What's New

What's New in VNA Code Version A.19.10.xx

• Added Import Power Cal and Source PMax Table Cal in Power Cal Setting.

• Leaky Calibration 

• Updated Save Data As Dialog

What's New in VNA Code Version A.19.00.xx

• This help includes: Example Setup for U7229x Amplifier Control

What's New in VNA Code Version A.18.40.xx

• Split Port Calibraion in Call All

• Virtual Port Indicator

• Cal Power Off Preference

• Power Offset/Limit During Cal

• (M983xA) GCA parallel measurement [Licensed Feature]

• Link VNA to 89600 VSA and Digital Predistortion (DPD) for M983xA single module only

• Added phase stitching type, export raw data and show ADC range in MOD setup

• Added Operating Gain and updated descriptions of power traces in Distortion Measurement Parameters

What's New in VNA Code Version A.17.60.xx

• Isolation Calibration is available in 2 port calibration using a mechanical cal kit.

• Smith Chart can be displayed during Noise Figure Calibration

• Ecal Temperature Query  

• Generic Ecal Control commands which supports multi-port Ecal (over 4 ports)

• Added capability to turn off noise receiver pulling during calibration

• Added support for importing Python files into the equation editor

• Hybrid Source enhancements

• Added Pulse Timing dialog for Standard measurements [Licensed Feature]

• (M983xA, M980xA) Supports M9168C/E PXI Programmable Step Attenuator Module

• X-axis Annotation setting for All or ActiveTrace

• (Except M937xA, P937xA) Preference: Factory Calibration can be turned off at default

• (M980xA) GCA parallel measurement [Licensed Feature]

• Digital modulation format: QAM-1024

What's New in VNA Code Version A.17.35.xx

• Code Emulator for E5071C supports the customized returned value for *OPT?.

• Include Loss in TDR fixture compensation  

What's New in VNA Code Version A.17.25.xx

• Multiport ECal for PXI Switches

• The current RF power level setting is displayed below the x-axis (between start/stop or center/span) (Standard class only)

• Add a SCPI command for the correction method in Spectrum Analysis (:SENS:CORR:METH:SA:PORT)

What's New in VNA Code Version A.17.20.xx

• Focus Tuner support with Noise Figure Application (M983xA)

• New SMU (PZ2100A, PZ2121A, PZ2131A) Support 

• SCPI Recorder

• Multiple Memory Traces  

• Calset Property Dialog shows more information

• Cal Kit Editor Change

• Improved Edit Visa Address

• MOD/X DC trace

• Save and Recall Calibration Configuration

• DUT SNP simulation for SMC and GCA /GCX (Simulator only)

• ECal emulation on VNA simulator (Simulator only)

What's New in VNA Code Version A.17.05.xx

• Support S95011B, S95027B, S95088B, S95089B,S95460B and S95553B for M983xA

• (S95111B) Support Active Hot Parameter for the M98xA and M983xA.

• LAN Socket for M98xxA, P50xxA/B and P93xxB

• Added a Hybrid Source driver, which combines a source and a mixer to create a high-frequency source. This new driver selection appears the External Device Configuration dialog.

What's New in VNA Code Version A.16.70.xx

• Support the simulator for M9834A and M9837A.

• (S95070B) Support the Modulation Distortion Converter for the M983xA.

What's New in VNA Code Version A.16.20.xx

• Support the M9834A and M9837A. (The simulator has not been supported yet)

• Support the Core Software for PXI. (M98xxA, M938xA)

• Support the S97024B Basic Pulsed-RF Measurements Lite (P50xxA)

• Added new SCPI Example Programs in Python Environment

• Modulation Distortion Enchancements:

  • Added Ideal Wave Trace

  • Added Nominal DUT NF

  • Added PAPR prioritization for Compact Modulation  

• 8-term error correction method in IMD/IMDX

• (S95082B, S95083B, S95086B) Multi-sensor Power Calibration for SMC/GCX

• (S95029B-Licensed Feature) Noise Figure Sweep Switch commands (SENS:NOIS:SWE:MACR:FIL:RNP, SENS:NOIS:SWE:MACR:FIL:RSP)

• (S95087B-Licensed Feature) IMD Multiple Receiver Configurations 

What's New in VNA Code Version A.15.75.xx

• Digital Modulation Creation [Licensed Feature]

• IMD using 2 reference receivers [Licensed Feature]

• Added embedded LO setup to SMC Mixer Setup dialog

• Added four new Windows types for TDR [Licensed Feature]

What's New in VNA Code Version A.15.65

• Cal Update [Licensed Feature]

What's New in VNA Code Version A.15.60

• Support N755xA ECal modules

• Support S94USBCB

• Support L8990M Switch matrix [Licensed Feature]

What's New in VNA Code Version A.15.55

• Support S95087B/S97087B

• Window Type added to Time Domain Setup dialog [Licensed Feature]

What's New in VNA Code Version A.15.40

• Support P50xxB and P93xxB USB VNA series.

