CALL:STATus

Function

Queries the status of the call. See Call Connection State .

Query

Range: CALL|CONN|HAND|IDLE|PAG|REG|REL|SREQ

Only IDLE is returned in FDD Test operating mode.

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Test Application Revision: A.05 and above added CALL

Lab Application Revision: B.01 and above added CALL

Programming Example

 
OUTPUT 714;"CALL:STATus?"
! Returns the current call processing state.

Function

Queries the current level of the acquisition indicator channel. This query is not applicable to FDD Test operating mode. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision: A.02 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:AICHannel?"

Function

Queries the current state of the acquisition indicator channel. This query is not applicable to FDD Test operating mode. See Downlink Code Channel Information .

Query

Range: 0|1

*RST Setting

Requirements

Test Application Revision: A.02 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:AICHannel:STATe?"

Function

Queries the actual sum of the power of all code channels transmitted on antenna 1 of the serving cell.

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range:

• -165 dBm/3.84 MHz to +37 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
• 9.91 E+37 (NAN) is returned if CALL:STATus:ANTenna1:POWer:STATe? is OFF

Resolution: 0.01 dB

Units: dBm/3.84 MHz

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna1:POWer:AMPLitude?" 

Function

Queries the On/Off state of the CALL:STATus:ANTenna1:POWer[:AMPLitude]? .

Query

Range: 1|ON|0|OFF

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna1:POWer:STATe?"

Function

Queries the Current Antenna 2 P-CPICH level

Query

Range: -20.00 to 0dB, 9.91E+37

Resolution: 0.01(dB)

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:CPIChannel:LEVel?"

Function

Queries the Current Antenna 2 S-CPICH level .

Query

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:CPIChannel:SECondary:LEVel?"

Function

Queries the Last Signaled S-CPICH Power Offset .

Query

Range:-6.0 to 0.0, 9.91 E+37 (NaN)

(If a S-CPICH Power Offset value has not been signalled to the UE since the last preset or since the test set was powered up, then NaN is returned.)

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:CPIChannel:SECondary:LEVel:SIGNaled"

Function

Queries the On/Off state of Current Antenna 2 S-CPICH level .

Query

Range: 0|1

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:CPIChannel:SECondary:STATe?"

Function

Queries the On/Off state of Current Antenna 2 P-CPICH level .

Query

Range: 0|1

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:CPIChannel:STATe?"

Function

Queries the actual sum of the power of all code channels transmitted on antenna 2 of the serving cell.

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range:

• -165 dBm/3.84 MHz to +37 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
• 9.91 E+37 (NAN) is returned if CALL:STATus:ANTenna2:POWer:STATe? is OFF

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:POWer:AMPLitude?" 

Function

Queries the On/Off state of the CALL:STATus:ANTenna2:POWer[:AMPLitude]? .

Query

Range: 1|ON|0|OFF

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ANTenna2:POWer:STATe?"

Function

Queries the attached state of the UE. See GMM State .

Query

Range:

• ATT - attached
• ATTINC - attach incomplete
• DET - detached
• NONE

*RST Setting

Requirements

Test Application Revision: A.08.20 and above

Lab Application Revision: A.02 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ATTached:STATe?"

Function

Queries the current power level of the additive white Gaussian noise (AWGN) source. AWGN power level is set using the CALL:AWGNoise commands.

The optional [:SELected] mnemonic in this command specifies that the AWGN power level being queried applies to the current system type (FDD is currently the only system type available).

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range:

• -165 dBm/3.84 MHz to +35 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
• 9.91 E+37 (NAN) is returned if CALL:STATus:AWGNoise[:INTernal]:POWer:STATe? is OFF

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:AWGNoise:POWer?" 
!Queries the current AWGN power.

Function

Queries the current on/off state of the additive white Gaussian noise (AWGN) source. AWGN power level on/off state is set using the CALL:AWGNoise commands.

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:AWGNoise:POWer:STATe?"

Function

Queries the Current BetaEd Gain E-AGCH Table .

This result returns the BetaEd Gain E-AGCH Table currently in use by the UE to interpret the absolute grant value indices signalled on E-AGCH.

Query

Range: 0|1

*RST Setting

Requirements

Test or Lab Application Revision: G.01.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:BEDGain:EAGChannel:TSELection?"

Function

Queries the current level of the primary common control physical channel. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above.

Test Application Revision A.06 changed *RST Setting to -5.3 dB.

Lab Application Revision C.01 changed *RST Setting to -5.3 dB.

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:PRIMary?"

Function

Queries the current state of the primary common control physical channel. See Downlink Code Channel Information .

Query

Range: 0|1

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:PRIMary:STATe?"

Function

Queries the current level of the cell 2 primary common control physical channel. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:PRIMary:CELL2?"

Function

Queries the current state of the cell 2 primary common control physical channel. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: 0|1

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:PRIMary:CELL2:STATe?"

Function

Queries the current level of the secondary common control physical channel. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision: A.02 and above

Lab Application Revision: A.01 and above

Test Application Revision A.06 changed *RST Setting to -10.3 dB.

Lab Application Revision C.01 changed *RST Setting to -10.3 dB.

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:SECondary?"

Function

Queries the current state of the secondary common control physical channel. See Downlink Code Channel Information .

Query

Range: 0|1

*RST Setting

Requirements

Test Application Revision: A.02 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CCPChannel:SECondary:STATe?"

Function

Queries the current cell power level. Cell power is set using the CALL:POWer commands.

