:MEASure:AMPLitude:DEFine:UNITs

Flex Apps:
FlexDCA
Meas. mode:
Jitter
Waveform type:
NRZ
Meas. panel:
Jitter
Amplitude Definition Commands

Command Syntax

:MEASure:AMPLitude:DEFine:UNITs  {VOLT | WATT | UAMPlitude}

Query Syntax

:MEASure:AMPLitude:DEFine:UNITs?

Description

Selects the noise/interference measurement units, which can be either volts, watts, or unit amplitude.

Amplitude analysis must be turned on before the first interference measurement can be made. Use the :MEASure:AMPLitude:DEFine:ANALysis command.