Setup Commands - IM Spectrum Measurement Class

Only the Main and Layout Setup commands corresponding to the IM Spectrum measurement class are documented here. All other commands are identical to the Setup commands for the Standard measurement class and can be accessed by clicking here or by clicking on the softtabs on the graphic below.

Click here to view links to Setup commands for all Measurement Classes.

Main

Layout

System
Setup

Internal
Hardware

External
Hardware

Main Tab Commands
Softkey	Sub-item	SCPI	COM
IMS Setup...	Frequency
	Sweep Type
	Linear	SENSe:IMS:SWEep:TYPE	SweepType
	2nd Order Spectrum	SENSe:IMS:SWEep:TYPE	SweepType
	3rd Order Spectrum	SENSe:IMS:SWEep:TYPE	SweepType
	Nth Order Spectrum	SENSe:IMS:SWEep:TYPE	SweepType
	Order N	SENSe:IMS:SWEep:ORDer	SweepOrder
	Resolution BW	SENSe:IMS:RBW	ResolutionBW
	Stimulus Settings
	fc (Tone Center)	SENSe:IMS:STIMulus:FCENter	FrequencyCenter
	Delta F	SENSe:IMS:STIMulus:DFRequency	DeltaFrequency
	f1	SENSe:IMS:STIMulus:F1FRequency	F1Frequency
	f2	SENSe:IMS:STIMulus:F2FRequency	F2Frequency
	Response Settings
	Start Spectrum	SENSe:IMS:RESPonse:STARt	SpectrumStartFrequency
	Stop Spectrum	SENSe:IMS:RESPonse:STOP	SpectrumStopFrequency
	Center Spectrum	SENSe:IMS:RESPonse:CENTer	SpectrumCenterFrequency
	Span Spectrum	SENSe:IMS:RESPonse:SPAN	SpectrumSpanFrequency
	Power
	Power On (All Channels)	OUTPut[:STATe]	SourcePowerState
	DUT Input
	Input Port	SENSe:IMS:PMAP	SetPortMap
	Source Attenuator	SOURce:POWer:ATTenuation	Attenuator
	Receiver Attenuator	SENSe:POWer:ATTenuator	ReceiverAttenuator
	DUT Output
	Output Port	SENSe:IMS:PMAP	SetPortMap
	Source Attenuator	SOURce:POWer:ATTenuation	Attenuator
	Receiver Attenuator	SENSe:POWer:ATTenuator	ReceiverAttenuator
	Tone Powers
	Coupled Tone Powers	SENSe:IMS:TPOWer:COUPle[:STATe]	CoupleTonePower
	ALC On	SENSe:IMS:TPOWer:LEVel	LevelingMethod
	Power Leveling
	Set Input Power	SENSe:IMS:TPOWer:LEVel	LevelingMethod
	Set Input Power, receiver leveling	SENSe:IMS:TPOWer:LEVel	LevelingMethod
	Set Input Power, equal tones at output	SENSe:IMS:TPOWer:LEVel	LevelingMethod
	Set Output Power, receiver leveling	SENSe:IMS:TPOWer:LEVel	LevelingMethod
	Fixed	SENSe:IMS:STIMulus:TPOWer:F1 SENSe:IMS:STIMulus:TPOWer:F2	TonePower
	Path Configuration...	SENSe:PATH:CONFig:ELEMent[:STATe]	Element
	Tracking
	Tracking Enable	SENSe:IMS:TRACking:STATe	TrackingEnable
	Tracking Channel	SENSe:IMS:TRACking:CHANnel	TrackingChannel
	Step Mode
	Automatic Step	SENSe:IMS:TRACking:MSENable	TrackingManualStepEnable
	Manual Step	SENSe:IMS:TRACking:MSENable	TrackingManualStepEnable
	Stimulus Point	SENSe:IMS:TRACking:SINDex	TrackingStepIndex
	Configure
	Add Source...	SENSe:ROLE:DEVice	AssignSourceToRole
Meas Class...		CALCulate:MEASure:DEFine	CreateCustomMeasurementEx
Quick Start...	S-Param	CALCulate:MEASure:PARameter	CreateSParameterEx
	Balanced	CALCulate:MEASure:PARameter	BalSMeasurement BBalMeasurement SBalMeasurement SSBMeasurement
	Other	CALCulate:MEASure:PARameter	CreateSParameterEx
Layout Tab Commands
Softkey	Sub-item	SCPI	COM
New Trace		DISPlay:WINDow:TRACe[:STATe]	View
New Channel		None	chans.Add
New Window		DISPlay:WINDow[:STATe]	Add
New Sheet		DISPlay:SHEet:STATe	None
Delete	TrN	DISPlay:WINDow:TRACe:DELete	None
	ChN	SYSTem:CHANnels:DELete	RemoveChannelNumber
	WinN	DISPlay:WINDow[:STATe]	Add
Select	TrN	DISPlay:WINDow:TRACe:SELect	None
	ChN	None	None
	WinN	DISPlay:WINDow:TRACe:SELect	None
Measure...		CALCulate:MEASure:PARameter	CreateSParameterEx
Meas Class...		CALCulate:MEASure:DEFine	CreateCustomMeasurementEx