In this topic:
Related MMEMory commands
- Commands that are Common to All Modes
- Correction Methods Explained
|
Returns a set of values |
|
|
Returns TER total values |
|
|
Sets the folder path to Default or System |
|
Set freq and pow |
|
|
Set up and down sort order |
|
|
Set display window trace Y Pow division |
|
|
Set display window trace Y Ref level |
|
Returns a set of values |
|
|
Add comma separated list item |
|
|
Clears all items from list |
|
|
Returns a set of values for EMF custom list configured limit line |
|
|
Add comma separated list item to EMF custom list configured limit line |
|
|
Clears all items from EMF custom list |
|
Reads or writes items in Range mode |
|
|
Set integration bandwidth |
|
|
Set CF of first channel defined in Range mode |
|
|
Set freq separation between channels in Range mode |
|
|
Set the resolution bandwidth tradeoff mode |
|
Limit lines auto sync |
|
|
Create limit lines |
|
|
Export EMF Custom List to Limit line file |
|
|
Returns a set of values for EMF custom list limit lines |
|
|
Add comma separated list item to EMF custom list limit lines |
|
|
Clears all items from EMF custom list limit lines |
|
|
Enable or Disable EMF custom list relative mode |
|
|
Set optional column choice in the EMF custom list limit line table |
|
All corrections OFF |
|
|
All corrections ON |
[:SENSe]:AMPLitude:CORRections[:STATe] (SUPERSEDED) |
Receiver (or ONLY one) Antenna/Cables
|
Load Antenna file |
|
|
Store Antenna file |
|
|
Load Cable file |
|
|
Store Cable file |
|
|
Antenna corrections ON |
|
|
Cable corrections ON |
|
|
Clear Antenna correction values |
|
|
Clear Cable correction values |
|
|
Display corrections window |
|
Enable or disable the log file auto-save |
|
|
Sets the data log file save/recall folder location |
|
|
Sets the log file save type |
|
|
Read and writes the distance interval |
|
|
Read and write the time interval |
|
|
Set type of interval |
|
|
Enable or disable the measurement interval |
|
|
Resume playback |
|
|
Sets the position number of component carrier manually, when paused. |
|
|
Play |
|
|
Stop playback |
|
|
Sets the data log playback state |
|
|
Pause |
|
|
Begin recording results |
|
|
Stop recording |
|
|
Query the state |
|
Sets the user folder path to default or system |
|
Set the number of channels to scan |
|
|
Enable or Disable number of channels auto scan |
|
|
Set top or bottom number of channels |
|
Align all now (coupled to all individual alignments) |
|
|
Align all state (coupled to all individual alignments) |
|
|
Align now |
|
|
InstAlign state |
|
Set the active channel |
|
|
Set the RF attenuator value manually |
|
|
Set the RF attenuator to Auto |
|
|
Set the Extrapolation factor |
|
|
Set the external Gain |
|
|
Enable or disable the Gain state |
|
Set Units |
|
Set the averaging count |
|
|
Set the time averaging duration |
|
|
Enable or Disable the averaging state |
|
|
Enable or Disable the time averaging state |
|
|
Set the displayed sweep type |
|
|
Set the sweep mode |
|
Updates maps with current setting for latitude/longitude. |
|
|
Specify the name of a file in source folder and Unzip the results copied to a destination folder |
|
Set SA Listen D type |
|
|
Set SA Listen L Time value |
|
|
Pause data recording |
|
|
Resume date recording |
|
Save a CSV|KML formatted file to Channel Scanner folder |
|
|
Load a *.csv or *.kml log file |
|
|
Load a *.csv custom list file |
|
|
Save a *csv custom list file |
Last Modified:
|
10jun2024 |
Added new commands (A12.95) |
|
01dec2020 |
Added new topic/commands (A12.1x) |
|
01dec2019 |
Added new topic/commands (A11.5x) |