<MaskY1> Element

Eye Mask Toolbar
Creating Masks

Use this element to shift the mask's Y-axis position as it sets the voltage level of a logic 0. The mask vertices are defined in relation to the specified logic 0 and logic 1 levels. Use the <MaskY2> element to set the logic 1 level. The element's value is the logic 0 level in Volts. For example, entering a value of "−0.2" indicates −200 mV as shown in the example in this topic.

The element sets the <MaskScaleMode> to XONLY. It also sets the Logic 0 Level in the Mask Test Scaling dialog (Measure > Eye/Mask Mode > Mask Test Scaling).

Parent Elements

Child Elements

None.

Attributes

None.

Example

  • <MaskY1>-0.2</MaskY1>