XTraceChanTopic

VNA Help

Click here to see this page in full context

Description	SCPI	COM
Trace
New Trace	DISPlay:WINDow:TRACe[:STATe]	View
Select Trace	DISPlay:WINDow:TRACe:SELect	View
Measure	CALCulate:MEASure:PARameter	CreateSParameterEx
Trace Title	DISPlay:WINDow:TRACe:TITLe:DATA DISPlay:WINDow:TRACe:TITLe[:STATe]	Title TraceTitleState
Add Trace	DISPlay:WINDow:TRACe[:STATe]	View
Delete Trace	DISPlay:WINDow:TRACe:DELete	None
Move Trace	DISPlay:WINDow:TRACe:MOVE	Move
Hold Trace	CALCulate:MEASure:HOLD:TYPE CALCulate:MEASure:HOLD:CLEar	TraceHoldType TraceHoldClear
Set/get the number of traces of selected channel	CALCulate:PARameter:COUNt	None
Trace Maximize	DISPlay:TMAX	TraceMax

Channel
Add	None	chans.Add
Make Active	None	app.ActiveChannel
Read Channel Number	SYSTem:ACTive:CHANnel?	chan.ChannelNumber
Read UNUSED channel numbers	None	chans.UnusedChannelNumbers
Read used channel numbers	None	chans.UsedChannelNumbers
Read number of Channels	None	chans.Count
Copy all Channel settings	SYSTem:MACRo:COPY:CHANnel	chan.CopyToChannel
Copy ONLY mechanical switches and attenuator settings.	SENSe:PATH:CONFig:COPY	CopyFrom
Delete a channel	SYSTem:CHANnels:DELete	Remove Method RemoveChannelNumber
Set and return the group of channels	SYSTem:CHANnels:COUPle:GROup	None
Set and return the Multi DUT parallel measurement state	SYSTem:CHANnels:COUPle:PARallel[:ENABle]	None
Get the information if the parallel measurement is executed in the last sweep	SYSTem:CHANnels:COUPle:PARallel:STATe?	None
Set up multiple channels for manual trigger	SYSTem:CHANnels:SINGle	None

Display - Window Setup
Select Window	DISPlay:WINDow:TRACe:SELect	ActivateWindow
Window Title	DISPlay:WINDow:TITLe[:STATe]	TitleState
Add Window	DISPlay:WINDow[:STATe]	Add
Delete Window	DISPlay:WINDow[:STATe]	None
Move Window	DISPlay:WINDow:TRACe:MOVE	Move
Window Layout	DISPlay:ARRange	ArrangeWindows
Window Max	DISPlay:WINDow:SIZe	WindowState
Return Window Number(s)	DISPlay:CATalog?	win.WindowNumber
Read the window number of the selected trace	CALCulate:PARameter:WNUMber	win.WindowNumber
Creates N windows	DISPlay:SPLit	None
Feed specified measurement to specified window	DISPlay:WINDow:TRACe:FEED:MNUMber	None
Returns the next unused trace number	DISPlay:WINDow:TRACe:NEXT[:NUMBer]	None
Set graph divisions	DISPlay:WINDow:Y[:SCALe]:DIVisions	None

Display - Sheet Setup
Select Sheet	DISPlay:SHEet:STATe	None
Sheet Title	DISPlay:SHEet:TITle:DATA	None
Add Sheet	DISPlay:SHEet:STATe DISPlay:WINDow:FEED	None
Delete Sheet	DISPlay:SHEet:STATe	None
Sheet Layout	DISPlay:SHEet:ARRange	None
Get list of window numbers which the sheet contains	DISPlay:SHEet:CATalog?	None
Feed specified window to a sheet	DISPlay:WINDow:FEED	None
Return active sheet number	SYSTem:ACTive:SHEet	None
Return list of visible sheets	SYSTem:SHEets:CATalog?	None

