|
Noise |
CALCulate:MEASure:UNCertainty:MODE:NOISe |
|
Repeatability |
CALCulate:MEASure:UNCertainty:MODE:CABLe:REPeat |
|
Calibration |
CALCulate:MEASure:UNCertainty:MODE:ETERm |
|
Save uncertainty data |
CALCulate:MEASure:UNCertainty:SAVE |
|
Display Lines ON|OFF |
|
|
Fail Sound ON|OFF |
|
|
Testing ON|OFF |
|
|
Limit Test Failed |
|
|
Count Limit Lines |
None |
|
Read Test Results |
|
|
Set / Read entire Limit Line |
|
|
Limit Line Type (Max|Min) |
|
|
Begin Stimulus |
|
|
End Stimulus |
|
|
Begin Response |
|
|
End Response |
|
|
Read the bandwidth test results for the active trace of selected channel. |
|
|
Read the stimulus values at all the measurement points that failed the limit test for the active trace of selected channel. |
|
|
Reads the number of the measurement points that failed the limit test, for the active trace of selected channel. |
|
|
Delete all limit line data |
|
|
Show Limit table |
|
|
Show / hide the pass/fail dialog. |
|
|
Sets the policy used to compute the global pass/fail value. |
|
|
Reads the most recent pass/fail status value. |
|
|
Sets the logic of the AuxIO PassFail line. |
|
|
Sets the default logical pass/fail state. |
|
|
Sets the scope (Global or channel) of AuxIO pass/fail testing. |
|
|
Set bandwidth threshold value of bandwidth test. |
|
|
Turn ON/OFF the bandwidth value display of the bandwidth test. |
|
|
Get the bandwidth limit test results. |
|
|
Set/get the upper limit value of the bandwidth test. |
|
|
Set/get the lower limit value of the bandwidth test. |
|
|
Get the bandwidth value of the bandwidth test. |
|
|
Turn ON/OFF the bandwidth test function. |
|
|
Set or return the ripple limit table |
|
|
Turn ON/OFF the ripple limit line display |
|
|
Set/get the ripple limit band |
|
|
Set/get the display type of ripple value |
|
|
Read the ripple test result |
|
|
Read the ripple value |
|
|
Turn ON/OFF the ripple test function |
|
|
Sets the alignment of the time domain measurement. |
|
|
Transform ON|OFF |
|
|
Mode (LowPass, BandPass) |
|
|
Start Time |
|
|
Stop Time |
|
|
Center |
|
|
Span |
|
|
Step Rise Time |
|
|
Set Low Pass Frequency |
|
|
Set/get the impulse width |
|
|
TD Toolbar |
|
|
ON|OFF |
|
|
Type (BandPass, Notch) |
|
|
Shape |
|
|
Start |
|
|
Stop |
|
|
Center |
|
|
Span |
|
|
Set gate coupling parameters |
|
|
Kaiser Beta |
|
|
Impulse Width |
|
|
Enable trace coupling |
|
|
Set transform coupling parameters |
|
|
Specify measurement type for distance markers |
|
|
Specify units for distance markers |
|
|
Set and return marker distance value |
|
|
Average ON|OFF |
|
|
Average Factor |
|
|
Return the Average Count |
None |
|
Average Type |
|
|
Average Restart |
|
|
IF Bandwidth |
|
|
Previous IF Bandwidth |
None |
|
Next IFBandwidth |
None |
|
Reduce IF BW |
|
|
Smoothing ON|OFF |
|
|
Smoothing Percent |
|
|
Smoothing Points |
|
|
ON|OFF |
|
|
Delete All Markers |
|
|
Delete Marker |
|
|
Delta Marker |
|
|
Viewing Marker readouts |
