:MEASure:EYE:PAM:SKEW:LEVel

Flex Apps:
FlexDCA
Meas. mode:
Eye
Waveform type:
PAM4/6/8
PAM Measurements
Level Skews Commands

Command Syntax

:MEASure:EYE:PAM:SKEW:LEVel LEVel{0:7}

Query Syntax

:MEASure:EYE:PAM:SKEW:LEVel?

Description

Selects the eye diagram's level on which to perform the :MEASure:EYE:PAM:SKEW measurement. The LEVel2 and LEVel3 arguments apply only to PAM4 signals. If you experience difficulties measuring a PAM4 signal, confirm that the signal-type setting is set to PAM4 with the :CHANnel:SIGNal:TYPE command.

NRZ Waveform
PAM4 Waveform
PAM6 Waveform
PAM8 Waveform

Requires FlexDCA revision A.04.50 and above.