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range:

• -165 dBm/3.84 MHz to +37 dBm/3.84 MHz, NAN (this is the range of settings accepted, see Cell Power, AWGN Power and Total RF Power Ranges for the actual hardware range of the source)
• 9.91 E+37 (NAN) is returned if CALL:STATus:CELL[1]:POWer:STATe? is OFF

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:POWer:AMPLitude?" 

Function

Queries the current state of the cell power setting. Cell power state is set using the CALL:POWer commands.

See Cell Power and AWGN Power for more information about desired versus current power levels.

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:POWer:STATe?"

Function

Queries the current system type that the test set is currently emulating.

When the test set is in active cell operating mode (see CALL:OPERating ) the current system type is selected by the CALL:SYSTem command. (Active cell operating mode is not available in the initial W-CDMA test application release.)

When the test set is in any test mode operating mode (see CALL:OPERating ) or CW operating mode, this command will return the corresponding system type.

Query

Range: FDD|CW

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:SYSTem?"

Function

Queries the current cell 2 power level. (See Cell 2 Overview ).

Query

Range:

• -165 dBm/3.84 MHz to +37dBm/3.84 MHz, 9.91 E+37
  (-115 dBm/3.84 MHz to -13 dBm/3.84 MHz actual hardware range with amplitude offset = 0)

  The actual power range is defined by adding the value of the associated amplitude offset to the range above. For example, if amplitude offset is -3.5 dB, then the power range will be -118.5 dBm/3.84 MHz to -16.5 dBm/3.84 MHz.

Resolution: 0.01 dBm/3.84 MHz

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL2:POWer?" 

Function

Queries the current state of the cell 2 power setting. (See Cell 2 Overview ).

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL2:POWer:STATe?"

Function

Queries the current Maximum DL DPCH power. This is the actual upper limit of allowed adjustment to the DL DPCH Level currently in use by the test set if the Downlink Power Control State is set to On.

Query

Range: -30.0 to 20.0, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:DPCHannel:LEVel:MAXimum?"

Function

Queries the current state of Real-time DPC Information statistic, which determines whether the test set is currently gathering real-time Downlink Power Control Information or not.

Query

Range: RECording|IDLE

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor:RECord?"

Function

Queries how many DPCH_Ec/Ior has been gathered.

Query

Range: 0 to 30000, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor:RECord:COUNt?"

Function

Queries the Ratio of DPCH_Ec/Ior exceeded threshold.

Query

Range: 0.0 to 100.0, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor:RATio?"

Function

Queries the Average DPCH_Ec/Ior.

Query

Range: -30.0 to 0.0, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor?"

Function

Queries the Maximum DPCH_Ec/Ior.

Query

Range: -30.0 to 0.0, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor:MAXimum?"

Function

Queries the Minimum DPCH_Ec/Ior.

Query

Range: -30.0 to 0.0, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: G.00.09 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CLPControl:DOWNlink:ECIor:MINimum?"

Function

Queries Compressed Mode State/Overall CM (see Enabling/Disabling Compressed Mode ).

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: B.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:COMPressed:STATe?"

Function

Queries which TGPSs are currently active. The first num value corresponds to the First TGPS , the second num value corresponds to the Second TGPS , etc. See Enabling/Disabling Compressed Mode .

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: D.00.04 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:COMPressed:TGPSequence:ALL:STATe?"

Function

Queries the Current DRX Activated State.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:DRX:ACTivated:STATe?"

Function

Queries the current DTX Activated State.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:DTX:ACTivated:STATe?"

Function

Queries the number of DTX Cycle 1 to Cycle 2 transitions.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:DTX:TRANsition:C1Cycle2:COUNt?" 

Function

Queries the Current HS-SCCH-less Activated State.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:HLESs:ACTivated?"

Function

Queries the TB size that is being used in the primary serving cell for HS-SCCH-less operation.

Query

Range: 137 to 1483 bits, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:HLESs:TBSize?" 

Function

Queries the Number of Incomplete preambles for CQI.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:CQI:PREamble:INComplete:COUNt?" 

Function

Queries the Number of missing CQI transmission.

This result returns the number of missing CQI transmission since the result was last reset.

Query

Range: 0 to 150,000, 9.91 E+37

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:CQI:MISSing:COUNt?" 

Function

Queries the Number of Incomplete Postamble for CQI.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:CQI:PREamble:INComplete:COUNt?" 

Function

Queries the Number of incorrect CQI transmissions.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:CQI:INCorrect:TRANsmission:COUNt?" 

Function

Queries the Number of DPCCH Burst 1 Transmissions.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt:COUNt?" 

Function

Queries the Number of DPCCH Burst 2 Transmissions.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt2:COUNt?" 

Function

Queries the Number of Incomplete Postambles for DPCCH burst 1.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt1:INComplete:POSTamble:COUNt?"

Function

Queries the Number of Incompleted preamble for DPCCH burst 1.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;!CALL:STATus:CPC:MS:DPCChannel:BURSt1:INComplete:PREamble:COUNt?"

Function

Queries the Number of Incomplete Postambles for DPCCH burst 2.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt2:INComplete:POSTamble:COUNt?"

Function

Queries the Number of Incompleted preamble for DPCCH burst 2.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt2:INComplete:PREamble:COUNt?"

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt1:INComplete:COUNt?" 

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:BURSt2:INComplete:COUNt?" 

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DPCChannel:INCorrect:SLOT:COUNt?" 

Function

Queries whether the DL DRX configuration has been successfully configured in the UE.

