:MEASure:JITTer:DEFine:SIGNal:AUTodetect

Meas. mode:
Jitter
Waveform type:
NRZ
Flex Apps:
FlexDCA
FlexRT
Jitter Define Commands

Command Syntax

:MEASure:JITTer:DEFine:SIGNal:AUTodetect{? {ON | OFF | 1 | 0}

Query Response

{1 | 0}

Description

Selects to automatically detect the type of input signal: data or clock. The default is autodetection (ON). If a poorly-defined signal can not be automatically detected, turn off automatic detection specify the signal type with the :MEASure:JITTer:DEFine:SIGNal command.