Step 5. Configure Acquisition

Instrument:
UXR Scope
Flex Apps:
FlexRT
FlexRT Essentials

If you loaded the TDECQ setup in step 2, the settings shown in this step have already been configured.

  1. In the Infiniium Scope Setup dialog, select the Acquisition tab. You could also view this tab by clicking the Acquisition tile located at the bottom of FlexRT's display.

    2. Note that the Units and Symbol Rate settings are identical to the same settings located in the Timebase tab.

  2. If desired, make changes to the waveform Interpolation settings. Most of the time you can leave these setting on Automatic detection.