| Main Tab Commands | 
      
        | Softkey | Sub-item | SCPI | COM | 
      
        | MOD/MODX Setup... | Sweep Tab | 
      
        | Sweep Type | SENSe:DISTortion:SWEep:TYPE | None | 
      
        | Carrier Frequency | SENSe:DISTortion:SWEep:CARRier:FREQuency | None | 
      
        | SA Center | SENSe:FREQuency:CENTer | chan.CenterFrequency | 
      
        | SA Start | SENSe:FREQuency:STARt | chan.StartFrequency | 
      
        | SA Span | SENSe:FREQuency:SPAN SENSe:FREQuency:SPAN:FULL | chan.FrequencySpan FrequencySpanFull | 
      
        | SA Stop | SENSe:FREQuency:STOP | chan.StopFrequency | 
      
        | Noise BW | SENSe:SA:BANDwidth:NOISe SENSe:SA:BANDwidth:NOISe:AUTO | None None | 
      
        | Set Power At | SENSe:DISTortion:SWEep:POWer:CARRier:LEVel SENSe:DISTortion:SWEep:POWer:CARRier:LEVel:PORT | None None | 
      
        | S-Param Power At DUT In/Out | SENSe:DISTortion:SWEep:POWer:SPARam:LEVel SENSe:DISTortion:SWEep:POWer:CARRier:LEVel:PORT | None None | 
      
        | Power Sweep... | 
      
        | Power Sweep Type | ENSe:DISTortion:SWEep:POWer:CARRier:LEVel:TYPE | None | 
      
        | Ramp Power Sweep Type |  |  | 
      
        | Start Power At | SENSe:DISTortion:SWEep:POWer:CARRier:RAMP:LEVel:STARt | None | 
      
        | Stop Power At | SENSe:DISTortion:SWEep:POWer:CARRier:RAMP:LEVel:STOP | None | 
      
        | Number of Powers | SENSe:DISTortion:SWEep:POWer:CARRier:RAMP:POINts | None | 
      
        | Noise BW | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:NBW | None | 
      
        | Auto-Increase NBW at High Powers | SENSe:DISTortion:SWEep:POWer:CARRier:RAMP:NBW:AUTO | None | 
      
        | List Power Sweep Type |  |  | 
      
        | Power | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:LEVel | None | 
      
        | Src Atten     Fixed Atten     Custom | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:SOURce:ATTenuation SENSe:DISTortion:SWEep:POWer:CARRier:LIST:SOURce:ATTenuation:MODE SENSe:DISTortion:SWEep:POWer:CARRier:LIST:SOURce:ATTenuation:MODE | None None None | 
      
        | Rcvr Atten     Fixed Atten     Custom | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:RECeiver:ATTenuation SENSe:DISTortion:SWEep:POWer:CARRier:LIST:RECeiver:ATTenuation:MODE SENSe:DISTortion:SWEep:POWer:CARRier:LIST:RECeiver:ATTenuation:MODE | None None None | 
      
        | Noise BW     Fixed NBW     Custom     Auto-Increase | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:NBW SENSe:DISTortion:SWEep:POWer:CARRier:LIST:NBW:MODE SENSe:DISTortion:SWEep:POWer:CARRier:LIST:NBW:MODE SENSe:DISTortion:SWEep:POWer:CARRier:LIST:NBW:MODE | None None None None | 
      
        | Add Row | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:ADD | None | 
      
        | Delete Row | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:DELete | None | 
      
        | Load... | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:LOAD | None | 
      
        | Save... | SENSe:DISTortion:SWEep:POWer:CARRier:LIST:SAVE | None | 
      
        | DC Sources... | 
      
        | Enable DC Outputs | SOURce:DC:ENABle | EnableAllOutput | 
      
        | State ON|OFF|PerPort | SOURce:DC:STATe | State | 
      
        | Start DC | SOURce:DC:Start | Start | 
      
        | Stop DC | SOURce:DC:Stop | Stop | 
      
        | Limits... |  |  | 
      
        | State | SOURce:DC:STATe | State | 
      
        | Min | SOURce:DC:LIMit:MINimum | LimitMin | 
      
        | Max | SOURce:DC:LIMit:MAXimum | LimitMax | 
      
        | Sweep Details... | 
      
        | Force RF Power OFF at the End of Sweep - System Preference | SENSe:DISTortion:SWEep:RETRace:POWer | None | 
      
