:MEASure:JITTer:OJITter:J4U

Meas. mode:
Jitter
Waveform type:
PAM4
Waveform record:
MV

Deprecated command. For FlexDCA revision A.05.85 and above, use the :MEASure:JITTer:OJITter:JNU command instead.

Command Syntax

:MEASure:JITTer:OJITter:J4U

Query Syntax

:MEASure:JITTer:OJITter:J4U?

Description

Send this command to move the J4u measurement results to the top of Jitter Mode's Output Jitter panel. Send the query form of this command to return the IEEE J4U measurement result. The default returned measurement is based on all waveform edges. To return a measurement result that is based on one of twelve specific waveform edges, use the :MEASure:JITTer:OJITter:J4U:ECATegory command.

Before the :MEASure:JITTer:OJITter:J4U command can be used, you must turn on all IEEE measurements by sending the :MEASure:JITTer:OJITter:STATe command.

Requires FlexDCA revision A.05.70 and above.

Common Measurement Child Queries

Common measurement queries. :COUNt?, :LOCation?, :MAXimum?, :MINimum?, :MEAN?, and :SDEViation?.