Display Setup
Trace Status	DISPlay:WINDow:ANNotation[:TRACe][:STATe]	None
Y-axis Labels	DISPlay:WINDow:ANNotation:Y[:STATe]	None
Show Marker Readout	DISPlay:WINDow:ANNotation:MARKer[:STATe]	MarkerReadout
Large Readout	DISPlay:WINDow:ANNotation:MARKer:SIZE	MarkerReadoutSize
Readouts Per Trace	DISPlay:WINDow:ANNotation:MARKer:NUMBer	MarkerReadoutsPerTrace
Sets the marker readouts to coupled (one combination annotation) or not coupled (one annotation per trace).	DISPlay:WINDow:ANNotation:MARKer:COUPle	None
Shows the marker readouts only for active trace or for all traces.	DISPlay:WINDow:ANNotation:MARKer:VISible	None
Symbol - Triangle, Flag, and Line	DISPlay:WINDow:ANNotation:MARKer:SYMBol	MarkerSymbol
Decimal Places - Stimulus and Response	DISPlay:WINDow:ANNotation:MARKer:RESolution:STIMulus DISPlay:WINDow:ANNotation:MARKer:RESolution:RESPonse	MarkerReadoutStimulusPlaces
Readout Position - X and Y	DISPlay:WINDow:ANNotation:MARKer:XPOSition DISPlay:WINDow:ANNotation:MARKer:YPOSition	MarkerReadoutXPosition MarkerReadoutYPosition
Marker Colors	DISPlay:COLor:TRACe:MARKer	Markers
N Trace: Markers	DISPlay:COLor:TRACe:MARKer	Markers
N Trace: Memory Markers	DISPlay:COLor:TRACe:MMARker	MemoryMarkers
Reset Color	DISPlay:COLor:RESet	None
Save Theme	DISPlay:COLor:STORe	StoreTheme
Recall Theme	DISPlay:COLor:LOAD	LoadTheme
Reset Theme	DISPlay:COLor:RESet	ResetTheme
Grid Lines - Solid \| Dotted	DISPlay:WINDow:TRACe:GRATicule:GRID:LTYPe	GridLineType
Y-axis Divisions - 2 to 30	DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision	YScale
Show Table - None, Marker, Limit, Ripple, and Segment	DISPlay:WINDow:TABLe	ShowTable
Toolbar Softkey	DISPlay:TOOLbar:KEYS[:STATe]	ShowToolbar
Toolbar Hardkey	DISPlay:TOOLbar:KEYS[:STATe]	ShowToolbar
Toolbar Port Extensions	DISPlay:TOOLbar:EXTensions[:STATe]	ShowToolbar
Toolbar Transform	DISPlay:TOOLbar:TRANsform[:STATe]	ShowToolbar
Toolbar Marker	DISPlay:TOOLbar:MARKer[:STATe]	ShowToolbar
Toolbar Cal Set Viewer	DISPlay:TOOLbar:CSET[:STATe]	None
Active Entry Toolbar	DISPlay:TOOLbar:ENTry[:STATe]	ShowToolbar
Toolbar Status Bar	DISPlay:ANNotation[:STATus]	ShowStatusBar
Status Bar	DISPlay:ANNotation[:STATus]	ShowStatusBar
Status Bar Clock	SYSTem:CLOCk[:STATe]	None
Default Colors	DISPlay:COLor:RESet	ResetTheme
Background Colors	DISPlay:COLor:BACKground	Background
Active Background Color	DISPlay:COLor:ABACkground	ActiveBackground
Grid Colors	DISPlay:COLor:GRAT2	Grid
Active Labels, Grid Frame Colors	DISPlay:COLor:GRAT1	ActiveLabels
Inactive Window Labels Colors	DISPlay:COLor:ILABel	InactiveLabels
Failed Trace Colors	DISPlay:COLor:LIM1	FailedTraces
N Trace: Data and Limits Colors	DISPlay:COLor:TRACe:DATA	DataAndLimits
N Trace: Memory	DISPlay:COLor:TRACe:MEMory	Memory
Display Update	DISPlay:UPDate[:STATe] DISPlay:UPDate:IMMediate	None