      
        |  | Delay Before Start of Sweep | SENSe:SWEep:DWELl:SDELay | SweepDelay | 
      
        | Delay Before Distortion Measurement | SENSe:DISTortion:SWEep:DWELl | None | 
      
      
      
        |  | Enable S-Param Sweep | SENSe:DISTortion:SWEep:SPARam[:STATe] | None | 
      
        | S-Param Source | SENSe:DISTortion:SWEep:SPARam:TYPE | None | 
      
        | S-Param Freq Step | SENSe:DISTortion:SWEep:SPARam:STEP | None | 
      
        | S-Param IFBW | SENSe:DISTortion:SWEep:SPARam:BWIDth | None | 
      
        | Re-use Previous S-Parameter Measurements | SENSe:DISTortion:SWEep:SPARam:REUSe | None | 
      
        | RF Path Tab | 
      
      
        |  | VNA Source Attenuator     Include | SOURce:POWer:ATTenuation SENSe:DISTortion:PATH:SOURce:ATTenuation:INCLude | chan.Attenuator None | 
      
        | Nominal Source Amp | SENSe:DISTortion:PATH:SOURce:NOMinal:AMPLifier | None | 
      
        | DUT Input | SENSe:DISTortion:PATH:DUT:INPut | None | 
      
        | Nominal DUT Gain | SENSe:DISTortion:PATH:DUT:NOMinal:GAIN | None | 
      
        | DUT Output | SENSe:DISTortion:PATH:DUT:OUTPut | None | 
      
        | Nominal DUT NF | SENSe:DISTortion:PATH:DUT:NOMinal:NF | None | 
      
        | Nominal DUT NF Include | SENSe:DISTortion:PATH:DUT:NOMinal:NF:INCLude | None | 
      
        | Receiver Attenuator | SOURce:POWer:ATTenuation:RECeiver:TEST | None | 
      
      
        |  | RF Path Config... | SENSe:PATH:CONFig:ELEMent[:STATe] | Element | 
      
        | Offsets and Limits... |  |  | 
      
        | Mixer Tab | 
      
        | Converter Stages | SENSe:MIXer:STAGe | LOStage | 
      
        | Enable Embedded LO | SENSe:MIXer:ELO:STATe | IsOn | 
      
        | Setup... | 
      
        | Enable Embedded LO | SENSe:MIXer:ELO:STATe | IsOn | 
      
        | Tuning Method | SENSe:MIXer:ELO:TUNing:MODE | TuningMode | 
      
        | Tune every | SENSe:MIXer:ELO:TUNing:INTerval | TuningSweepInterval | 
      
        | Broadband Search | SENSe:MIXer:ELO:TUNing:SPAN | BroadbandTuningSpan | 
      
        | Noise BW | SENSe:MIXer:ELO:TUNing:NBW | None | 
      
        | Max Iterations | SENSe:MIXer:ELO:TUNing:ITERations | MaxPreciseTuningIterations | 
      
        | Tolerance | SENSe:MIXer:ELO:TUNing:TOLerance | PreciseTuningTolerance | 
      
        | LO Frequency Delta | SENSe:MIXer:ELO:LO:DELTa | LOFrequencyDelta | 
      
        | Default | SENSe:MIXer:ELO:RESet | ResetLOFrequency ResetTuningParameters | 
      
        | Input | SENSe:DISTortion:SWEep:CARRier:FREQuency | None | 
      
        | Output | SENSe:MIXer:OUTPut:FREQuency:SIDE | OutputSideband | 
      
        | Fractional Multiplier - Numerator | SENSe:MIXer:LO:FREQuency:NUMerator | LONumerator | 
      
        | Fractional Multiplier - Denominator | SENSe:MIXer:LO:FREQuency:DENominator | LODenominator | 
      
