EMI Mode Commands

Description

Command

Set the CISPR band (A | B | C | D | E)

[:SENSe]:CISPr:BAND

Set the EMI detector trace function

[:SENSe]:EDETector:TRACe{1:4}[:FUNCtion]

Enable/Disable the log axis view

[:SENSe]:FREQuency:AXIS:LOG

Manually set the APD resolution bandwidth

[:SENSe]:BANDwidth:APD[:RESolution]

Set the APD resolution bandwidth to automatic

[:SENSe]:BANDwidth:APD[:RESolution]:AUTO

Manually set the EMI resolution bandwidth

[:SENSe]:BANDwidth:EMI[:RESolution]

Set the EMI resolution bandwidth to automatic

[:SENSe]:BANDwidth:EMI[:RESolution]:AUTO

Set the EMI measurement type (FBSC | CBSC | CZSC | SAPD)

[:SENSe]:MEASurement[:SELect]

Set the APD statistics dwell time when the internal source steps to the next frequency

[:SENSe]:SWEep:ADP:DWELl

Set the EMI dwell time when the internal source steps to the next frequency

[:SENSe]:SWEep:EMI:DWELl

Sets the trace value for the APD statistics input (CCDF | Historgram)

TRACe{1:4}:APD:INPut.

Description

Command

Center freq

[:SENSe]:FREQuency:CENTer

Step size for up/down keys

[:SENSe]:FREQuency:CENTer:STEP

Step size auto/manual

[:SENSe]:FREQuency:CENTer:STEP:AUTO

Freq span

[:SENSe]:FREQuency:SPAN

Span to full

[:SENSe]:FREQuency:SPAN:FULL

Span to zero

[:SENSe]:FREQuency:SPAN:ZERO

Start freq

[:SENSe]:FREQuency:STARt

Stop freq

[:SENSe]:FREQuency:STOP

Frequency annotation method

[:SENSe]:FREQuency:ANNotation[:SELect]

Attenuation value

[:SENSe]:POWer[:RF]:ATTenuation

Atten Auto/Manual

[:SENSe]:POWer[:RF]:ATTenuation:AUTO

Set external gain value

[:SENSe]:POWer[:RF]:EXTGain

Preamp ON/OFF

[:SENSe]:POWer[:RF]:GAIN[:STATe]

Read number of traces.

[:SENSe]:QUANtity:TACTive?

Sweep time (Non-zerospan)

[:SENSe]:SWEep:ACQuisition

Sweep time (Zerospan)

[:SENSe]:SWEep:TIME

Read sweep time

[:SENSe]:SWEep:MTIMe?

Auto / Manual

[:SENSe]:SWEep:ACQuisition:AUTO

Sweep points

[:SENSe]:SWEep:POINts

Sweep Type

[:SENSe]:SWEep:TYPe

Reverse sweep (Step sweep and Opt. 209 only)

[:SENSe]:FREQuency:SPAN:DREVerse

Auto Scale trace

DISPlay:WINDow:TRACe:Y[:SCALe]:AUTO

Per division

DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision

Reference level

DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel

Reference position

DISPlay:WINDow:TRACe:Y[:SCALe]:RPOSition

Log / Linear scale

[:SENSe]:AMPLitude:SCALe

Set Units

[:SENSe]:AMPLitude:UNIT

Read ONLY - Bottom scale value

DISPlay:WINDow:TRACe{1:4}:Y[:SCALe]:BOTTom

Read ONLY - Top scale value

DISPlay:WINDow:TRACe{1:4}:Y[:SCALe]:TOP

Average count

[:SENSe]:AVERage:COUNt

Averaging type

[:SENSe]:AVERage:TYPE

Restart trace averaging

INITiate:RESTart

Manual Res BW value

[:SENSe]:BANDwidth[:RESolution]

