Markers: Basics | Ref | Advanced | Function | Search: Bandwidth | SA Band Marker Settings | Compression | PSAT | PNOP
| Math | Limits | PassFail | Statistics | Gating | Transform | Eq Editor
|
Description |
SCPI |
COM |
|---|---|---|
|
ON|OFF |
||
|
Delete All Markers |
||
|
Delete Marker |
||
|
Delta Marker |
||
|
Viewing Marker readouts |
||
|
Get a handle to Ref marker |
N/A |
|
|
Reference Marker On | Off |
||
|
Set and read X-axis location |
||
|
Read Y-axis location |
||
|
Interpolate All Markers (Discrete) |
None |
|
|
Interpolate Individ. Marker (Discrete) |
||
|
Type (Normal | Fixed) |
||
|
Format Individ. Marker |
||
|
Coupled Markers |
||
|
Coupled Markers Method |
||
|
Read/Set Data Point number |
||
|
Read/Set X-axis value |
||
|
Read/Set Y-axis value |
||
|
Marker=> SA |
||
|
Marker=> Span |
None |
|
|
Marker=> Center (Freq) |
||
|
Marker=> CW Freq and change sweep type |
||
|
Marker=> Start (Freq) |
||
|
Marker=> Stop (Freq) |
||
|
Marker=> Elect. Delay |
||
|
Marker=> Ref. Level |
||
|
Marker=> CW Freq - No sweep type change |
||
|
Execute Search |
|
|
|
Select Search Function |
select and execute each Search... |
|
|
Maximum |
||
|
Minimum |
||
|
Target (Value) |
||
|
Excursion Value |
||
|
Threshold Value |
||
|
Assign Marker to Domain |
||
|
Domain Range Start |
||
|
Domain Range Stop |
||
|
Tracking |
mark.SearchFunction |
|
|
Bandwidth (Target) |
||
|
Search Filter Bandwidth |
||
|
Read Filter BandWidth |
||
|
Read Filter Center Freq |
||
|
Read Filter Loss |
||
|
Read Filter Q |
||
|
Read Band Power |
||
|
Read Band Power Span |
||
|
Set Band Power State |
||
|
Read Band Noise |
||
|
Read Band Noise Span |
||
|
Set Band Noise State |
||
|
Compression Marker level found. |
||
|
Read Compression Marker Input power |
||
|
Read Compression Marker Output power |
||
|
Search function |
||
|
Execute function |
||
|
Initiate a PSAT search |
||
|
Set and read PSAT backoff |
||
|
Read PSat Out |
||
|
Read PSat In |
||
|
Read PMax Out |
||
|
Read PMax In |
||
|
Read Gain Sat |
||
|
Read Gain Max |
||
|
Read Gain Linear |
||
|
Read Comp Sat |
||
|
Read Comp Max |
||
|
Initiate a PNOP search |
||
|
PNOP backoff |
||
|
PNOP Power Offset |
||
|
Read Pnop Out |
||
|
Read Pnop in |
||
|
Read Pnop Gain |
||
|
Read Pnop Comp |
||
|
Read PMax Out |
||
|
Read PMax In |
||
|
Read Gain Max |
||
|
Read Comp Max |
||
|
Read PBO Out |
||
|
Read PBO In |
||
|
Read PBO Gain |
||
|
Data Trace ON|OFF |
||
|
Memory Trace ON|OFF |
||
|
Data =>Memory |
||
|
Trace Math (Add|Sub|Mult|Div) |
||
|
Sets and reads the state of the memory data interpolation |
||
|
Display Lines ON|OFF |
||
|
Fail Sound ON|OFF |
||
|
Testing ON|OFF |
||
|
Limit Test Failed |
||
|
Count Limit Lines |
None |
|
|
Read Test Results |
||
|
Set / Read entire Limit Line |
None |
|
|
Limit Line Type (Max|Min) |
||
|
Begin Stimulus |
||
|
End Stimulus |
||
|
Begin Response |
||
|
End Response |
||
|
Show Limit table |
||
|
Sets and returns the X-axis position of the Limit Line Pass/Fail indicator |
||
|
Sets and returns the Y-axis position of the Limit Line Pass/Fail indicator |
||
|
Show / hide the pass/fail dialog. |
||
|
Sets the policy used to compute the global pass/fail value. |
||
|
Reads the most recent pass/fail status value. |
||
|
Sets the logic of the AuxIO PassFail line. |
||
|
Sets the default logical pass/fail state. |
||
|
Sets the scope (Global or channel) of AuxIO pass/fail testing. |
||
|
Statistics ON|OFF |
||
|
Statistics Range |
||
|
Domain Range Start |
||
|
Domain Range Stop |
||
|
Set Type (Pk-Pk|StdDev|Mean) |
Set individually |
|
|
Get All Statistics Data |
||
|
Get Standard Deviation |
||
|
Get Mean |
||
|
Get Peak to Peak |
||
|
Transform ON|OFF |
||
|
Mode (LowPass, BandPass) |
||
|
Start Time |
||
|
Stop Time |
||
|
Center |
||
|
Span |
||
|
Step Rise Time |
||
|
Set Low Pass Frequency |
||
|
Enable trace coupling |
||
|
Set transform coupling parameters |
||
|
Specify measurement type for distance markers |
||
|
Specify units for distance markers |
||
|
Set and return marker distance value |
||
|
ON|OFF |
||
|
Type (BandPass, Notch) |
||
|
Shape |
||
|
Start |
||
|
Stop |
||
|
Center |
||
|
Span |
||
|
Set gate coupling parameters |
||
|
Kaiser Beta |
||
|
Impulse Width |
||
|
Turn ON / OFF equation |
||
|
Set equation |
||
|
Return validity of equation |
||
|
Returns the functions in DLL. |
||
|
Imports the functions in DLL |
||
|
Is DLL Imported? |
||
|
Remove a DLL |
||