        | LO/LO1/LO2 | SENSe:MIXer:LO:FREQuency:FIXed | LOFixedFrequency | 
      
        | IF | SENSe:MIXer:IF:FREQuency:SIDE | IFSideband | 
      
        | Source Name | SENSe:MIXer:LO:NAME SENSe:ROLE:DEVice SENSe:ROLE:CATalog? | LOName RoleDevice DefinedRoles | 
      
        | Power | SENSe:MIXer:LO:POWer | LOPower | 
      
        | Leveling | SOURce:POWer:ALC[:MODE] | ALCLevelingMode | 
      
        | Attenuator | SOURce:POWer:ATTenuation | chan.Attenuator | 
      
        | Save... | SENSe:MIXer:SAVE | SaveFile | 
      
        | Load... | SENSe:MIXer:LOAD | LoadFile | 
      
        | Modulate Tab | 
      
        | Source | SENSe:DISTortion:MODulate:SOURce | None | 
      
        | Add Source... | SENSe:ROLE:DEVice | AssignSourceToRole | 
      
        | Load File... | SOURce:MODulation:FILE:LOAD | None | 
      
        | Create... |  |  | 
      
        | Edit... |  |  | 
      
        | Properties... | SOURce:MODulation:FILE:CORRection:CATalog? SOURce:MODulation:FILE:CORRection:DELete? | None None | 
      
        | Enable Modulation | SOURce:MODulation[:STATe] | IsEnhancedModulationControl | 
      
        | Source Correction | SOURce:CORRection[:SELect] | None | 
      
        | Enable LO Feedthru Monitor | SENSe:SA:COHerence:LO:FTHRu:MONitor[:STATe] | None | 
      
        | Enable Pulse | None | None | 
      
        | Source Cal... |  |  | 
      
        | Pulse Setup... |  |  | 
      
        | LO Monitor... | 
      
        | Enable LO Feedthru Monitor | SENSe:SA:COHerence:LO:FTHRu:MONitor[:STATe] | None | 
      
        | Threshold Type | SENSe:SA:COHerence:LO:FTHRu:MONitor:TYPE | None | 
      
        | Threshold Level | SENSe:SA:COHerence:LO:FTHRu:MONitor:TOLerance | None | 
      
        | Measure LO at | SENSe:SA:COHerance:LO:FTHRu:MONitor:RECeiver | None | 
      
        | Create/Edit Mod File... | 
      
        | Modulation Type | SOURce:MODulation:FILE:TYPE | None | 
      
        | Source Name | SENSe:DISTortion:MODulate:SOURce | None | 
      
        | Sample Rate | SOURce:MODulation:FILE:SIGNal:SRATe SOURce:MODulation:FILE:SIGNal:SRATe:AUTO SOURce:MODulation:FILE:SIGNal:SRATe:CALCulated? SOURce:MODulation:FILE:SIGNal:COMPact:OFILe:SRATe | None None None None | 
      
        | Filename | SOURce:MODulation:FILE:SIGNal:COMPact:OFILe | None | 
      
        | Signal Span | SOURce:MODulation:FILE:SIGNal:SPAN SOURce:MODulation:FILE:SIGNal:SPAN:CALCulated? SOURce:MODulation:FILE:SIGNal:SPAN:PRIority | None None None | 
      
        | Tone Spacing | SOURce:MODulation:FILE:SIGNal:TONE:SPACing SOURce:MODulation:FILE:SIGNal:TONE:SPACing:CALCulated? SOURce:MODulation:FILE:SIGNal:TONE:SPACing:PRIority | None None None | 
      
        | Number of Tones | SOURce:MODulation:FILE:SIGNal:TONE:NUMBer SOURce:MODulation:FILE:SIGNal:TONE:NUMBer:CALCulated? SOURce:MODulation:FILE:SIGNal:TONE:NUMBer:PRIority SOURce:MODulation:FILE:SIGNal:TONE:NUMBer:ROUNd | None None None None | 
      
        | Peak-to-Avg | SOURce:MODulation:FILE:SIGNal:COMPact:PAVG? SOURce:MODulation:FILE:SIGNal:COMPact:PAVG:CALCulated? SOURce:MODulation:FILE:SIGNal:COMPact:PAVG:PRIority SOURce:MODulation:FILE:SIGNal:PAVG:CALCulated? | None None None None | 
      