This result is only available in Active Cell mode.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DRX:CONFigured?"

Function

Queries whether UL DTX configuration has been successfully configured in the UE.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:DTX:CONFigured?"

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:EDCHannel:POSTamble:INComplete:COUNt?" 

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:EDCHannel:PREamble:INComplete:COUNt?" 

Function

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:EDCHannel:INCorrect:TRANsmission:COUNt?" 

Function

Queries whether HS-SCCH-less configuration has been successfully configured in the UE.

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:HLESs:CONFigured?"

Function

Queries the Number of Incomplete postambles for the HS-DPCCH ACK/NACK.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:HSDPcchannel:POSTamble:INComplete:COUNt?" 

Function

Queries the Number of DTX received for HSDPA transmission in those TTI that UE won't monitor due to CPC DRX since the result last reset.

The "Expected DTX from HS-DPCCH " and "Unexpected ACK/NACK from HS-DPCCH" results are reset to NaN when any one of the following occurs:

• "UE DRX Configured turns to "True" in Active Cell operating mode or "CPC Configured" turns to "True" for FDD Test mode;
• Measurement Reset or Clear UE Info action is performed;
• Operating change, or when a new call is established in Active Cell (i.e. when the Call Status changes from Idle to Setup).
• In FDD Test mode, when "Channel Type" changes to/ from "HSPA Only" or when "Channel Type" is "HSPA Only" and "F-DPCH State" changes to/from "Off";
• When any one of the DPCCH or CPC DRX Statistic results exceeds 150,000.

Query

Range: 0 to 150,000, 9.91 E+37 (Null)

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:HSDPcchannel:DTX:EXPected:COUNt?" 

Function

Queries the Number of Incomplete preambles for the HS-DPCCH ACK/NACK.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:HSDPcchannel:PREamble:INComplete:COUNt?" 

Function

Queries the number of Unexpected ACK/NACK from HS-DPCCH.

The "Expected DTX from HS-DPCCH " and "Unexpected ACK/NACK from HS-DPCCH" results are reset to NaN when any one of the following occurs:

• "UE DRX Configured turns to "True" in Active Cell operating mode or "CPC Configured" turns to "True" for FDD Test mode;
• Measurement Reset or Clear UE Info action is performed;
• Operating change, or when a new call is established in Active Cell (i.e. when the Call Status changes from Idle to Setup).
• In FDD Test mode, when "Channel Type" changes to/ from "HSPA Only" or when "Channel Type" is "HSPA Only" and "F-DPCH State" changes to/from "Off";
• When any one of the DPCCH or CPC DRX Statistic results exceeds 150,000.

Query

Range: 0 to 150,000, 9.91 E+37

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:HSDPcchannel:UNEXpected:COUNt?" 

Function

Queries the Number of incorrect compressed mode frames.

Query

Range: 0 to 150,000, 9.91 E+37

Resolution: 0.01

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:CPC:MS:INCorrect:CMFRame:COUNt?" 

Function

Queries the current common pilot channel's power. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Test Application Revision A.06 changed *RST Setting to -3.3 dB.

Lab Application Revision C.01 changed *RST Setting to -3.3 dB.

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel?" 

Function

Queries the current cell1 CPICH power level in dBm (current Cell Power + current CPICH level). See Downlink Code Channel Information .

Query

Range: -165.00 dBm to +37.00 dBm, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel:POWer?" 

Function

Queries the current state of the common pilot channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel:STATe?"

Function

Queries the current cell 2 common pilot channel's power. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel:CELL2?" 

Function

Queries the current cell2 CPICH power level in dBm (current Cell 2 Power + current Cell 2 CPICH level). See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: -165.00 dBm to +37.00 dBm, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel:CELL2:POWer?" 

Function

Queries the current state of the cell 2 common pilot channel. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CPIChannel:CELL2:STATe?"

Function

Queries the status of the data connection. See Data Connection State .

Query

Range: ATTG|DET|IDLE|OFF|PDPAG|PDP|PDPD

*RST Setting

Requirements

Test Application Revision: A.03 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DATA?"
! Returns the current data connection state.

Function

Queries the current downlink frequecny.

Query

Range (in MHz):

• 2110 to 2170,
• 1930 to 1990,
• 1805 to 1880,
• 869 to 894,
• 2620 to 2690,
• 925 to 960
• 1475.9 to 1495.9
• 728 to 746
• 746 to 756
• 758 to 768
• 791 to 821
• 1495.9 to 1510.9

*RST Setting

Requirements

Test Application Revision: A.18.00 and Lab Application Revision H.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DOWNlink:FREQuency?" 

Function

Queries the current dedicated physical channel's power. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel?" 

Function

Queries the current state of the dedicated physical channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:STATe?"

Function

Queries the current cell 2 dedicated physical channel's power. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:CELL2?" 

Function

Queries the current state of the cell 2 dedicated physical channel. See Cell 2 Overview and Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:CELL2:STATe?"

Function

Queries the current power gain of the dedicated physical control channel (DPCCH) see Uplink DPCH Bc/Bd Control .

Query

Range: 1 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.03 and above

Lab Application Revision: A.01 and above

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, range is 1 to 15 (vs. 2 to 15)

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:CURCbeta?"

Function

Queries the current power gain of the dedicated physical data channel (DPDCH) see Uplink DPCH Bc/Bd Control .

Query

Range: 0 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.03 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:CURDbeta?"

Function

Query

Range: 0 to 38400

Resolution: 256

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:DPCHannel:OFFSet?"

