Click here to view links to Sweep commands for all Measurement Classes.
Main Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Number of Points |
SENSe:SWEep:POINts | ||
Start | SENSe:FREQuency:STARt | ||
Stop |
SENSe:FREQuency:STOP | ||
|
|||
Sweep Timing Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Sweep Time | Auto | SENSe:SWEep:TIME:AUTO | |
Manual | SENSe:SWEep:TIME[:STOP] | ||
Dwell Time | SENSe:SWEep:DWELl | ||
Sweep Delay | SENSe:SWEep:DWELl:SDELay | ||
Sweep Mode |
AUTO |
||
STEPPED |
|||
Sweep Sequence | STD | SENSe:SWEep:GENeration:POINtsweep | |
POINT | SENSe:SWEep:GENeration:POINtsweep | ||
Fast Sweep | ON | SENSe:SWEep:SPEed | |
OFF | SENSe:SWEep:SPEed | ||
Source Control Tab Commands | |||
Softkey | Sub-item | SCPI | COM |
Pulse Measurement |
|||
Off |
|||
Standard Pulse |
|||
Pulse Profile |
|||
Pulse Timing |
|||
Pulse Width |
|||
Pulse Period |
|||
Pulse Frequency |
|||
Properties |
|||
Autoselect Pulse Detection Method |
|||
Narrowband |
|||
Wideband |
|||
SW Gating |
|||
Autoselect IF Path Gain and Loss |
None |
||
IF Path... |
|||
Optimize Pulse Frequency |
|||
Autoselect Profile Sweep Time |
|||
IFBW |
|||
Sweep Time |
|||
Number of Points |
|||
PulseOffAlcMode |
|||
Measurement Timing |
|||
Width |
|||
Delay |
|||
Pulse Gen |
|||
Master Pulse Trigger |
|||
Autoselect Width & Delay |
|||
Autoselect Pulse Generators |
|||
Pulse Generators... |
|||
Width |
|||
Delay |
|||
Invert |
|||
Enable |
|||
Trigger |
|||
Frequency |
|||
Period |
|||
Enable Source x Modulator |
|||
Modulator Drive |
|||
Offset Pulse using Modulator and ADC Delays |
|||
Modulator Delay |
|||
Fixed ADC Delay |
|||
Synchronize ADCs using pulse trigger |
|||
Pulse4 Output Indicates |
|||
All ADC Activity |
None |
||
Trace ADC Activity |
None |
||
Pulse Trigger... |
|
|
|
Trigger Source |
|||
Trigger Level/Edge |
|||
Synchronize ADCs using pulse trigger |
|||
|
|
||
Enable DC Outputs |
|||
State |
|||
Start DC |
|||
Stop DC |
|||
Limits... |
|||
State |
|||
Min |
|||
Max |