        | Carrier Offset | SOURce:MODulation:FILE:SIGNal:CARRier:OFFSet | None | 
      
        | Nmbr of Subcarriers | SOURce:MODulation:FILE:SIGNal:COMPact:SUBCarrier:NUMBer | None | 
      
        | Sub Span | SOURce:MODulation:FILE:SIGNal:COMPact:SUBCarrier:SPAN | None | 
      
        | Sub Offset | SOURce:MODulation:FILE:SIGNal:COMPact:SUBCarrier:OFFSet | None | 
      
        | Phase Type | SOURce:MODulation:FILE:SIGNal:PHASe:TYPE | None | 
      
        | Fixed | SOURce:MODulation:FILE:SIGNal:PHASe:FIXed | None | 
      
        | Random Phase Seed | SOURce:MODulation:FILE:SIGNal:PHASe:RANDom:SEED | None | 
      
        | Nmbr of Notches | SOURce:MODulation:FILE:SIGNal:NPR:NOTCh:NUMBer | None | 
      
        | Notch Location | SOURce:MODulation:FILE:SIGNal:NPR:NOTCh:LOCation | None | 
      
        | Notch1 Span | SOURce:MODulation:FILE:SIGNal:NPR:NOTCh:SPAN | None | 
      
        | Notch1 Offset | SOURce:MODulation:FILE:SIGNal:NPR:NOTCh:OFFSet | None | 
      
        | Signal Start Time | SOURce:MODulation:FILE:SIGNal:COMPact:TIME:STARt SOURce:MODulation:FILE:SIGNal:COMPact:TIME:STARt:CALCulated? SOURce:MODulation:FILE:SIGNal:COMPact:TIME:STARt:PRIority | None None None | 
      
        | Number of Files | SOURce:MODulation:FILE:SIGNal:COMPact:FILE:NUMBer SOURce:MODulation:FILE:SIGNal:COMPact:FILE:SELect | None None | 
      
        | DAC Scaling | SOURce:MODulation:FILE:SIGNal:DAC:SCALing | None | 
      
        | Enable Optimizer | SOURce:MODulation:FILE:SIGNal:OPTimize:ENABle | None | 
      
        | Setup... (Optimizer Setup) | 
      
        | Reject up to Harmonic Number | SOURce:MODulation:FILE:SIGNal:OPTimize:HREJect | None | 
      
        | Reject Nyquist Frequencies | SOURce:MODulation:FILE:SIGNal:OPTimize:NYQReject:ENABle | None | 
      
        | Preserve Burst Characteristics of Original Signal | SOURce:MODulation:FILE:SIGNal:OPTimize:BURSt:PREServe:ENABle | None | 
      
        | Enable Brick-wall Filter For Spectral Leakage | SOURce:MODulation:FILE:SIGNal:OPTimize:FILTer:ENABle | None | 
      
        | Enable Spectral Leakage Tapering Window With [n] Taps | SOURce:MODulation:FILE:SIGNal:OPTimize:FILTer:TAPS | None | 
      
      
        |  | Tolerance Type | SOURce:MODulation:FILE:SIGNal:OPTimize:TYPE | None | 
      
        | Frequency Tolerance | SOURce:MODulation:FILE:SIGNal:OPTimize:FREQuency:TOLerance | None | 
      
        | Min Waveform Period | SOURce:MODulation:FILE:SIGNal:OPTimize:MIN:WAVeform:PERiod | None | 
      
        | Min Number of Tones | SOURce:MODulation:FILE:SIGNal:OPTimize:MIN:TONE:NUMBer | None | 
      
        | Max Tone Spacing | SOURce:MODulation:FILE:SIGNal:OPTimize:MAX:TONE:SPacing | None | 
      
        | Display | None | None | 
      
        | Number of Samples | None | None | 
      
        | Calculated Sample Rate | SOURce:MODulation:FILE:SIGNal:SRATe:CALCulated? | None | 
      
