Main Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Averaging | On/Off | SENSe:AVERage[:STATe] SENSe:AVERage:COUNt (STATus:OPERation:AVERaging) | Averaging AveragingFactor |
Averaging Restart | SENSe:AVERage:CLEar | AveragingRestart | |
Average Type |
|
AverageMode | |
IF Bandwidth | SENSe:BANDwidth | BWIDth[:RESolution] | IFBandwidth | |
(Spectrum Analyzer Measurement Class only) |
|
||
(Modulation Distortion Measurement Class only) |
|
None None |
|
Detector Type (Spectrum Analyzer Measurement Class only) |
|
||
Main Tone IFBW (Swept IMD and Swept IMD Converters Measurement Classes only) | SENSe:IMD:IFBWidth:MAIN | MainToneIFBandwidth | |
IM Tone IFBW (Swept IMD and Swept IMD Converters Measurement Classes only) | SENSe:IMD:IFBWidth:IMTone | IMToneIFBandwidth | |
ReduceIFBandwidth | |||
Noise Avg (Noise Figure and Noise Figure Converters Measurement Classes only) |
|
NoiseAverageFactor | |
Noise BW (Noise Figure and Noise Figure Converters Measurement Classes only) |
720.000 kHz |
NoiseBandwidth | |
1.20000 MHz | |||
RBW Ratio (Phase Noise Measurement Class only) |
|
None |
|
Smoothing Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Smoothing | ON/OFF | CALCulate:MEASure:SMOothing[:STATe] | Smoothing |
Smooth Percent | CALCulate:MEASure:SMOothing:APERture | SmoothingAperture | |
Smooth Points | CALCulate:MEASure:SMOothing:POINts | None | |
Delay Aperture Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Aperture Percent | CALCulate:MEASure:GDELay:PERCent | Percent | |
Aperture Points | CALCulate:MEASure:GDELay:POINts | Points | |
Aperture Freq | CALCulate:MEASure:GDELay:FREQuency | Frequency |