Message 119

Message

Unable to normalize: "reason"

Where, the italicized text represents text that varies based on the situation that caused the message.

Description

The Waveform Signal Processing operators that are listed below allow you to manually enter tap values. This message is displayed if FlexDCA cannot normalize the gain of entered tap values. An example of this message would be:

Unable to normalize: The DC Gain is negative

This message can be reported for these operators:

Linear Feed Forward Equalizer.
TDECQ Reference Equalizer.
TDECQ Reference Equalize as a secondary operator to the Reference Rx operator.

This message is displayed in the message area and is reported as a programming error message.