|
|
Get a handle to Ref marker |
None |
|
Reference Marker On | Off |
|
|
Set and read X-axis location |
|
|
Set and read Y-axis location |
|
|
Interpolate All Markers (Discrete) |
None |
|
Interpolate Individ. Marker (Discrete) |
|
|
Type (Normal | Fixed) |
|
|
Format Individ. Marker |
|
|
Coupled Markers |
|
|
Coupled Markers Method |
|
|
Read/Set Data Point number |
|
|
Read/Set X-axis value |
|
|
Read/Set Y-axis value |
|
|
Marker=> SA |
|
|
Marker=> Span |
|
|
Marker=> Center (Freq) |
|
|
Marker=> CW Freq and change sweep type |
|
|
Marker=> Start (Freq) |
|
|
Marker=> Stop (Freq) |
|
|
Marker=> Elect. Delay |
|
|
Marker=> Ref. Level |
|
|
Marker=> CW Freq - No sweep type change |
|
|
Read Band Power |
|
|
Read Band Power Span |
|
|
Set Band Power State |
|
|
Read Band Noise |
|
|
Read Band Noise Span |
|
|
Set Band Noise State |
|
|
Compression Marker level found. |
|
|
Read Compression Marker Input power |
|
|
Read Compression Marker Output power |
|
|
Search function |
|
|
Turn ON|OFF the compression state |
|
|
Execute function |
|
|
Initiate a PSAT search |
|
|
Set and read PSAT backoff |
|
|
Read PSat Out |
|
|
Read PSat In |
|
|
Read PMax Out |
|
|
Read PMax In |
|
|
Read Gain Sat |
|
|
Read Gain Max |
|
|
Read Gain Linear |
|
|
Read Comp Sat |
CALCulate:MEASure:MARKer:PSATuration:COMPression:SATuration? |
|
Read Comp Max |
|
|
Turn ON|OFF PSAT marker search |
|
|
Initiate a PNOP search |
|
|
PNOP backoff |
|
|
PNOP Power Offset |
|
|
Read Pnop Out |
|
|
Read Pnop in |
|
|
Read Pnop Gain |
|
|
Read Pnop Comp |
|
|
Read PMax Out |
|
|
Read PMax In |
|
|
Read Gain Max |
|
|
Read Comp Max |
|
|
Read PBO Out |
|
|
Read PBO In |
|
|
Read PBO Gain |
|
|
Turn ON|OFF PNOP marker search |
|
|
Execute Search |
|
|
Select Search Function |
|
|
Maximum |
|
|
Minimum |
|
|
Target (Value) |
|
|
Select transition type |
|
|
Excursion Value |
|
|
Threshold Value |
|
|
Set or return polarity of the peak search |
|
|
Assign Marker to Domain |
|
|
Domain Range Start |
|
|
Domain Range Stop |
|
|
Tracking |
|
|
Bandwidth (Target) |
|
|
Search Filter Bandwidth |
|
|
Read Filter BandWidth |
|
|
Read Filter Center Freq |
|
|
Read Filter Loss |
|
|
Read Filter Q |
|
|
Set bandwidth marker function reference to either MARKer or PEAK |
|
|
Read notch search result |
|
|
Notch Search |
|
|
Notch Ref To |
|
|
Notch Level |
|
|
Multi Peak Search |
|
|
Peak Threshold |
|
|
Peak Excursion |
|
|
Peak Polarity |
|
|
Multi Target Search |
|
|
Target Value |
|
|
Set or return search type of the multi search |
|
|
Turn ON|OFF search tracking |
|
|
Transition |
|
|
Status Bar On|Off |
|
|
Toolbars On|Off |
|
|
Title Bars On|Off |
None |
|
Tables On|Off |
|
|
Data/Memory Trace |
|
|
Memory Trace On|Off |
|
|
Marker Readout On|Off |
|
|
Marker Readout Size |
|
|
Readouts Per Trace |
|
|
Stimulus decimal places |
|
|
Response decimal places |
|
|
Readout position: X-axis |
|
|
Readout position: Y-axis |
|
|
Marker symbol |
|