:LTESt Acquisition Commands
Instrument:
N1010A
DCA-X
DCA-M
Meas. mode:
Scope
Eye
Jitter
TDR
Flex Apps:
FlexDCA
FlexRT
Creating an Acquisition Limit Test
The following example shows how to create an acquisition limit test that runs until 100 waveforms have been acquired.
:ACQuire:SINGle // Stop waveform acquisition. :LTESt:ACQuire:CTYPe WAVeforms // Create test based on acquisition to waveforms. :LTESt:ACQuire:CTYPe:WAVeforms 100 // Stop test after 100 waveforms acquired. :LTESt:ACQuire:SWAVeform:CHAN1B:STATe MEMory // Save channel 1B to waveform memory. :LTESt:ACQuire:SWAVeform:CHAN1B:WMEMory WMEMory2 // Select waveform memory 2. :LTESt:ACQuire:SIMage:STATe ON // Save screen image. :LTESt:ACQuire:SIMage:INVert ON // Invert colors on screen image. :LTESt:ACQuire:SIMage:WINDow TIME1 // Capture only waveform instead of entire display. :LTESt:ACQuire:SIMage:FNAMe "C:\Users\me\Documents\Keysight\FlexDCA\Screen Images\my test.jpg" // Create this image file. :LTESt:ACQuire:STATe ON // Turn limit test on. :ACQuire:RUN // Start waveform acquisition. *OPC? // Wait for test completion.
Test Setup
- :LTESt:ACQuire:CTYPe
- :LTESt:ACQuire:CTYPe:PATTerns
- :LTESt:ACQuire:CTYPe:SAMPles
- :LTESt:ACQuire:CTYPe:WAVeforms
- :LTESt:ACQuire:STATe
Report: Screen Image File
- :LTESt:ACQuire:SIMage:FNAMe
- :LTESt:ACQuire:SIMage:FNAMe:AUPDate
- :LTESt:ACQuire:SIMage:FNAMe:USTandard
- :LTESt:ACQuire:SIMage:FTYPe?
- :LTESt:ACQuire:SIMage:IMETadata
- :LTESt:ACQuire:SIMage:INVert
- :LTESt:ACQuire:SIMage:MONochrome
- :LTESt:ACQuire:SIMage:SINClude
- :LTESt:ACQuire:SIMage:STATe
- :LTESt:ACQuire:SIMage:WINDow
Report: Waveform File
- :LTESt:ACQuire:SWAVeform:CHANnel:FNAMe
- :LTESt:ACQuire:SWAVeform:CHANnel:FTYPe
- :LTESt:ACQuire:SWAVeform:CHANnel:STATe
- :LTESt:ACQuire:SWAVeform:CHANnel:WMEMory
- :LTESt:ACQuire:SWAVeform:CMODe:FNAMe (not available in FlexRT)
- :LTESt:ACQuire:SWAVeform:CMODe:FTYPe (not available in FlexRT)
- :LTESt:ACQuire:SWAVeform:CMODe:STATe (not available in FlexRT)
- :LTESt:ACQuire:SWAVeform:CMODe:WMEMory (not available in FlexRT)
- :LTESt:ACQuire:SWAVeform:DIFF:FNAMe
- :LTESt:ACQuire:SWAVeform:DIFF:FTYPe
- :LTESt:ACQuire:SWAVeform:DIFF:STATe
- :LTESt:ACQuire:SWAVeform:DIFF:WMEMory
- :LTESt:ACQuire:SWAVeform:FUNCtion:FNAMe
- :LTESt:ACQuire:SWAVeform:FUNCtion:STATe
- :LTESt:ACQuire:SWAVeform:FUNCtion:WMEMory
- :LTESt:ACQuire:SWAVeform:RESet