        | Measurement Time | None | None | 
      
        | Filename | SOURce:MODulation:FILE:LOAD SOURce:MODulation:FILE:SAVE | None None | 
      
        | Calculate | None | None | 
      
        | Save... | SOURce:MODulation:FILE:SAVE | None | 
      
        | Recall... | SOURce:MODulation:FILE:LOAD | None | 
      
        | Edit... (Edit Multitone) | 
      
        | Tone | SOURce:MODulation:FILE:TONE:COUNt? | None | 
      
        | Frequency | SOURce:MODulation:FILE:TONE:FREQuency? | None | 
      
        | Power (dBm) | SOURce:MODulation:FILE:TONE:POWer | None | 
      
        | Phase (deg) | SOURce:MODulation:FILE:TONE:PHASe | None | 
      
        | State | SOURce:MODulation:FILE:TONE[:STATe] | None | 
      
        | Set All Tones | SOURce:MODulation:FILE:TONE:ALL[:STATe] | None | 
      
        | Display | None | None | 
      
        | Go To Row | None | None | 
      
        | Save... | SOURce:MODulation:FILE:TONE:SAVE | None | 
      
        | Load... | SOURce:MODulation:FILE:TONE:LOAD | None | 
      
        | Defaults | SOURce:MODulation:FILE:INITialize | None | 
      
        | Properties... | None | None | 
      
        | Create Digital Modulation | 
      
        | Number of Carriers | SOURce:MODulation:FILE:SIGNal:DIGital:CARRier:NUMBer | None | 
      
        | Calculated Carrier Spacing | SOURce:MODulation:FILE:SIGNal:DIGital:CARRier:SPACing:CALCulated | None | 
      
        | Carrier Spacing | SOURce:MODulation:FILE:SIGNal:DIGital:CARRier:SPACing |  | 
      
        | Constellation File | SOURce:MODulation:FILE:SIGNal:DIGital:CFILe |  | 
      
        | Alpha/BT | SOURce:MODulation:FILE:SIGNal:DIGital:FILTer:ALPHa |  | 
      
        | Filter Type | SOURce:MODulation:FILE:SIGNal:DIGital:FILTer:TYPE |  | 
      
        | Modulation Format | SOURce:MODulation:FILE:SIGNal:DIGital:FORMat |  | 
      
        | Quadrature Error | SOURce:MODulation:FILE:SIGNal:DIGital:QUADrature:ERRor |  | 
      
        | Random Seed | SOURce:MODulation:FILE:SIGNal:DIGital:RANDom:SEED |  | 
      
        | Calculated Number of Symbols | SOURce:MODulation:FILE:SIGNal:DIGital:SYMBol:NUMBer:CALCulated |  | 
      
        | Number of Symbols | SOURce:MODulation:FILE:SIGNal:DIGital:SYMBol:NUMBer |  | 
      
        | Calculated Symbol Rate | SOURce:MODulation:FILE:SIGNal:DIGital:SYMBol:RATE:CALCulated |  | 
      
        | Symbol Rate | SOURce:MODulation:FILE:SIGNal:DIGital:SYMBol:RATE |  | 
      
        |  | Create DPD... | 
      
        | DPD Select Procedure Dialog | 
      
        | Procedure | SOURce:DPD:PROCedure | None | 
      
        | Select Ideal Waveform | SOURce:DPD:FILE:LOAD:IDEal | None | 
      
        | Select DPD Model | SOURce:DPD:FILE:LOAD:MODel | None | 
      
        | Save DPD As | SOURce:DPD:FILE:SAVE | None | 
      
      
        |  | DPD Model | SOURce:DPD:MODel:TYPE | None | 
      
        | Create Model Using | SOURce:DPD:MODel:USE:DIRect | None | 
      
        | Cal Setup Dialog |  |  | 
      
        | DUT-EVM |  |  | 
      
        | Span | SOURce:DPD:CORRection:COLLection:DUT:EVM:SPAN | None | 
      
        | Max Iterations | SOURce:DPD:CORRection:COLLection:DUT:EVM:ITERations | None | 
      
        | Desired Tolerance | SOURce:DPD:CORRection:COLLection:DUT:EVM:TOLerance | None | 
      