Configure External Devices
Adds an external device to the system.	SYSTem:CONFigure:EDEVice:ADD	Add (External Device)
Returns names of all configured devices	SYSTem:CONFigure:EDEV:iceCAT?	Items
Set driver for the external device.	SYSTem:CONFigure:EDEVice:DRIVer	Driver
Set type of device.	SYSTem:CONFigure:EDEVice:DTYPe	DeviceType
Configuration path for external device.	SYSTem:CONFigure:EDEVice:IOConfig	IOConfiguration
Enable or disable communication with device.	SYSTem:CONFigure:EDEVice:IOENable	IOEnable
Enable/disable an SMU channel.	SYSTem:CONFigure:EDEVice:SMU:CHANnel[1-4]:STATe	ChanActive
Sets and returns the name of the External Device.	None	Name
Activation state of the device.	SYSTem:CONFigure:EDEVice:STATe	Active
Time out value for external device.	SYSTem:CONFigure:EDEVice:TOUT	TimeOut
Remove a device	SYSTem:CONFigure:EDEVice:REMove	Remove
Save configuration file	SYSTem:CONFigure:EDEVice:SAVE	SaveFile
Load configuration file	SYSTem:CONFigure:EDEVice:LOAD	LoadFile
Returns if specified device responds	SYSTem:CONFigure:EDEVice:EXISts?	IsDevicePresent

External Source Config
Set Dwell per Point	SYSTem:CONFigure:EDEVice:SOURce:DPP	DwellPerPoint
Set Trigger Mode	SYSTem:CONFigure:EDEVice:SOURce:TMODe	Trigger Mode
Set Trigger Port	SYSTem:CONFigure:EDEVice:SOURce:TPORt	TriggerPort
Set Modulation Control	SYSTem:CONFigure:EDEVice:SOURce:MODulation:CONTrol	None

Source Modulation
Sets and reads the frequency of the arbitrary waveform generator.	SOURce:MODulation:ARB:CLOCk:SRATe	None
Sets and reads the I data for I/Q modulation.	SOURce:MODulation:ARB:DATA:I	None
Sets and reads the Q data for I/Q modulation.	SOURce:MODulation:ARB:DATA:Q	None
Set and read the modulation state.	SOURce:MODulation[:STATe]	None
Checks if pulse source exists.	SOURce:PULSe:EXISts?	None
Turns pulse modulation on and off with an external source.	SOURce:PULSe:MODulation[:STATe]	None
Sets and reads the maximum number of iterations for an ACP modulation calibration.	SOURce:MODulation:CORRection:COLLection:ACP:ITERations	None
Sets and reads the calibration plane for an ACP modulation calibration.	SOURce:MODulation:CORRection:COLLection:ACP:RECeiver	None
Sets and reads the calibration span for an ACP modulation calibration.	SOURce:MODulation:CORRection:COLLection:ACP:SPAN	None
Set and read the ACP modulation calibration state.	SOURce:MODulation:CORRection:COLLection:ACP:ENABle	None
Sets and reads the desired ACP calibration tolerance for the ACP modulation calibration.	SOURce:MODulation:CORRection:COLLection:ACP:TOLerance	None
Sets the Notch location.	SOURce:MODulation:CORRection:COLLection:ACQuire	None
Returns a message indicating if the calibration was successful or not.	SOURce:MODulation:CORRection:COLLection:ACQuire:STATus?	None
Sets and reads the maximum number of iterations for a flatness modulation calibration.	SOURce:MODulation:CORRection:COLLection:FLATness:ITERations	None
Sets and reads the calibration plane for flatness modulation calibration.	SOURce:MODulation:CORRection:COLLection:FLATness:RECeiver	None
Sets and reads the calibration span for a flatness modulation calibration.	SOURce:MODulation:CORRection:COLLection:FLATness:SPAN	None
Set and read the flatness modulation calibration state.	SOURce:MODulation:CORRection:COLLection:FLATness:ENABle	None
Sets and reads the desired flatness calibration tolerance for the flatness modulation calibration.	SOURce:MODulation:CORRection:COLLection:FLATness:TOLerance	None
Sets and reads the maximum number of iterations to provide the deepest notch.	SOURce:MODulation:CORRection:COLLection:NOTch:ITERations	None
Sets and reads the calibration plane for an notch modulation calibration.	SOURce:MODulation:CORRection:COLLection:NOTch:RECeiver	None
Sets and reads the calibration span for a notch modulation calibration.	SOURce:MODulation:CORRection:COLLection:NOTch:SPAN	None
Set and read the notch modulation calibration state.	SOURce:MODulation:CORRection:COLLection:NOTch:ENABle	None
Sets and reads the desired notch calibration tolerance for the notch modulation calibration.	SOURce:MODulation:CORRection:COLLection:NOTch:TOLerance	None
Sets and reads the maximum number of iterations for a power modulation calibration.	SOURce:MODulation:CORRection:COLLection:POWer:ITERations	None
Sets and reads the calibration plane for a power modulation calibration.	SOURce:MODulation:CORRection:COLLection:POWer:RECeiver	None
Sets and reads the calibration span for a power modulation calibration.	SOURce:MODulation:CORRection:COLLection:POWer:SPAN	None
Set and read the power modulation calibration state.	SOURce:MODulation:CORRection:COLLection:POWer:ENABle	None
Sets and reads the desired power calibration tolerance for the power modulation calibration.	SOURce:MODulation:CORRection:COLLection:POWer:TOLerance	None
Set and read the modulation correction state.	SOURce:MODulation:CORRection[:STATe]	None
Returns a list of modulation files (*.mdx).	SOURce:MODulation:FILE	None
Loads the specified modulation file.	SOURce:MODulation:LOAD	None
Saves the specified modulation file.	SOURce:MODulation:SAVE	None
Enables fast calibration.	SOURce:MODulation:CORRection:COLLection:FAST:ENABle	None