Function

Query

Range: -20.00 dB to 0.00 dB, 9.91E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EAGChannel?"

Function

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EAGChannel:STATe?"

Function

Query

Range: 0 to 22996 bits, 9.91E+37

Resolution: 1 bit

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EDCHannel:BLOCk:SIZE?"

Function

Query

Range: 0 to 22996 bits, 9.91E+37

Resolution: 1 bit

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EDCHannel:BLOCk:SIZE:AVERage?"

Function

Query

Range: 0 to 22996 bits, 9.91E+37

Resolution: 1 bit

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EDCHannel:BLOCk:SIZE:MAXimum?"

Function

Query

Range: 0 to 22996 bits, 9.91E+37

Resolution: 1 bit

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EDCHannel:BLOCk:SIZE:MINimum?"

Function

Query

Range: 0 to 11500 kbps, 9.91E+37

Resolution: 1 kbps

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EDCHannel:IBTHroughput?"

Function

Query

Range: DLONly|DLUL|NONE

*RST Setting

Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:STATus:EFACh:CONFigure?"		

Function

Query

Range: -20.00 dB to 0.00 dB, 9.91E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EHIChannel?"

Function

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EHIChannel:STATe?"

Function

Query

Range: 0 to 150000, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EHIChannel:ACK?"

Function

Query

Range: 0 to 150000, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:EHIChannel:NACK?"

Function

Query

Range: -20.00 dB to 0.00 dB, 9.91E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ERGChannel?"

Function

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ERGChannel:STATe?"

Function

Query

Range: 0 to 127, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi?"

Function

Query

Range: 0 to 127, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.17.00 and above, with the required feature license
Lab Application Revision: G.01.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi:BOOSt?"

Function

Query

Range: REC(recording)|IDLE

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi:RECord?"

Function

Queries the Recorded E-TFCI Values . This result always returns 50 comma-separated numbers; Number of E-TFCI Results Recorded E-TFCI values, followed by NANs (9.91E+37).

Query

Range: 0 to 127, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi:RECord:ALL?"

Function

Query

Range: 0 to 50

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.12 and above, with the required feature license

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi:RECord:COUNt?"

Function

Query

Range: An array of 50 values, each element of the array has the following range:

- NONE (No value recorded)
- GCRC (Good CRC)
- BCRC (Bad CRC)
- DTX (EDPDCH subframe is DTX'd for an E-DCH TTI transmission)

*RST Setting

Requirements

Lab Application Revision: E.00.34 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:ETFCi:RECord:FRAMe:INDicator?"

Function

Queries the Current Info, Frequency Band .

Query

Range: BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8|BAND9|BAND10|
BAND11|BAND12|BAND13|BAND14|BAND19|BAND20|BAND21

*RST Setting

Requirements

Test Application Revision: A.08 and above.

Test Application Revision A.09, added BAND8 and BAND9.

Lab Application Revision: C.03 and above.

Lab Application Revision C.04 and D.00, added BAND8 and BAND9.

Test Application Revision A.10.01 and Lab Application Revision D.01.01 added BAND7

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, added BAND10

Test Application Revision A.13 and Lab Application Revision E.00.34, added BAND11

Test Application Revision A.14 and Lab Application Revision F.00, added BAND12, BAND13, BAND14

Test Application Revision A.18.00 and Lab Application Revision F.00, added BAND19, BAND20 and BAND21

Programming Example

 
OUTPUT 714;"CALL:STATus:FBINdicator?"

Function

Query

Range: 120 to 42192

Resolution: 1

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.14 and Lab Application Revision F.00 and above, range extended.

Lab Application Revision: I.00.00 and above, this result returns the current HS-DSCH primary transport block size in use when Current MIMO Configuration State is Active .

Programming Example

 
OUTPUT 714;"CALL:STATus:HSDSchannel:TBSize?" 

Function

Query

Range: 137 to 27952

Resolution: 1

*RST Setting

Requirements

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:HSDSchannel:TBSize:PSData?" 

Function

Queries the Number of Available HS-PDSCHs OVSF Codes .

Query

Range: 0 to 15, 9.91 E+37

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSPDschannel:AVAilable:COUNt?" 

Function

Queries the current sum of the powers in all of the active HS-PDSCH channels. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSPDschannel:LEVel?" 

Function

Queries the current state of the HS-PDSCH channels. See Downlink Code Channel Information .

Query

Range:

• 1 (on) - power is present in one or more HS-PDSCHs
• 0 (off) - no power is present in any HS-PDSCH

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSPDschannel:STATe?"

Function

Queries the current HS-SCCH 1 power level. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel?" 

Function

Queries the current state of the HS-SCCH 1 channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel:STATe?"

Function

Queries the current HS-SCCH 2 power level. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel2?" 

Function

Queries the current state of the HS-SCCH 2 channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel2:STATe?"

Function

Queries the current HS-SCCH 3 power level. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel3?" 

Function

Queries the current state of the HS-SCCH 3 channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel3:STATe?"

Function

Queries the current HS-SCCH 4 power level. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel4?" 

Function

Queries the current state of the HS-SCCH 4 channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.08 and above, with the required feature license

Lab Application Revision: C.03 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:HSSCchannel4:STATe?"

Function

Queries the Maximum Allowed CQI Value.

Query

Range: 0 to 30, 9.91 E+37

Resolution: 1

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MAXimum:ALLowed:CQI:VALue?"

Function

Queries Multi-Cell UTRAN Status.

