Message 188

Message

{0} is not available in the DUT-based setup experience.

Description

Simulated modules are not available in TDR mode when using TDR mode's recommended TDR DUT Based Setup. This setup dialog is opened by clicking the TDR Setup button on TDR mode's Setup toolbar.

Normally, FlexDCA must be in Oscilloscope, Eye/Mask, or Jitter mode before you can use a simulated module. However, TDR mode does offer an alternate basic TDR setup dialog that does allow the use of a simulated electrical module. However, the basic setup is not recommended. To open the basic TDR setup dialog, click the Setup > TDR Basic Control menu command.