Choose Auto or Manual Res BW

[:SENSe]:BANDwidth[:RESolution]:AUTO

Manual Video BW value

[:SENSe]:BANDwidth:VIDeo

Choose Auto or Manual Video BW

[:SENSe]:BANDwidth:VIDeo:AUTO

IF Output

[:SENSe]:BANDwidth:IF:OUT

Set Trace Type

TRACe{1:4}:TYPE

Returns the current trace X-values

TRACe{1:4}:XVALue

Detector function

[:SENSe]:DETector:FUNCtion

Align all now (coupled to all individual alignments)

[:SENSe]:ALIGnment:AMPLitude:NOW

Align all state (coupled to all individual alignments)

[:SENSe]:ALIGnment:ALL[:STATe]

InstAlign state

[:SENSe]:ALIGnment:AMPLitude[:STATe]

RF burst now (Not applicable to ERTA)

[:SENSe]:ALIGnment:BURSt:NOW

RF burst state (Not applicable to ERTA)

[:SENSe]:ALIGnment:BURSt[:STATe]

Enables/disables the PSD function

[:SENSe]:AMPLitude:PSDFunction

Query a file catalog

:INSTrument:CATalog?

Enables front panel key press control

:INSTrument:GTL

Disables front panel key press control (Lockout)

:INSTrument:GTR

Set and query the status of the remote SCPI lockout

:INSTrument:RLOCkout:DISable

Sets the current mode

:INSTrument[:SELect]

Limit line beep

CALCulate[:SELected]:LIMit:SOUNd

Create limit lines

CALCulate:LIMit:LLData

Limit line testing state

CALCulate:LIMit[:STATe]

Limit line testing annotation

CALCulate:LIMit:WARN

Limit line Auto Sync

CALCulate:LIMit:SYNC

Display Line level setting

DISPlay:WINDow:TRACe:Y:DLINe

Display Line state

DISPlay:WINDow:TRACe:Y:DLINe:STATe

Read Pass/Fail

STATus:QUEStionable:LIMit:CONDition?

Build Limit from Trace

None

Read Trace Data

TRACe{1:4}:DATA

Saves trace to CSV file.

MMEMory:STORe:FDATa

CW or S/R

SOURce:MODE

CW Frequency

SOURce:FREQuency[:CW]

Normalize

SOURce:NORMalize

Power Level (All models EXCEPT N9912A)

SOURce:POWer

Max Power (All models EXCEPT N9912A)

SOURce:POWer:MAXimum

Attenuation (power) N9912A ONLY

SOURce:POWer:ATTenuation

Enable Source Tracking

SOURce:TRACking

All corrections OFF

[:SENSe]:AMPLitude:CORRections:DISable

All corrections ON

[:SENSe]:AMPLitude:CORRections[:STATe] (SUPERSEDED)

Enable

SOURce:TOFFset:ENABle

Set frequency

SOURce:TOFFset:FREQuency

Reverse frequency

SOURce:TOFFset:REVerse

Antenna corrections ON

[:SENSe]:AMPLitude:CORRections:ANTenna[:STATe]

Cable corrections ON

[:SENSe]:AMPLitude:CORRections:CABLe[:STATe]

Load Antenna file

MMEMory:LOAD:ANTenna

Store Antenna file

MMEMory:STORe:ANTenna

Clear Antenna correction values

[:SENSe]:AMPLitude:CORRections:ANTenna:DEFault

Load Cable file

MMEMory:LOAD:CABLe

Store Cable file

MMEMory:STORe:CABLe

Clear Cable correction values

[:SENSe]:AMPLitude:CORRections:CABLe:DEFault

Antenna corrections ON

[:SENSe]:AMPLitude:CORRections:SANTenna[:STATe]

Cable corrections ON

[:SENSe]:AMPLitude:CORRections:SCABle[:STATe]