Query

Range: NONE|MAIN|MLOC|MEXT|MSHO|AUX|AACT

*RST Setting

Requirements

Lab Application Revision: F.01 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:MCELl?"

Function

Queries if MIMO operation is currently active.

Query

Range: ACTive|INACtive

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:MIMO?"

Function

Queries MM Status .

Query

Range:

• MMSTATUS1 (Updated (Normal))
• MMSTATUS2 (Updated (Periodic))
• MMSTATUS3 (IMSI Attached)
• MMSTATUS4 (IMSI Detached)
• MMSTATUS5 (None)

*RST Setting

Requirements

Test Application Revision: A.05 and above.

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:MM?"

Function

Queries the "Last Signaled Measurement Power Offset".

Query

Range: -6.0 to +13.0 9.91E+37

Unit: dB

*RST Setting

Requirements

Lab Application Revision: E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MPOWer:OFFSet:SIGNaled?"

Function

Queries Current UE HS-DSCH Category .

Query

Range: 1-24, 9.91E+37

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.10 and Lab Application Revision D.01 added UE categories 7 and 8

Lab Application Revision F.00.07 expanded range from "1-8, 11, 12" to "1-14, 17, 18"

Lab Application Revision H.00.00 added UE categories 21, 22, 23, 24

Lab Application Revision I.00.00 added UE categories15, 16, 19, 20

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:HSDSchannel:CATegory?"

Function

Queries the Current DUT IPv4 Address.

Query

Range: "" (Null) or 15 characters of standard IPv4 address formatted as: A.B.C.D, where A, B, C, and D are between 0 and 255

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess:IP4?"

Function

Queries the Current DUT IPv6 IID. This is the IID part of the negotiated DUT IPv6 address. The DUT IPv6 address is formed by combining the DUT IPv6 IID with the link-local prefix or the IPv6 Prefix. The testset assigns DUT IPv6 IID either by accepting an UE proposed value or by generating a random number.

Query

Range: "" (Null) or 19 characters of standard IPv6 address formatted as: AAAA.BBBB.CCCC.DDDD, where A, B, C, and D are all hex numbers between 0 and F.

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess:IP6:IID?"

Function

Queries the Current DUT IPv4 Address 2.

This setting returns the current negotiated DUT IPv4 address used by the second primary PDP context.

Query

Range: "" (Null) or 15 characters of standard IPv4 address formatted as: A.B.C.D, where A, B, C, and D are between 0 and 255

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess2:IP4?"

Function

Queries the Current DUT IPv6 IID 2 . This is the IID part of the negotiated DUT IPv6 address used by the second primary PDP context. The DUT IPv6 address is formed by combining the DUT IPv6 IID with the link-local prefix or the IPv6 Prefix. The testset assigns DUT IPv6 IID either by accepting an UE proposed value or by generating a random number.

Query

Range: "" (Null) or 19 characters of standard IPv6 address formatted as: AAAA.BBBB.CCCC.DDDD, where A, B, C, and D are all hex numbers between 0 and F.

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess2:IP6:IID?"

Function

Queries the Current Activated PDP Contexts Number .

This setting return the status of PDP contexts.

Query

Range: 0|1|2

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:PDPContext:ACTivated:COUNt?"

Function

Queries the orthogonal channel noise source (OCNS) level for the selected system type. See Downlink Code Channel Information .

The OCNS level is set using the CALL:OCNSource commands.

The optional [:SELected] keyword in this command specifies that the OCNS channel level being queried applies to the current system type.

Query

Range: 0 to -20 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Test Application Revision A.06 changed *RST Setting to 9.91 E+37.

Lab Application Revision C.01 changed *RST Setting to 9.91 E+37.

Programming Example

 
OUTPUT 714;"CALL:STATus:OCNSource?"

Function

Queries the current on/off state of the orthogonal channel noise simulator channel (OCNS). See Downlink Code Channel Information .

The OCNS channel on/off state is set using the CALL:OCNSource commands.

The optional [:SELected] keyword in this command specifies that the OCNS channel state being queried applies to the current system type.

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:OCNSource:STATe?"

Function

Queries the cell 2 orthogonal channel noise source (OCNS) level for the selected system type. See Downlink Code Channel Information .

The OCNS level is set using the CALL:CELL2:OCNSource commands.

The optional [:SELected] keyword in this command specifies that the OCNS channel level being queried applies to the current system type.

(See Cell 2 Overview ).

Query

Range: 0 to -20 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:OCNSource:CELL2?"

Function

Queries the current cell 2 on/off state of the orthogonal channel noise simulator channel (OCNS). See Downlink Code Channel Information .

The OCNS channel on/off state is set using the CALL:CELL2:OCNSource commands.

The optional [:SELected] keyword in this command specifies that the OCNS channel state being queried applies to the current system type.

(See Cell 2 Overview ).

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:OCNSource:CELL2:STATe?"

Function

Queries the current downlink page indicator channel's power. See Downlink Code Channel Information .

Query

Range: -20.00 to 0 dB, 9.91 E+37

Resolution: 0.01 dB

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Test Application Revision A.06 changed *RST Setting to -8.3 dB.

Lab Application Revision C.01 changed *RST Setting to -8.3 dB.

Programming Example

 
OUTPUT 714;"CALL:STATus:PICHannel?" 

Function

Queries the current state of the downlink page indicator channel. See Downlink Code Channel Information .

Query

Range: 1|0

*RST Setting

Requirements

Test or Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:PICHannel:STATe?"

Function

Queries the current power gain for the control data of the message portion of the uplink physical random access channel (PRACH) see PRACH Bc/Bd Control .