• Save/Load mixer files in CSV format [Licensed Feature]

• Support for U1832A/B/C/D and U1833A/B/C/D Noise Sources [Licensed Feature]

What's New in VNA Code Version A.15.20.07

• Change the Fixture Generator Calculation Order

What's New in VNA Code Version A.15.10

• Support Phase Control for module/unit configuration (M980xA/P50xxA)

• Support M9615A SMU (M980xA/P50xxA)

• Support S95024B Basic Pulsed-RF Measurement Lite

What's New in VNA Code Version A.14.70

• Support mult-source capability for module/unit configuration (M980xA/P50xxA)

• Support Noise Figure Converter for S9x029A/B (M980xA/P50xxA)

• Support Gain Compression Converter for S9x086A/B (M980xA/P50xxA)

• Support S9x015B Real-time S-Parameter and Power Measurement Uncertainty (M980xA/P50xxA)

• Support S9x460B Integrated True Mode Stimulus Application (M980xA/P50xxA)

• Enhance the Fixture Simulator

• Support S94050B/51B VNA simulator

• Add I/O adapter signal assignment GUI (M980xA/P50xxA)

• Add CONT:HAND:IND:LOG to set the logic of the index signal.

• Add Log Y-Axis and Complex Graph

What's New in VNA Code Version A.14.30.06

• Support M9810A and M9336A in Modulation Distortion (M980xA)

• Add LO Feedthru Monitor in Modulation Distortion (M980xA)

• Support Option 190 Vector Signal Analysis Hardware for PathWave Vector Signal Analysis (89600 VSA)  (M980xA/P50xxA)

What's New in VNA Code Version A.14.10.07

• Support Differential and I/Q device measurement (M980xA/P50xxA)

• Support Data Viewer

• Support Reference IN signal Configuration (For Multi-module of M980xA/Multi-unit of P50xxA)

• E5071C code emulator (P937xA)

What's New in VNA Code Version A.14.10

• Support the M9815A/16A/17A/18A VNA Receivers.

• Support Enhanced Time Domain Analysis. (M980xA/P50xxA)

• Support Modulation Distortion (M980xA)

• Support Multiport Calibration Assistant (M980xA/P50xxA)

• Support Multiport Calibrated Measurements with Switch (M980xA/P50xxA)

• Support PXI and Streamline Series (USB) switches, M9164A/B, M9165A/B, P9164A/B and P9165A/B

• Support S9xxxxB application software for floating/USB portable licenses. (M980xA)

• Support Multisite (M98xxA)

• Fixed Gain Cal (M980xA/P50xxA)

• Support Cal Pods

• Support U205xXA/U206xXA Series USB Power Sensors.

• Support the following items in the spectrum analysis. (M980xA/P50xxA)

  • Noise Power Ratio (NPR) measurement

  • Coherent Averaging Tab

  • Pulsed SA (Trigger & Pulse Tab, Pulse settings in source Tab)

  • Dual Band Configuration in advance tab

  • SA analysis marker

What's New in VNA Code Version A.13.90

• Support the second source. (M980xA/P50xxA)

• Maximum settable frequency is extended up to 54 GHz for 53 GHz models. (Re-calibration is required for the units shipped with older version.) (M9808A/P50x8A)

• Supports PXI switches, M9155C/CH40,M9156C/CH40, M9157C/CH40 (M980xA/M937xA)

• PLL Bandwidth selection for better phase noise (SENS:SOUR:PLLB, SENS:SOUR:PLLB:CAT) (M980xA/P50xxA)

• SA multi-module calibration tool (M980xA/P50xxA)

• Source power alignment tool (M980xA/P50xxA)

• List-sweep mode in trigger mode for external source. (M980xA/P50xxA)

• E5071C code emulator (M980xA/P50xxA)

What's New in VNA Code Version A.13.70

• Support P502xA / P5005A to 08A / M9805A to 08A

What's New in VNA Code Version A.13.40

• Support P5000A to 04A / M9800A to 04A

• Support TraceManager_Dialog

What's New in VNA Code Version A.13.50

• Support for N5252A millimeter wave banded network analyzer system

What's New in VNA Code Version A.13.10

P937xA

• Automatic Fixture Removal (Option S97007A)

• Time Domain (Option S97010A)

• Frequency Offset Measurements (Option S97080A)

• Scalar Mixer Converter (SMC) measurements (Option S97082A)

• N Port Configuration (Option S97551A)

What's New in PXIe Code Version A.12.60.02

M9485A/M937xA

• Support Ecal N469xD.

M937xA

• Support M9161D PXI Solid State Dual SP4T Switch

M9485A

• Support Shift LO

What's New in PXIe Code Version A.12.55

M9485A/M937xA

• Support Automatic Fixture Removal (Option 007)

• Support M9341B Digital/Analog I/O

• Support M9111A PXI SMU

M9485A

• Support M9161D PXI Solid State Dual SP4T Switch

• Support M9379A and M9161D control for Noise Figure measurement (Option 028)

What's New in PXIe Code Version A.12.50

M9485A

• Support Noise Figure measurement (Option 028)

• Support M9341A

• Support M9379A

What's New in PXIe Code Version A.03.10

• Support for N755xA ECal modules

What's New in PXIe Code Version A.03.00

• Ground Loop embedding/de-embedding

• Trigger Delay

• The following features are now standard:

• • Fixturing

  • • Port Z Conversion

    • 4-Port De/Embed

    • Differential Z Conversion

    • Common Mode Z Conversion

    • Differential Port Matching

    • Power Compensation

  • Port Extensions

  • Equation Editor

• CalPod

• Cal Plane Manager

What's New in PXIe Code Version A.02.00

• Measurement Speed Enhancements