Power Meter As Receiver (PMAR) Config See commands to configure and specify a Non- PMAR Power Sensor
Enable use of internal cal factors	SYSTem:CONFigure:EDEVice:PMAR:CFACtors[:STATe]	UseInternalCalFactors
Enable min and max freqs	SYSTem:CONFigure:EDEVice:PMAR:FLIMit	LimitFrequency
Set Max freq	SYSTem:CONFigure:EDEVice:PMAR:FMAXimum	MaximiumFrequency
Set Min freq	SYSTem:CONFigure:EDEVice:PMAR:FMINimum	MinimumFrequency
Set max number of PM readings	SYSTem:CONFigure:EDEVice:PMAR:READing:COUNt	ReadingsPerPoint
Set tolerance level	SYSTem:CONFigure:EDEVice:PMAR:READing:NTOLerance	ReadingsTolerance
Select sensor	SYSTem:CONFigure:EDEVice:PMAR:SENSor	SensorIndex
Set Cal Factor data	SYSTem:CONFigure:EDEVice:PMAR:TABLe:CFAC:DATA	ReferenceCalFactor
Set Cal Factor frequencies	SYSTem:CONFigure:EDEVice:PMAR:TABLe:CFAC:FREQuency	Frequency
Set Power loss data	SYSTem:CONFigure:EDEVice:PMAR:TABLe:LOSS:DATA	Loss
Set Power loss frequencies	SYSTem:CONFigure:EDEVice:PMAR:TABLe:LOSS:FREQuency	Frequency
Enable Power loss data	SYSTem:CONFigure:EDEVice:PMAR:TABLe:LOSS:STATe	UsePowerLossSegments
Set reference cal factor	SYSTem:CONFigure:EDEVice:PMAR:TABLe:RFACtor	ReferenceCalFactor
Set Zero method	SYSTem:CONFigure:EDEVice:PMAR:ZERO	None
Perform Cal	SYSTem:CONFigure:EDEVice:PMAR:CALibrate	None
Returns a list of available power meters that have power uncertainty.	SYSTem:CONFigure:EDEVice:PMAR:UNCertainty:CATalog?	UncertaintyModelCatalog?
Sets and returns a custom model uncertainty file containing all of the power meter uncertainty properties.	SYSTem:CONFigure:EDEVice:PMAR:UNCertainty:FILE	UncertaintyFile
Returns a list of available power meters that have power uncertainty.	SYSTem:CONFigure:EDEVice:PMAR:UNCertainty:MODel	UncertaintyModel
Returns the power level for best accuracy.	SYSTem:CONFigure:EDEVice:PMAR:UNCertainty:PLEVel?	PowerForBestAccuracy
Returns the power meter reading uncertainty.	SYSTem:CONFigure:EDEVice:PMAR:UNCertainty:READ?	PowerMtrReadingUncertainty