Query

Range: 2 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.03 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:PRAChannel:CURCbeta?"

Function

Queries the current power gain for the message data of the message portion of the uplink physical random access channel (PRACH) see PRACH Bc/Bd Control .

Query

Range: 0 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.03 and above

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:PRAChannel:CURDbeta?"

Function

Queries the Count of Reported CQI Limitations. This result counts how many times the Maximum Allowed CQI Value is used instead of using reported CQI to avoid code collision.

Query

Range: 0 to 1,500,000, 9.91 E+37

Resolution: 1

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:CQI:LIMitation:COUNt?"

Function

Queries how many times PCI value 0/1/2/3 is reported by the UE when MIMO operation is active.

This result is updated once per second.

Query

Range: 0 to 1,500,000, 9.91 E+37 (NaN)

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:PDSTream:CQI:LIMitation:COUNt?"

Function

Queries the Count of Reported CQI Limitations(Primary Data Stream) .

Query

Range: 0 to 1,500,000, 9.91 E+37

Resolution: 1

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:PDSTream:CQI:LIMitation:COUNt?"

Function

Queries how many times the Serving Cell Maximum Allowed CQI Value is used instead of using reported CQI to avoid code collision on the DC-HSDPA serving cell.

The result is only available in the LA.

Query

Range: 0 to 1,500,000, 9.91 E+37

*RST Setting

Requirements

Test Application Revision: A.19.00 and above, with the required feature license.
Lab Application Revision: H.01.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:SCELl:CQI:LIMitation:COUNt?"

Function

Queries the Count of Reported CQI Limitations(Secondary Data Stream) .

Query

Range: 0 to 1,500,000, 9.91 E+37

Resolution: 1

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:SDSTream:CQI:LIMitation:COUNt?"

Function

Queries the Count of Reported CQI Limitations. This result counts how many times the Maximum Allowed CQI Value is used instead of using reported CQI to avoid code collision on the DC-HSDPA secondary serving cell.

Query

Range: 0 to 1,500,000, 9.91 E+37

*RST Setting

Requirements

Test Application Revision: A.19.00 and above, with the required feature license.
Lab Application Revision: H.01.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:SSCell:CQI:LIMitation:COUNt?"

Function

Queries how many times one/two transport blocks is/are preferred by the UE when Current MIMO Configuration State is Active .

This result is updated once per second.

Query

Range: 0 to 150,000, 9.91 E+37 (NaN)

*RST Setting

Requirements

Lab Application Revision: I.00.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:TBLock:PREFerred:COUNt?"

Function

Queries the UTRA FDD Dual Carrier Total RF Power.

Query

Range:

-162dBm/(3.84+3.84)MHz to +40dBm/(3.84+3.84)MHz, No Results Available

(-112dBm/(3.84+3.84)MHz to -13dBm/(3.84+3.84)MHz actual hardware range with amplitude offset = 0)

Resolution: 0.01 dBm/(3.84+3.84)MHz

Note: The actual power range is defined by adding the value of the associated Amplitude Offset to the range in the table. E.g. if Amplitude Offset is -3.5 dB, then the power range will be -115.5dBm/(3.84+3.84)MHz to -13.5dBm/(3.84+3.84)MHz.

*RST Setting

Requirements

Test Application Revision: A.19.00 and above, with the required feature license.
Lab Application Revision: H.01.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:DCARrier:TOTal:POWer?"

Function

Queries UTRA FDD Dual Carrier Total RF Power State.

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision: A.19.00 and above, with the required feature license.
Lab Application Revision: H.01.00 and above.

Programming Example

 
OUTPUT 714;"CALL:STATus:DCARrier:TOTal:STATe?"
! Query the UTRA FDD Dual Carrier Total RF Power State.

Function

Queries the Current Downlink ROHC Large CIDs.

This result is inferred from the "Current Downlink ROHC Max CID". If the "Current Downlink ROHC Max CID" is greater than 15, then this result is "True", otherwise this result is "False".

Query

Range: 1|0

*RST Setting

0

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:ROHC:DOWNlink:CID:LARGe?"

Function

Queries the Current Downlink ROHC Max CID.

Query

Range: 1 to 16383

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:ROHC:DOWNlink:CID:MAXimum?"

Function

Queries the Current Downlink Reverse Decompression Depth.

Query

Range: 0 to 65535

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:ROHC:DOWNlink:RDDepth?"

Function

Queries the Current Uplink ROHC Large CIDs.

This result is inferred from the "Current Uplink ROHC Max CID". If the "Current Uplink ROHC Max CID" is greater than 15, then this result is "True", otherwise this result is "False".

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:ROHC:UPLink:CID:LARGe?"

Function

Queries the Current Uplink ROHC Max CID.

Query

Range: 1 to 16383

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:REPorted:CQI:LIMitation:COUNt?"

Function

Queries RRC State .

Query

Range: DCH|FACH|IDLE

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:RRC:STATe?"

Function

Queries the Current Service Type .