Load Antenna file

MMEMory:LOAD:SANTenna

Store Antenna file

MMEMory:STORe:SANTenna

Clear Antenna correction values

[:SENSe]:AMPLitude:CORRections:SANTenna:DEFault

Load Cable file

MMEMory:LOAD:SCABle

Store Cable file

MMEMory:STORe:SCABle

Clear Cable correction values

[:SENSe]:AMPLitude:CORRections:SCABle:DEFault

Set and query the antenna's angle of azimuth reference value

[:SENSe]:ANTenna:ANGLe:AZImuth:REFerence

Set and query the antenna's angle of azimuth start value

[:SENSe]:ANTenna:ANGLe:AZImuth:STARt

Set and query the antenna's angle of azimuth step value

[:SENSe]:ANTenna:ANGLe:AZImuth:STEP

Set and query the antenna's angle of azimuth stop value

[:SENSe]:ANTenna:ANGLe:AZImuth:STOP

Set and query the elevation angle reference value

[:SENSe]:ANTenna:ANGLe:ELEVation:REFerence

Set and query the antenna's angle of elevation start value

[:SENSe]:ANTenna:ANGLe:ELEVation:STARt

Set and query the antenna's angle of elevation step value

[:SENSe]:ANTenna:ANGLe:ELEVation:STEP

Set and query the antenna's angle of elevation stop value

[:SENSe]:ANTenna:ANGLe:ELEVation:STOP

Sets the current azimuth angle

[:SENSe]:ANTenna:ANGLe:INDex:X

Sets the current elevation angle

[:SENSe]:ANTenna:ANGLe:INDex:Y

Sets the North angle on compass

[:SENSe]:ANTenna:COMPass:NORth

Display size of Polar graph and trace

[:SENSe]:ANTenna:DISPlay:POLar:ANGle

Sets the Polar display background image (i.e., if image loaded)

[:SENSe]:ANTenna:DISPlay:POLar:BACKground:IMAGe:STATe

Sets the display compass on the polar display

[:SENSe]:ANTenna:DISPlay:POLar:COMPass:IMAGe:STATe

Sets the display size of the Polar graph and trace

[:SENSe]:ANTenna:DISPlay:POLar:TYPe

Sets the antenna center frequency

[:SENSe]:ANTenna:FREQuency

Query the last measured point

[:SENSe]:ANTenna:RESult?

Sets the antenna orientation

SYSTem:ANTenna:USB:AXIS (SUPERSEDED) is not recommended and has a new recommended behavior:

SYSTem:ANTenna:EMF:AXIS

Import antenna correction factors from USB antenna.

SYSTem:ANTenna:USB:IMPort (SUPERSEDED) is not recommended and has a new recommended behavior:

SYSTem:ANTenna:EMF:IMPort

Import antenna correction factors CSV file for EMF antenna type FSH3D

SYSTem:ANTenna:EMF:IMPort:FILe

SYSTem:ANTenna:USB:TYPe (SUPERSEDED) is not recommended and has a new recommended behavior:

SYSTem:ANTenna:EMF:TYPe

Presets the antenna

SYSTem:PRESet:ANTenna

SA Mode Frequency Converter Only:

Enable/disables frequency converter corrections of head

[:SENSe]:AMPLitude:CORRections:CONVerter:DEFault

Clears the frequency converter corrections table

[:SENSe]:AMPLitude:CORRections:CONVerter[:STATe]     

Recalls a frequency converter corrections file (*csv)

MMEMory:LOAD:CONVerter

Saves a freqeuncy converter corrections file (*csv)

MMEMory:STORe:CONVerter

All Frequency Converter Compatible Modes:

Sets frequency converter corrections to "Auto" or "Edit SA"

SYSTem:HEAD:CORRections:ASETup

Shares frequency extender head corrections from SA mode

SYSTem:HEAD:CORRections[:STATe]

Enables/disables the high sensitivity state.

SYSTem:HEAD:HIGHsense[:STATe]

Enables/disables the frequency extender.

SYSTem:HEAD[:STATe]

Selects a frequency extender head file to load.

MMEM:LOAD:HEAD

ADC Over-range status

CALCulate:MEASurement:WAORange?

01june2022

New commands (A12.4x)

17aug2021

New mode and commands (A12.3x)