External DC Source/Meter See DC Source sweep commands
Correction ON/OFF	SYSTem:CONFigure:EDEVice:DC:CORRection	DCCorrection
Offset correction value.	SYSTem:CONFigure:EDEVice:DC:OFFSet	DCOffset
Scale correction value.	SYSTem:CONFigure:EDEVice:DC:SCALe	DCScale
DC Type (Units).	SYSTem:CONFigure:EDEVice:DC:TYPE	DCType
Dwell Before/After Point	SYSTem:CONFigure:EDEVice:DC:DPOint	PointDwell
Dwell Before Sweep value	SYSTem:CONFigure:EDEVice:DC:DSWeep	SweepDwell
Set and return the maximum output current value of the external DC Source	SYSTem:CONFigure:EDEVice:DC:LIMit:CURRent	CurrentLimit
Set and return the maximum output voltage value of the external DC Source	SYSTem:CONFigure:EDEVice:DC:LIMit:VOLTage	VoltageLimit
Set and return the DC Meter/DC Source Abort Sweep command	SYSTem:CONFigure:EDEVice:DC:COMMand:SWEep:ABORt	AbortSweepCmd
Set and return the DC Meter/DC Source After Sweep command	SYSTem:CONFigure:EDEVice:DC:COMMand:SWEep:AFTer	AfterSweepCmd
Set and return the DC Meter/DC Source Before Sweep command	SYSTem:CONFigure:EDEVice:DC:COMMand:SWEep:BEFore	BeforeSweepCmd
Set and return the DC Meter/DC Source Error Query command	SYSTem:CONFigure:EDEVice:DC:QUERy:ERRor	ErrorQuery
Set and return the DC Meter/DC Source Disable I/O command	SYSTem:CONFigure:EDEVice:DC:COMMand:EXIT	ExitCmd
Set and return the DC Meter/DC Source ID Query command	SYSTem:CONFigure:EDEVice:DC:QUERy:ID	IDQuery
Set and return the DC Meter/DC Source Enable I/O command	SYSTem:CONFigure:EDEVice:DC:COMMand:INIT	InitCmd
Set and return the DC Source maximum output	SYSTem:CONFigure:EDEVice:DC:MAX:VALue	MaxOutput
Set and return the DC Source maximum output state	SYSTem:CONFigure:EDEVice:DC:MAX[:STATe]	MaxOutputState
Set and return the DC Source minimum output	SYSTem:CONFigure:EDEVice:DC:MIN:VALue	MinOutput
Set and return the DC Source minimum output state	SYSTem:CONFigure:EDEVice:DC:MIN[:STATe]	MinOutputState
Set and return the Point Read commands and Point Set commands	SYSTem:CONFigure:EDEVice:DC:COMMand:POINt:SET	PointCmd

External Pulse Generators
PG Names catalog	SENSe:PULSe:CATalog?	PulseGeneratorNames
Read the integer of the name	Not applicable	PulseGeneratorID
Set output channel	SYSTem:CONFigure:EDEVice:PULSe:CHAN	OutputChannel
Set output Hi amplitude (volts)	SYSTem:CONFigure:EDEVice:PULSe:HAMP	HighAmplitude
Set output Low amplitude (volts)	SYSTem:CONFigure:EDEVice:PULSe:LAMP	LowAmplitude
Set load impedance	SYSTem:CONFigure:EDEVice:PULSe:LIMP	LoadImpedance
Set source impedance	SYSTem:CONFigure:EDEVice:PULSe:SIMP	SourceImpedance
Master Mode	SYSTem:CONFigure:EDEVice:PULSe:MMODe	MasterMode
Optional Name/ID argument added to some Pulse gen commands.	SENSe:PULSe	PulseGenerator Object