The current service type will be set to NONE when an event occurs that causes the service to be stopped. These events include:

• End Call
• A call processing error that results in a dropped call
• UE initiated end of service
• Full or Partial Preset

Query

Range:

• AMR: AMR Voice
• AHSP: AMR Voice + PS Data - HSPA (only applicable to the lab application)
• APSD: AMR +PS Data (only applicable to the lab application)
• CSDA: CS Data - Async (only applicable to the lab application )
• CSDV: CS Data - Video Call (only applicable to the lab application and to a test application with the required feature license )
• GPRS: UMTS/GPRS Packet Data (only applicable to the lab application )
• PHSP: UMTS/GPRS Packet Data - HSPA (only applicable to the lab application )
• PSDH: UMTS/GPRS Packet Data - HSDPA (only applicable to the lab application )
• RBT: RB Test Mode
• RBTH: RB Test Mode - HSDPA (only applicable to the lab application and to a test application with the required feature license )
• RHSP: RB Test Mode - HSPA (only applicable to the test application with the required feature license )
• MMC: Mobile Management connection (only applicable to the lab application )
• NONE

*RST Setting

Requirements

Test Application Revision: A.01 and above

Test Application Revision A.04 added AMR

Test Application Revision A.06 with the required feature license, added CSDV

Test Application Revision A.08.20 added RBTH

Test Application Revision A.12 with the required feature license and Lab Application Revision E.00.16, added RHSP

Lab Application Revision: A.01 and above

Lab Application Revision A.02 added AMR

Lab Application Revision C.01 added CSDV

Lab Application Revision C.03 added RBTH

Lab Application Revision D.00 added PSDH

Lab Application Revision E.00.16 added APSD

Lab Application Revision U.00.13 added PHSP

Lab Application Revision U.00.31 added AHSP

Lab Application Revision F.00 and above added MMC

Programming Example

 
OUTPUT 714;"CALL:STATus:SERVice:TYPe?"
! Returns the current service type.

Function

Queries PCR Info, UL: Channel and Frequency .

Query

Range: see CALL:SETup[:PCReconfig]:CHANnel<[:SELected]|:FDD>:UPLink:CHANnel

*RST Setting

Requirements

Test Application Revision: A.06 and above

Lab Application Revision: C.01 and above

Test Application Revision A.09 and Lab Application Revisions C.04 and D.00, added [:CHANnel]

All other changes match the CALL:SETup[:PCReconfig]:CHANnel<[:SELected]|:FDD>:UPLink:CHANnel command.

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:CHANnel:UPLink?"

Function

Queries the PCR Info, DL/UL Frequency Separation .

Query

Range: MHZ30|MHZ31|MHZ41|MHZ45|MHZ48|MHZ80|MHZ95|MHZ120|MHZ190|MHZ400|NSTD

*RST Setting

Requirements

Test Application Revision: A.09 and above

Test Application Revision A.10.01, added MHZ120

Test Application Revision A.11, added [:PCReconfig]

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Lab Application Revision D.01.01, added MHZ120

Lab Application Revision D.02, added [:PCReconfig]

Lab Application Revision E.00.34, added MHZ48

Test Application Revision A.14 and Lab Application Revision F.00, added MHZ30 and MHZ31

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added MHZ41

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:CHANnel:UPLink:SEParation?"

Function

Queries the PCR Info, Frequency Band .

Query

Range: BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8|BAND9|BAND10|
BAND11|BAND12|BAND13|BAND14|BAND19|BAND20|BAND21

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revisions: C.04 and D.00 and above

Test Application Revision A.10.01 and Lab Application Revision D.01.01, added BAND7

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, added BAND10

Test Application Revision A.11 and Lab Application Revision D.02, added [:PCReconfig]

Test Application Revision A.13 and Lab Application Revision E.00.34, added BAND11

Test Application Revision A.14 and Lab Application Revision F.00, added BAND12, BAND13, and BAND14

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added BAND19, BAND20 and BAND21.

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:FBINdicator?"

Function

Queries RBR Info, UL: Channel and Frequency .

Query

Range: see CALL:SETup:RBReconfig:CHANnel:UPLink:CHANnel

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Lab Application Revision: E.00.34 and above, added 3487 - 3587.

Test Application Revision A.14 and Lab Application Revision F.00 and above, added 3612 - 3678, 3702, 3707, 3732, 3737, 3762, 3767, 3792 - 3818, 3842, 3867, 3892 - 3918, 3942, 3967

Test Application Revision: A.18.00 and Lab Application Revision H.00.00 and above, added 312 to 363, 387, 412, 437, 4287 to 4413 and 462 to 512

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:RBReconfig:CHANnel:UPLink?"

Function

Queries RBR Info, DL/UL Frequency Separation .

Query

Range: MHZ30|MHZ31|MHZ41|MHZ45|MHZ48|MHZ80|MHZ95|MHZ120|MHZ190|MHZ400|NSTD

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Lab Application Revision E.00.34, added MHZ48

Test Application Revision A.14 and Lab Application Revision F.00, added MHZ30 and MHZ31

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added MHZ41

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:RBReconfig:CHANnel:UPLink:SEParation?"

Function

Query

Range: 1 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, range is 1 to 15 (vs. 2 to 15)

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:RBReconfig:DPCHannel:CBETa?" 

Function

Query

Range: 0 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:RBReconfig:DPCHannel:DBETa?" 

Function

Queries RBR Info, Frequency Band .

Query

Range: BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8|BAND9|BAND10|
BAND11|BAND12|BAND13|BAND14|BAND19|BAND20|BAND21

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Lab Application Revision: E.00.34 and above, added BAND11

Test Application Revision A.14 and Lab Application Revision F.00, added BAND12, BAND13, and BAND14

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added BAND19, BAND20 and BAND21.

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:RBReconfig:FBINdicator?"

Function

Queries TCR Info, UL: Channel and Frequency .

Query

Range: see CALL:SETup:TCReconfig:CHANnel:UPLink:CHANnel

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Lab Application Revision: E.00.34 and above, added 3487 - 3587.