        | DUT-ACP |  |  | 
      
        | Enable/Disable | SOURce:DPD:CORRection:COLLection:DUT:ACP:ENABle | None | 
      
        | Span | SOURce:DPD:CORRection:COLLection:DUT:ACP:SPAN | None | 
      
        | Guard Band | SOURce:DPD:CORRection:COLLection:DUT:ACP:GBANd | None | 
      
        | Max Iterations | SOURce:DPD:CORRection:COLLection:DUT:ACP:ITERations | None | 
      
        | Desired Tolerance | SOURce:DPD:CORRection:COLLection:DUT:ACP:TOLerance | None | 
      
        | Src- Power At DUT Out |  |  | 
      
        | Enable/Disable | SOURce:DPD:CORRection:COLLection:POWer:ENABle | None | 
      
        | Span | SOURce:DPD:CORRection:COLLection:POWer:SPAN | None | 
      
        | Max Iterations | SOURce:DPD:CORRection:COLLection:POWer:ITERations | None | 
      
        | Desired Tolerance | SOURce:DPD:CORRection:COLLection:POWer:TOLerance | None | 
      
        | Src-LO Feedthru |  |  | 
      
        | Enable/Disable | SOURce:DPD:CORRection:COLLection:LO:FTHRu:ENABle | None | 
      
        | Max Iterations | SOURce:DPD:CORRection:COLLection:LO:FTHRu:ITERations | None | 
      
        | Desired Tolerance | SOURce:DPD:CORRection:COLLection:LO:FTHRu:TOLerance | None | 
      
        | Src- |  |  | 
      
        | Enable/Disable | SOURce:DPD:CORRection:COLLection:DISTortion:ENABle | None | 
      
        | Type | SOURce:DPD:CORRection:COLLection:DISTortion:TYPE | None | 
      
        | Span | SOURce:DPD:CORRection:COLLection:DISTortion:SPAN | None | 
      
        | Max Iterations | SOURce:DPD:CORRection:COLLection:DISTortion:ITERations | None | 
      
        | Desired Tolerance | SOURce:DPD:CORRection:COLLection:DISTortion:TOLerance | None | 
      
        | Cal Detals Dialog |  | 
      
        | DAC Scaling | SOURce:DPD:DAC:SCALing | None | 
      
        | Maximum PAPR Expansion | SOURce:DPD:PAPR:EXPansion:MAXimum | None | 
      
        | Backoff For Linear Gain Measurement | SOURce:DPD:MEASure:LINGain:POWer:BACKoff | None | 
      
        | During Direct DPD, Measure DUT Linear Gain | SOURce:DPD:MEASure:LINGain:ENABle | None | 
      
        | Modulation Cal Dialog | 
      
        | Calibrate | SOURce:DPD:CORRection:COLLection:ACQuire | None | 
      
        | Status | SOURce:DPD:CORRection:COLLection:ACQuire:STATus? | None | 
      
        | Modeling Dialog | 
      
        | Polynomial Order | SOURce:DPD:MODel:MEMPoly:ORDer | None | 
      
        | Past Memory (-) | SOURce:DPD:MODel:MEMPoly:MEMory:PAST | None | 
      
        | Future Memory (+) | SOURce:DPD:MODel:MEMPoly:MEMory:FUTure | None | 
      
        | Crossterm Equations | SOURce:DPD:MODel:MEMPoly:CROSsterm | None | 
      
        | Memory Operators | SOURce:DPD:MODel:DYNGain:MEMory:OPERator:M[1-4]:ENABle | None | 
      
        | Number Power Segments | SOURce:DPD:MODel:DYNGain:POWer:SEGMent:COUNt | None | 
      
        | Memory Past Depth | SOURce:DPD:MODel:DYNGain:MEMory:PAST | None | 
      
        | Memory Future Depth | SOURce:DPD:MODel:DYNGain:MEMory:FUTure | None | 
      
        | Memory Stepsize | SOURce:DPD:MODel:DYNGain:MEMory:STEP | None | 
      
        | Create Model or Apply Model
 | SOURce:DPD:MODel:CREate SOURce:DPD:MODel:APPLy | None None | 
      