New Measurement
Create S-Parameter Meas.	CALCulate:MEASure::DEFine	app.CreateSParameterEx
Create Measurement	CALCulate:MEASure::DEFine	app.CreateMeasurement
Add Measurement	None	meass.Add
List Measurements	CALCulate:PARameter:CATalog:EXTended	None
Delete Measurement
Delete a measurement	CALCulate:MEASure::DELete	Measurements.Remove
Delete ALL measurements	CALCulate:MEASure::DELete:ALL	None
Manage Measurements
Get a handle to a Trace	None	win.ActiveTrace
Select a Measurement Parameter	CALCulate:PARameter:SELect	app.ActiveMeasurement
Read Channel Number	SYSTem:ACTive:CHANnel?	chan.ChannelNumber
Read Channel Numbers in use	SYSTem:CHANnels:CATalog?	None
Read Number of Measurements	None	chans.Count
Read Measurement Parameter	None	meas.Parameter
Set / Read Measurement Name	SYSTem:ACTive:MEASurement (read-only)	meas.Name
Read Active Measurement Number	SYSTem:ACTive:MEASurement:NUMBer?	meas.Number
Change Parameter	CALCulate:MEASure:PARameter	meas.ChangeParameter
Returns the Measurement Class name	SENSe:CLASs:NAME?	Get_MeasurementClass
Read the window number of the selected trace	CALCulate:PARameter:WNUMber	None
Read the trace number of the selected trace	CALCulate:PARameter:TNUMber?	None
Maximize (Isolate) trace	DISPlay:TMAX	TraceMax
Move a trace to another window	DISPlay:WINDow:TRACe:MOVE	Trace.Move
Trace Hold	CALCulate:MEASure:HOLD:TYPE	TraceHoldType
Trace Hold Clear	CALCulate:MEASure:HOLD:CLEar	TraceHoldClear
Deletes the trace associated with the specified measurement number	DISPlay:MEASure:DELete	None
Create a new trace in the specified window	DISPlay:MEASure:FEED	None
Turn the memory trace ON or OFF for the specified measurement	DISPlay:MEASure:MEMory[:STATe]	None
Move a trace associated with measurement number to the specified window	DISPlay:MEASure:MOVE	None
Activate the specified measurement to be selected	DISPlay:MEASure:SELect	None
Turn trace display associated with the specified measurement ON or OFF	DISPlay:MEASure[:STATe]	None
Set or return the title for the specified measurement	DISPlay:MEASure:TITLe:DATA	None
Turn the measurement title ON or OFF	DISPlay:MEASure:TITLe[:STATe]	None
Autoscale the specified trace in the specified measurement	DISPlay:MEASure:Y[:SCALe]:AUTO	None
Set the Y axis Scale Per Division value of the specified trace associated with the specified measurement	DISPlay:MEASure:Y[:SCALe]:PDIVision	None
Set the Y axis Reference Level of the specified trace associated with the specified measurement	DISPlay:MEASure:Y[:SCALe]:RLEVel	None
Set the Reference Position of the specified trace associated with the specified measurement	DISPlay:MEASure:Y[:SCALe]:RPOSition	None
All Measurement Classes / Applications

Balanced Measurements and Fixturing
Configure Topology	CALCulate:FSIMulator:BALun	BalancedTopology Object
Configure Balanced Measurement	CALCulate:FSIMulator:BALun	BalancedMeasurement Object
Maps the physical VNA ports to a device of balanced and single-ended logical ports for multi-port systems with greater than 4 ports	CALCulate:DTOPology	SetCustomDUTTopology

Interface Control
Interface Control ON\|OFF	CONTrol:CHANnel:INTerface:CONTrol[:STATe]	IC.State
Recall Interface Control file	CONTrol:CHANnel:INTerface:CONTrol:CONFig:RECall	IC.ConfigurationFile

External Testset Control (also for E5092A)
Returns a list of currently supported test sets.	SENSe:MULTiplexer:CATalog?	tsts.TestsetCalalog
Load config file and Restart VNA.	SYSTem:CONFigure	app.Configure
Loads a test set configuration file. (and SCPI only - sets ID value).	SENSe:MULTiplexer:TYPE	ts.Add
Returns the test set model	SENSe:MULTiplexer:TYPE	ts.Type
Returns the test set ID number.	None	ts.ID
Returns the number of input ports	SENSe:MULTiplexer:INCount?	None
Switches an input to one of the valid outputs (E5091A only).	None	OutputPort
Returns the total number of ports on the test set.	SENSe:MULTiplexer:COUNt?	NumberOfPorts
Sets and returns the address for the external test set at the specified ID.	SENSe:MULTiplexer:ADDRess	None
Turns ON/OFF the port mapping and control line output.	SENSe:MULTiplexer:STATe	Enabled
Sets and returns the port mappings for ALL ports.	SENSe:MULTiplexer:ALLPorts	OutputPorts
Sets and returns the mapping for a single port.	SENSe:MULTiplexer:PORT:SELect	ts.SelectPort
Returns the label on a given channel.	SENSe:MULTiplexer:LABel	Label
Turns ON/OFF status bar display of test set properties.	SENSe:MULTiplexer:DISPlay	ShowProperties
Sets the control lines.	SENSe:MULTiplexer:OUTPut	ControlLines
Returns the selections available for a given logical port.	SENSe:MULTiplexer:PORT:CATalog?	PortCatalog
Reads a Cal Set for the Test Set model.	SENSe:CORRection:CSET:TSET:ALLPorts?	calset.OutputPorts
Reads a Cal Set for the Port Mapping.	SENSe:CORRection:CSET:TSET:TYPE?	calset.TestSetType
All Sense Multiplexer commands	SENSe:MULTiplexer	TestsetControl Object
All Control Multiplexer commands (E5092A only)	CONTrol:MULTiplexer	None