Test Application Revision A.14 and Lab Application Revision F.00 and above, added 3612 - 3678, 3702, 3707, 3732, 3737, 3762, 3767, 3792 - 3818, 3842, 3867, 3892 - 3918, 3942, 3967

Test Application Revision: A.18.00 and Lab Application Revision H.00.00 and above, added 312 to 363, 387, 412, 437, 4287 to 4413 and 462 to 512

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:TCReconfig:CHANnel:UPLink?"

Function

Queries TCR Info, DL/UL Frequency Separation .

Query

Range: MHZ30|MHZ31|MHZ41|MHZ45|MHZ48|MHZ80|MHZ95|MHZ120|MHZ190|MHZ400|NSTD

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Lab Application Revision E.00.34, added MHZ48

Test Application Revision A.14 and Lab Application Revision F.00, added MHZ30 and MHZ31

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added MHZ41

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:TCReconfig:CHANnel:UPLink:SEParation?"

Function

Query

Range: 1 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, range is 1 to 15 (vs. 2 to 15)

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:TCReconfig:DPCHannel:CBETa?" 

Function

Query

Range: 0 to 15

Resolution: 1

*RST Setting

Requirements

Test Application Revision: A.09 and above

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:TCReconfig:DPCHannel:DBETa?" 

Function

Queries TCR Info, Frequency Band .

Query

Range: BAND1|BAND2|BAND3|BAND4|BAND5|BAND6|BAND7|BAND8|BAND9|BAND10|
BAND11|BAND12|BAND13|BAND14|BAND19|BAND20|BAND21

*RST Setting

Requirements

Test Application Revision A.11 and Lab Application Revision D.02 and above

Test Application Revision A.13 and Lab Application Revision E.00.34 and above, added BAND11

Test Application Revision A.14 and Lab Application Revision F.00, added BAND12, BAND13, and BAND14

Test Application Revision A.18.00 and Lab Application Revision H.00.00 and above, added BAND19, BAND20 and BAND21.

Programming Example

 
OUTPUT 714;"CALL:STATus:SETup:TCReconfig:FBINdicator?"

Function

Queries Queued Relative Grants .

Query

Range: 0 to 1000

*RST Setting

Requirements

Test Application Revision A.12 and above, with the required feature license

Lab Application Revision E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SGRant:RELative:QUEued:COUNt?"

Function

Queries the most recent Intra Frequency Event identifier. Events can be:

• 1a
• 1b
• 1c
• 1d
• 1e
• 1f
• None

(See Event Reporting ).

Query

Range: 1A|1B|1C|1D|1E|1F|NONE

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SHANdoff:EVENt?" !Returns the most recent event.

Function

Query

Range: CELL1|CELL2|NONE

*RST Setting

Requirements

Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SHANdoff:EVENt:CELLid?" 

Function

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: B.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:SHANdoff:STATe?" 

Function

Queries the Current UTRA FDD Carrier 2 Cell Power.

Query

Range: -165dBm/3.84MHz to +37dBm/3.84MHz, 9.91 E+37 (NAN)

(-115dBm/3.84MHz to -13dBm/3.84MHz actual hardware range with amplitude offset=0)

Resolution:0.01dBm/3.84MHz

Note: The actual power range is defined by adding the value of the associated Amplitude Offset to the range above. E.g. if Amplitude Offset is -3.5dB, then the power range will be -118.5dBm/3.84MHz to -16.5dBm/3.84MHz.

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:SScell:Power?"
! Returns the Current UTRA FDD Carrier 2 Cell Power.

Function

Queries the Current UTRA FDD Carrier 2 Cell Power State.

Query

Range: 1|On|0|Off

*RST Setting

0 (Off)

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:SSCell:POWer:STATe?"
! Returns the Current UTRA FDD Carrier 2 Cell Power State.

Function

Queries the desired total power on the carrier 2, which is equivalent to the Secondary Serving Cell Power .

Query

Range: -165dBm/3.84MHz to +37dBm/3.84MHz , 9.91 E+37 (NAN)

(-115dBm/3.84MHz to -13dBm/3.84MHz actual hardware range with amplitude offset=0)

Resolution:0.01dBm/3.84MHz

Note: The actual power range is defined by adding the value of the associated Amplitude Offset to the range above. E.g. if Amplitude Offset is -3.5 dB, then the power range will be -118.5dBm/3.84MHz to -16.5dBm/3.84MHz.

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:SSCell:TOTal:POWer?"
! Returns the UTRA FDD Carrier 2 Total RF Power.

Function

Queries the desired power state of the carrier 2, which is equivalent to the "Secondary Serving Cell Power State".

Query

Range: 1|On|0|Off

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:SSCell:TOTal:POWer:STATe?"
! Returns the UTRA FDD Carrier 2 Total RF Power State.

Function

Queries the UL frequency that the test set is currently using.

Query

Range:

• 1920 to 1980 MHz
• 1850 to 1910 MHz
• 1710 to 1785 MHz
• 824 to 862 MHz
• 2500 to 2570 MHz
• 880 to 915 MHz
• 1710 to 1784.9 MHz
• 1427.9 to 1447.9 MHz
• 698 to 716 MHz
• 777 to 787 MHz
• 788 to 798 MHz
• 1447.9 to 1462.9 MHz

Increment: 0.1 MHz

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:SSCell:UPLink:FREQuency?" 
!Returns the UTRA FDD Current Carrier 2 UL Frequency.