        | Cal Model | SOURce:DPD:MODel:CALibrate | None | 
      
        | Model Status | SOURce:DPD:MODel:STATus? | None | 
      
        | Model Details Dialog | 
      
        | Interpolation Type | SOURce:DPD:MODel:DYNGain:INTerpolate:TYPE | None | 
      
        | Min Points Per Power Segment | SOURce:DPD:MODel:DYNGain:POWer:SEGMent:POINt:COUNt:MINimum | None | 
      
        | Optimize DPD Model | SOURce:DPD:MODel:DYNGain:OPTimize:ENABle | None | 
      
        | Use Waveform Compacted By, Level | SOURce:DPD:MODel:DYNGain:OPTimize:COMPact:LEVel | None | 
      
        | Use Waveform Compacted By, Auto | SOURce:DPD:MODel:DYNGain:OPTimize:COMPact:AUTO | None | 
      
        | NMSE Optimization Goal, State | SOURce:DPD:MODel:DYNGain:OPTimize:NMSE:INCL | None | 
      
        | NMSE Optimization Goal, Value | SOURce:DPD:MODel:DYNGain:OPTimize:NMSE:GOAL | None | 
      
        | Optimize Memory Operators | SOURce:DPD:MODel:DYNGain:OPTimize:MEMory:OPERator:INCLude | None | 
      
        |  | Measure Tab | 
      
        | Measurement Type | SENSe:DISTortion:MEASure:BAND:TYPE | None | 
      
        | Autofill | SENSe:DISTortion:MEASure:BAND:AUTofill | None | 
      
        | Carrier | SENSe:DISTortion:SWEep:CARRier:FREQuency SENSe:DISTortion:MEASure:BAND:CARRier:IBW SENSe:DISTortion:MEASure:BAND:CARRier:OFFSet | None | 
      
        |  | ACPLo | SENSe:DISTortion:MEASure:BAND:ACP:LOWer:IBW SENSe:DISTortion:MEASure:BAND:ACP:LOWer:OFFSet | None None | 
      
        | ACPUp | SENSe:DISTortion:MEASure:BAND:ACP:LOWer:IBW SENSe:DISTortion:MEASure:BAND:ACP:LOWer:OFFSet | None None | 
      
        | Notch | SENSe:DISTortion:MEASure:BAND:NOTCh:IBW SENSe:DISTortion:MEASure:BAND:NOTCh:OFFSet | None None | 
      
        | Measurement Details | 
      
        | Distortion Measurement Correlation Aperture | SENSe:DISTortion:MEASure:CORRelation:APERture SENSe:DISTortion:MEASure:CORRelation:APERture:AUTO[:STATe] | None None | 
      
        | ADC Anti-alias Filter | SENSe:DISTortion:ADC:FILTer:TYPE | None | 
      
        |  | Modulation Filter | SENSe:DISTortion:MEASure:FILTer | None | 
      
        | Alpha | SENSe:DISTortion:MEASure:FILTer:ALPHa | None | 
      
        | Symbol Rate | SENSe:DISTortion:MEASure:FILTer:SRATe SENSe:DISTortion:MEASure:FILTer:SRATe:AUTO[:STATe] | None None | 
      
        |  | EVM Normalization | SENSe:DISTortion:EVM:NORMalize | None | 
      
        |  | Phase Stitching | SENSe:DISTortion:PHASe:STITching:TYPE | None | 
      
        |  |       Nominal DUT NF | SENSe:DISTortion:PATH:DUT:NOMinal:NF | None | 
      
        | ADVANCED - Measurement Band Table | 
      
        | Add Band 
 | SENSe:DISTortion:MEASure:BAND:ADD SENSe:DISTortion:MEASure:BAND:COUNt? SENSe:DISTortion:MEASure:BAND:NAME | None None None | 
      
        | Delete Band | SENSe:DISTortion:MEASure:BAND:DELete | None | 
      
        | Autofill from Mod File | None | None | 
      
        | Reset Bands to defaults | SENSe:DISTortion:MEASure:BAND:INITialize | None |