RF / IF Path Configuration (PNA-X)
Catalog configuration names	SENSe:PATH:CONFig:CATalog?	Configurations
Load a configuration	SENSe:PATH:CONFig:SELect	LoadConfiguration
Store a configuration	SENSe:PATH:CONFig:STORe	StoreConfiguration
Delete a configuration	SENSe:PATH:CONFig:DELete	DeleteConfiguration
Read the name of a configuration	SENSe:PATH:CONFig:NAME?	Name config
Write descriptive text	SENSe:PATH:CONFig:DTEXt	DescriptiveText
Catalog all elements	SENSe:PATH:CONFig:ELEMent:CATalog?	Elements
Catalog all settings	SENSe:PATH:CONFig:ELEMent:VALue:CATalog?	Values
Set element	SENSe:PATH:CONFig:ELEMent	Element
Set value for an element	SENSe:PATH:CONFig:ELEMent	Value
Read name of current element	SENSe:PATH:CONFig:ELEMent	element.Name
RF Path configuration elements / values IF Path configuration elements / values Power Range commands All Pulse commands

DSP Settings (PNA-X Remote only)
Sets ADC capture mode: auto or manual	SENSe:IF:FILTer:CMODe	ADCCaptureMode
Sets and returns method for specifying the way the IF Frequency is determined.	SENSe:IF:FREQuency:AUTO	IFFrequencyMode
Sets and returns the IF frequency.	SENSe:IF:FREQuency	IFFrequency
Returns the Maximum allowed IFFrequency	SENSe:IF:FREQuency	MaximumIFFrequency
Returns the Minimum allowed IFFrequency	SENSe:IF:FREQuency	MinimumIFFrequency
Returns errors with manual digital filter settings	SENSe:IF:FILTer:ERRors?	FilterErrors
Sets digital filter mode.	SENSe:IF:FILTer:AUTO	FilterMode
Sets Stage1Coefficients	SENSe:IF:FILTer:STAGE<n>:COEFicients	Stage1Coefficients
Sets Stage1 NCO frequency	SENSe:IF:FILTer:STAGe1:FREQuency	Stage1Frequency
Returns the maximum value of any single stage1coefficient.	SENSe:IF:FILTer:STAGe<n>:COEFicients	Stage1MaximumCoefficient
Returns the maximum number of Stage1 coefficients	SENSe:IF:FILTer:STAGe<n>:COUNt?	Stage1MaximumCoefficientCount
Returns the minimum number of Stage1 coefficients	SENSe:IF:FILTer:STAGe<n>:COUNt?	Stage1MinimumCoefficientCount
Sets Stage2Coefficients	SENSe:IF:FILTer:STAGe<n>:COEFicients	Stage2Coefficients
Returns the maximum value of any single stage2coefficient.	SENSe:IF:FILTer:STAGe<n>:COEFicients	Stage2MaximumCoefficient
Returns the maximum number of Stage2 coefficients	SENSe:IF:FILTer:STAGe<n>:COUNt?	Stage2MaximumCoefficientCount
Returns the minimum number of Stage2 coefficients	SENSe:IF:FILTer:STAGe<n>:COUNt?	Stage2MinimumCoefficientCount
Sets and returns stage3 filter type	SENSe:IF:FILTer:STAGe3:TYPE	Stage3FilterType
Returns the names of supported types of Stage3 filters.	SENSe:IF:FILTer:STAGe3:CATalog?	Stage3FilterTypes
Sets and returns the parameter value of the current filter type.	SENSe:IF:FILTer:STAGe3:PARameter	Stage3Parameter
Returns maximum parameter value for the current filter type.	SENSe:IF:FILTer:STAGe3:PARameter	Stage3ParameterMaximum
Returns minimum parameter value for the current filter type.	SENSe:IF:FILTer:STAGe3:PARameter	Stage3ParameterMinimum
Returns the names of parameters for the current filter type.	SENSe:IF:FILTer:STAGe3:PCATalog?	Stage3Parameters