Keysight N7731A Switch Setup
Use this Setup dialog to configure the paths within the connected Keysight N7731A optical switch. To open this dialog, click Setup > Modules > N7731A (Slot N) Switching Matrix. Or, click the Switch tile located along the bottom of FlexDCA.
The information is this topic applies to situations where you want to control an optical switch from FlexDCA for troubleshooting purposes. When using the FlexOTO application, always use FlexOTO to setup the optical switch paths.
The N7731A includes two identical 1 x 4 switches: 1 and 2. The following N7734A dialog screen capture shows a 1 x 4 Switch 1 with port A connected to port 3.
